Using SE14 to delete Master Data

Hi,
I have to delete master data of several InfoObjects and I'm trying to find a way of doing it as fast as possible, eventhough I have many dependences between InfoObjects.
I know I can use transaction code SE14 to delete master data, but I do not know if it will also check the dependences between other objects as if I do the deletion using the context menu on an InfoObject. Can anybody clarify this for me please?
Thanks,
Miriam

SE14 will not check dependencies. To delete master data see the following link
Deletion of master data (RSDMD126) in BW

Similar Messages

Deleting master data after loading transactional data using flat file

Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
Veera

Hi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan.

Delete Master Data using Process Chain?

Hi Friends,
How do I delete Master Data using Process Chain?
Thanks,
Pradeep

Hi Bhanu,
I am not sure why we would want to delete MD. But that is the task given to me. I actually know it is not possible. But is there a way to delete MD using chains?
Thanks,
Pradeep

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Delete Master Data - with or without sids

Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thank

Hi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan

Deleting Master Data

Hi All,
I am trying to delete master data in a process chain.
But its not working , the chin is executing but the function module RSDMD_DEL_MASTER_DATA is retuning the message " No master Data was Deleted".
Please suggest how to fix this.
Appreciate help,
Deepthi

Hi Deepthi
Before deleting the master data.have look at transaction data like any dependency data is there r not.If the the trans action data is present then u can just delete that thing then only u have the option of deleting the master data in case of process chains.if any let me know.If my answer is useful dont for get to assign points.
Best regards
RK
Assigning is the only way of saying thanx in SDN*****

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Error : Concatenated values used in documents for master data

Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AM

Hi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima

How to delete master data via process chain

Hi All,
I have to delete master data before loading it again via a process chain.
In the process chain I chose the process " complete deletion of the data target content" but here I did not find infoobject as the data target option to delete the data.
Please suggest how to solve this.
Thanks,
Harini

Hi Harini,
P_CHABNM - It is for the reference characteristic.
I think if you dont have a ref characteristic then give the info-object name.
This is what I fetched fom help.
Reference characteristic
The reference characteristic has the technical properties of a characteristic such as data type and length, as well as the master data (attributes, texts and hierarchies). The characteristic itself also has buinesses semantics. Several characteristics can refer to the same reference characteristic. Such characteristics automatically have the same technical properties and master data.
Example:
The characteristics sender cost center and receiver cost center use the reference characteristiccost center and with it the same values and the same texts.
Bye
Dinesh

Cannot delete Master Data on 0MATERIAL...

"Cannot delete Master Data on 0MATERIAL...... some records still in use"
Hi, I am facing an issue where I would like to delete ALL 0MATERIAL records and load them again but I am getting the above message.
Would very much appreciate any feedback.
thks,
Alex

Guys, thank you all.
That went smooth.
When I executed the SLG1 log it showed me was still data in some InfoProviders.
SOLVED DOING
a- Deleting data from such infoproviders (from log).
b- Trying again to delte 0MATERIAL data.
c- Error again.
d- SLG1
e- Identify form SLG1
a- delete content from Cube/DSO/Object...
b- trying again to delete 0MATERIAL...
Until all data got deleted and I was allowed to delete 0MATERIAL data.
First, delete the master data from the places where it is still being used (for example, in InfoCubes, as an attribute, in a hierarchy). Refer to the application log: Transaction slg1, object RSDMD, sub-object MD_DEL. The application log contains a list showing you whether the master data has been deleted or if it is still in use, and if so where it is being used. The list is complete only when you confirm that you want to delete all the master data that is in use.
(Which I think Srinivas mentioned already)
QUESTION: I though when we delete Request we delete data from Cube (or DSO...) though as per SLG1 log was showing some cubes contained data.
Has this to to with E and F table ?
thks

Re: delete master data

Hi All,
How to delete master data. I tried delete master data from the context menu of infoobject.
But it says some of master data not delted. I deleted all the transaction data exist for that master data.
But still i am not able to delete the master data.
Pls provide me the solution.
Regards,
Anand

1.Ideal way is right click and delete master data .
2.Also you may right click > maintain master data->execute-->select all >click on delete icon>SAVE
3.You may use func module SUBST_DELETE_TABLE_CONTENT.
Kindly check where used list of that infobject in transport connection , delete data from dependent infoproviders and then try deleting master data.
Edited by: Neetika Sharma on Jun 22, 2010 9:43 AM

DELETING Master Data from 0Material

Guys I am trying to Delete Data from 0Material, but when I run the FM RSATREE_PSA_DELETE_BATCH and check on T-Code 'slg1' it says the following,
<b>"Master data 070-310-0 (SID 652) is used in ZCONSIGNED_INVENTORY_BYMONTH and, therefore, not deleted."</b>
I have never come across where a query will be blocking data. The only thing that comes to mind is that it could be restricted by the data from the cube, and that is making it block the data.
Having said that, when I try to open the query , it is all greyed out. And I have also tried deleting the query by T-code "rszdelete", but it comes back with the following message
"Query object EU3SUSBZ4KR0Z75SUZRNBDSX0 is blocked. Deletion has been cancelled."
any ideas!!!

Hi,
no you just can't "clear" these table unless you want to screw your datawarehouse....
the first message means that the material with SID 7 is used in a hierachy of 0MATERIAL ==> adjust the hierarchy first.
the second message indicates that the material with SID 5316 is used in the ICube 0RT_C07 and you CANNOT delete master data if it is used in other objects.
First run RSRV for this dimension in order to see if the DIMID is really used by the fact table. Perform the following test "Entries Not Used in the Dimension of an InfoCube " with your cube and dim.
if the DIMID is not used then "correct" the error; you'll then be able to delete your SID.
If the DIMID is used then you'll have to delete your cube data if you really want to delete this material; otherwise you'll have to keep it.
Finally rerun you master data deletion.
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 31, 2008 9:07 AM

Approach to deleting master data from BW

Hi Gurus,
Is there a way to quicly delete master data from BW? Since the master data object have dependencies with ither objects its taking me forever to go and delete it one by one...i go to the where used list ..delete the contents of the object in the where used list and then some back to delete the contents of the intial object..
kindly let me know if there is a faster way of doing it...
Thanks,
Nip

Hi,
You can use reports:
RSDRD_DELETE_FACTS
and
RSDMD_DEL_BACKGROUND
Pls chk this links on the same topic:
Delete Unused Master Data
Re: Cleanup of Master Data
Re: Could not delete master data
Hope it helps.
Regards
CSM Reddy

It's failed to try to delete master data

Hi folks,
I'm on BI 7.0
When I try to delete master data of infoobject ZCCPT_S, it's failed,
The error message is shown below:
System error: RSDU_UTIL_ORA/FORM TRUNCATE_TABLE 54 /BIC/SZCCPT_S
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = RSDU_UTIL_ORA/FORM TRUNCATE_TABLE
Parameter 2 = 54
Parameter 3 = /BIC/SZCCPT_S
Parameter 4 =
Anyone can help me to solve the problem?
Or do I have to delete this infoobject and recreate it, then transport to PRD system?
Thanks in advance
Ji xiaodong

Hi,
infoobject ZCCPT_S is used in any infooprovider (DSO or Cube), first delete the data in that and then try to delete master data for this infoobject, there is error deleting infoobjects SID's. i think that is why this error is coming. so first delete the data in infoproviders.
go to infoobject ZCCPT_S -> using where used list see where it is used .
Regards
Daya Sagar

Deleting Master Data via Process Chain

I am in the midst of creating a process chain and am able to create process for deleting ODS Contents, but am not able to do the same for Master Data. Is this possible?

Firstly, why do you want to delete master data.
You cannot delete master if the same is used across other transaction and master ( attr )data.
You may use :
Prg - > RSDMD_DEL_BACKGROUND
FM - >RSDMD_DEL_MASTER_ DATA.
To my knwldge you cannot delete MD using process chains.
You can delete data in PSA periodically..is that you are looking for ?

Using SE14 to delete Master Data

Similar Messages

Maybe you are looking for