Using sequence in forms

How to reset a sequence if the insert has not happened? the sequence gets incremented even if the record is not saved

I have the same question before and here is the answer from this forum.
Place your code for incrementing the sequence in the Pre-insert trigger
example:
BEGIN
SELECT room_sequence.nextval INTO :blk_rooms.ref_no FROM DUAL;
END;
You could reset the sequence by dropping and recreating the sequence.

Similar Messages

How to use Sequence in Forms

Hi,
I have an Empno Column, At the time of Opening a Form The Empno Will be displayed by using Sequence.
If the User doesn't save the Form Then the Empno Generated number will be changed.
How to write the code to get sequence numbers at Empno columns by using Sequence?
Thanks & Regards,
Hari Babu

Ok, I understand now your question. Since the oracle sequence is commited in a separate transaction, it is not possible to get the no-gap sequence, considering your example. In the other hand, if you don't commit immediately, than two concurrently opened forms could use the same sequence number, so you'll get the duplicate key!
If you're sure that this couldn't happen, you can manage your own sequencing, storing them in another table. Let's say you reached seq 999: entering the form, you'll read from your sequence table 1000, increment to 1001, and assign it to empno, but without commiting. Next time, you'll get the same number, until you commit form, and at the same time, change in seq table. So another will get 1001.
Downside of this approach are, as mentioned before, concurrent sessions, which will get the same sequence.

Sequence in forms

I want to use oracle sequence in form to increment column Id of table.
How to use it in form so that sequence should not increase in case of rollback.

Hello,
There is no way to do that.
When you select the Sequence.NEXTVAL, it is increased, even if you issue a rollback after.
Francois

Triggers Firing Sequence Of Forms 10g after commit_form trigger.

hi all,
please tell me Triggers Firing Sequence Of Forms 10g after commit_form trigger.
thanks,
Regards,
Ambarish

Hi,
I have a doubt regarding the sequence of events when COMMIT_FORM is fired.
Using the following to trigger the event.
DO_KEY('COMMIT'_FORM');
Added debug messages in my form triggers and found that after the ON-INSERT trigger is fired, the WHEN-VALIDATE-RECORD is fired and then the PRE-RECORD.
However this sequence is not specified in the lists of firing sequences mentioned here.
Is it possible to change the sequence programmatically.
In my ON-INSERT trigger, calling a DB procedure to insert row in the table.
Thanks
Asfa

Using Sequence

Hi Everyone,
Is there any way that we can assign/attach a sequence to the column of a table, actually the requirement is that I have table, in which a third party will be inserting the data and they want me to attach a sequence to column where that sequence should generate a auto number upon inserting each record.
As far as I knew that we can use sequence thru a form to insert auto numbers.
Any help will be appreciated.
Thanks in advance
Ahon

Is there a simple way to return the value generated to the form?
Forms 6i, 9i database.
I have a basic form that allows the user to insert a record into a table CALL_HISTORY. That table has a BEFORE INSERT trigger that gets a sequence value and uses it as the primary key, CALL_ID.
Now on the form post-save I want the call_id display field populated with this new value. I can't query for it as none of the other data is unique. Surely Forms must have some function to do this?

MAX(SummaryNum) +1 bad idea, but how to use sequence part composite column

Hi,
My relational mode is as follows
Policy (policynum PK) has 1:M with Summary (policynum FK, SummaryNum part of PK, other columns part of PK)
Basically for each policy users can enter notes with SummaryNum 1, 2, 3, 4.... These numbers are shown to the user for tracking purpose. I need to make sure summary notes for EACH policy start with 1 (cannot really use sequence in the table in the strictest sense) and are incremented by 1. The current Oracle form basically creates the next highest possible value of SummaryNum by adding one to the currently available highest value. In brief, it is like a sequence number for summaries of a particular policy in the summary table.
PRE-INSERT
SELECT MAX(SummaryNum ) + 1
FROM Summary
I am trying to replicate this in ADF BC (using 11g) and know that not using sequencing and adding one to get the next number is a very bad idea due to concurrency challenges (transactional ACID properties). The reasons are as follows.
•     Using MAX(policy_memo_seq_num) + 1 is not scalable,
•     It will lead to duplicates in a multi-user environment, whether ADF BC, Oracle Forms, or any other technology
I also know how to use create a sequence in db, a related trigger, and then set the attribute in EO properties as DBSequence. My challenge is that since SummaryNum is not a primary key, and instead is part of a composite key in my case, how do I make sure that summary notes for EACH policy start with 1 in the Summary Table.
I appears that i cannot really use sequence in the table in the strictest sense as this will mean that for policies the summaryNum will start from the next available sequence number, but what i really want is to have it start by one for all policies.*
I would appreciate any help.
Thanks,

Not sure if there is a better way, but here is one way. Let's say your table was like this:
    SQL> desc versioned_item
     Name         Null?    Type
     ID           NOT NULL NUMBER
     VERSION      NOT NULL NUMBER
     DESCRIPTION           VARCHAR2(20)and lets say your data looked like this:
    SQL> select * from versioned_item order by id, version
            ID    VERSION DESCRIPTION
          1001          1 Item 1001
          1001          2 Item 1001
          1001          3 Item 1001
          1002          1 Item 1002
          1002          2 Item 1002
          1003          1 Item 1003To select only the rows for the max-version-id, you could do this:
    select id, version,description
    from versioned_item
    where (id,version) in (select id,max(version) from versioned_item group by id)
    order by id
            ID    VERSION DESCRIPTION
          1001          3 Item 1001
          1002          2 Item 1002
          1003          1 Item 1003To capture this as a view object, you'd only just need to paste in the WHERE clause above into the Where clause box of the view object. No need to use expert-mode since you're not changing the select list or from clause.

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This is a IRS form and has worked before.

I am trying to use a interactive form and it says "see below" This is a IRS form and has worked before.
is there a tech support phone number?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
Either
download the form to your local disk and fill it from there
use a browser that employs the Adobe Reader plugin
configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

Questions about using a PDF form online

I have a client who wants to create an online version of a PDF form that they are currently using. I am currently trying to explain to them that this would be best done as an HTML web form, but I may not win this argument. I have only used PDFs for printed forms (either hand-written or using form fields) so I am not familiar with any problems that converting the form for use online would entail.
When the 'Submit' button is pressed on the form, is there a way to redirect to another web page after the data is submitted? (i.e. does the PDF have access to it's outer 'environment'?)
Are there any security issues submitting data using the PDF form as opposed to using a standard web form? (There may be sensitive data being submitted)
I'm not sure how they plan to handle the data that is submitted, but there are several options in the submitForm parameters - I am assuming that using the HTML option would submit the data in the same format as a web form would. Am I correct here?
Can the PDF be prevented from being downloaded or printed? This form should only be used to submit data to their server, not as a printed form.
Are there any other 'gotchas' that I need to look out for? Does anyone have a recommendation for a site which contains any tutorials or guidelines for using PDF forms online?

Thanks for the information.
Yes, I agree that there is less reason for it to be a PDF form (Actually, no real reason other than the original form already exists in PDF), but I am unfortunately in the position that my input in this project is not necessarily being considered (my company is following direct -and inconsistent- directions from the client, and I have no contact with the client to ask questions about what their actual needs are). I have been told to give the client the 'Tomato' that they are asking for, even though they are describing an 'Apple'.
The reason this form is not meant to be printed is that we have replaced the 'Signature' fields from the original form with checkboxes that the user must check to confirm they have 'signed' the document. If they are to print/fax/whatever the document, they should use the original form, not this one. And I am still trying to explain to them that this would be better served with an HTML web form, but I fear I am losing that battle.
I have brought up the fact that it is not 100% guaranteed that Acrobat will be available in the browser, although I can only guess that it is less than likely that anyone will not have some sort of PDF viewer available to their browser.
I will also mention that issues may arise if the file is not submitted from within the browser.

Using container managed form-based security in JSF

h1. Using container managed, form-based security in a JSF web app.
A Practical Solution
h2. {color:#993300}*But first, some background on the problem*{color}
The Form components available in JSF will not let you specify the target action, everything is a post-back. When using container security, however, you have to specifically submit to the magic action j_security_check to trigger authentication. This means that the only way to do this in a JSF page is to use an HTML form tag enclosed in verbatim tags. This has the side effect that the post is not handled by JSF at all meaning you can't take advantage of normal JSF functionality such as validators, plus you have a horrible chimera of a page containing both markup and components. This screws up things like skinning. ([credit to Duncan Mills in this 2 years old article|http://groundside.com/blog/DuncanMills.php?title=j2ee_security_a_jsf_based_login_form&more=1&c=1&tb=1&pb=1]).
In this solution, I will use a pure JSF page as the login page that the end user interacts with. This page will simply gather the input for the username and password and pass that on to a plain old jsp proxy to do the actual submit. This will avoid the whole problem of having to use verbatim tags or a mixture of JSF and JSP in the user view.
h2. {color:#993300}*Step 1: Configure the Security Realm in the Web App Container*{color}
What is a container? A container is basically a security framework that is implemented directly by whatever app server you are running, in my case Glassfish v2ur2 that comes with Netbeans 6.1. Your container can have multiple security realms. Each realm manages a definition of the security "*principles*" that are defined to interact with your application. A security principle is basically just a user of the system that is defined by three fields:
- Username
- Group
- Password
The security realm can be set up to authenticate using a simple file, or through JDBC, or LDAP, and more. In my case, I am using a "file" based realm. The users are statically defined directly through the app server interface. Here's how to do it (on Glassfish):
1. Start up your app server and log into the admin interface (http://localhost:4848)
2. Drill down into Configuration > Security > Realms.
3. Here you will see the default realms defined on the server. Drill down into the file realm.
4. There is no need to change any of the default settings. Click the Manage Users button.
5. Create a new user by entering username/password.
Note: If you enter a group name then you will be able to define permissions based on group in your app, which is much more usefull in a real app.
I entered a group named "Users" since my app will only have one set of permissions and all users should be authenticated and treated the same.
That way I will be able to set permissions to resources for the "Users" group that will apply to all users that have this group assigned.
TIP: After you get everything working, you can hook it all up to JDBC instead of "file" so that you can manage your users in a database.
h2. {color:#993300}*Step 2: Create the project*{color}
Since I'm a newbie to JSF, I am using Netbeans 6.1 so that I can play around with all of the fancy Visual Web JavaServer Faces components and the visual designer.
1. Start by creating a new Visual Web JSF project.
2. Next, create a new subfolder under your web root called "secure". This is the folder that we will define a Security Constraint for in a later step, so that any user trying to access any page in this folder will be redirected to a login page to sign in, if they haven't already.
h2. {color:#993300}*Step 3: Create the JSF and JSP files*{color}
In my very simple project I have 3 pages set up. Create the following files using the default templates in Netbeans 6.1:
1. login.jsp (A Visual Web JSF file)
2. loginproxy.jspx (A plain JSPX file)
3. secure/securepage.jsp (A Visual Web JSF file... Note that it is in the sub-folder named secure)
Code follows for each of the files:
h3. {color:#ff6600}*First we need to add a navigation rule to faces-config.xml:*{color}
    <navigation-rule>
<from-view-id>/login.jsp</from-view-id>
        <navigation-case>
<from-outcome>loginproxy</from-outcome>
<to-view-id>/loginproxy.jspx</to-view-id>
        </navigation-case>
    </navigation-rule>
NOTE: This navigation rule simply forwards the request to loginproxy.jspx whenever the user clicks the submit button. The button1_action() method below returns the "loginproxy" case to make this happen.
h3. {color:#ff6600}*login.jsp -- A very simple Visual Web JSF file with two input fields and a button:*{color}
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
    <jsp:directive.page
contentType="text/html;charset=UTF-8"
pageEncoding="UTF-8"/>
    <f:view>
        <webuijsf:page
id="page1">
<webuijsf:html id="html1">
<webuijsf:head id="head1">
<webuijsf:link id="link1"
url="/resources/stylesheet.css"/>
</webuijsf:head>
<webuijsf:body id="body1" style="-rave-layout: grid">
<webuijsf:form id="form1">
<webuijsf:textField binding="#{login.username}"
id="username" style="position: absolute; left: 216px; top:
96px"/>
<webuijsf:passwordField binding="#{login.password}" id="password"
style="left: 216px; top: 144px; position: absolute"/>
<webuijsf:button actionExpression="#{login.button1_action}"
id="button1" style="position: absolute; left: 216px; top:
216px" text="GO"/>
</webuijsf:form>
</webuijsf:body>
</webuijsf:html>
        </webuijsf:page>
    </f:view>
</jsp:root>h3. *login.java -- implent the
button1_action() method in the login.java backing bean*
    public String button1_action() {
        setValue("#{requestScope.username}",
(String)username.getValue());
setValue("#{requestScope.password}", (String)password.getValue());
        return "loginproxy";
    }h3. {color:#ff6600}*loginproxy.jspx -- a login proxy that the user never sees. The onload="document.forms[0].submit()" automatically submits the form as soon as it is rendered in the browser.*{color}
{code}
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
version="2.0">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-W3CDTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html"
pageEncoding="UTF-8"/>
<html>
<head> <meta
http-equiv="Content-Type" content="text/html;
charset=UTF-8"/>
<title>Logging in...</title>
</head>
<body
onload="document.forms[0].submit()">
<form
action="j_security_check" method="POST">
<input type="hidden" name="j_username"
value="${requestScope.username}" />
<input type="hidden" name="j_password"
value="${requestScope.password}" />
</form>
</body>
</html>
</jsp:root>
{code}
h3. {color:#ff6600}*secure/securepage.jsp -- A simple JSF{color}
target page, placed in the secure folder to test access*
{code}
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
<jsp:directive.page
contentType="text/html;charset=UTF-8"
pageEncoding="UTF-8"/>
<f:view>
<webuijsf:page
id="page1">
<webuijsf:html id="html1">
<webuijsf:head id="head1">
<webuijsf:link id="link1"
url="/resources/stylesheet.css"/>
</webuijsf:head>
<webuijsf:body id="body1" style="-rave-layout: grid">
<webuijsf:form id="form1">
<webuijsf:staticText id="staticText1" style="position:
absolute; left: 168px; top: 144px" text="A Secure Page"/>
</webuijsf:form>
</webuijsf:body>
</webuijsf:html>
</webuijsf:page>
</f:view>
</jsp:root>
{code}
h2. {color:#993300}*_Step 4: Configure Declarative Security_*{color}
This type of security is called +declarative+ because it is not configured programatically. It is configured by declaring all of the relevant parameters in the configuration files: *web.xml* and *sun-web.xml*. Once you have it configured, the container (application server and java framework) already have the implementation to make everything work for you.
*web.xml will be used to define:*
- Type of security - We will be using "form based". The loginpage.jsp we created will be set as both the login and error page.
- Security Roles - The security role defined here will be mapped (in sun-web.xml) to users or groups.
- Security Constraints - A security constraint defines the resource(s) that is being secured, and which Roles are able to authenticate to them.
*sun-web.xml will be used to define:*
- This is where you map a Role to the Users or Groups that are allowed to use it.
+I know this is confusing the first time, but basically it works like this:+
*Security Constraint for a URL* -> mapped to -> *Role* -> mapped to -> *Users & Groups*
h3. {color:#ff6600}*web.xml -- here's the relevant section:*{color}
{code}
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>SecurePages</web-resource-name>
<description/>
<url-pattern>/faces/secure/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
<http-method>HEAD</http-method>
<http-method>PUT</http-method>
<http-method>OPTIONS</http-method>
<http-method>TRACE</http-method>
<http-method>DELETE</http-method>
</web-resource-collection>
<auth-constraint>
<description/>
<role-name>User</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name/>
<form-login-config>
<form-login-page>/faces/login.jsp</form-login-page>
<form-error-page>/faces/login.jsp</form-error-page>
</form-login-config>
</login-config>
<security-role>
<description/>
<role-name>User</role-name>
</security-role>
{code}
h3. {color:#ff6600}*sun-web.xml -- here's the relevant section:*{color}
{code}
<security-role-mapping>
<role-name>User</role-name>
<group-name>Users</group-name>
</security-role-mapping>
{code}
h3. {color:#ff6600}*Almost done!!!*{color}
h2. {color:#993300}*_Step 5: A couple of minor "Gotcha's"_ *{color}
h3. {color:#ff6600}*_Gotcha #1_*{color}
You need to configure the "welcome page" in web.xml to point to faces/secure/securepage.jsp ... Note that there is *_no_* leading / ... If you put a / in there it will barf all over itself .
h3. {color:#ff6600}*_Gotcha #2_*{color}
Note that we set the <form-login-page> in web.xml to /faces/login.jsp ... Note the leading / ... This time, you NEED the leading slash, or the server will gag.
*DONE!!!*
h2. {color:#993300}*_Here's how it works:_*{color}
1. The user requests the a page from your context (http://localhost/MyLogin/)
2. The servlet forwards the request to the welcome page: faces/secure/securepage.jsp
3. faces/secure/securepage.jsp has a security constraint defined, so the servlet checks to see if the user is authenticated for the session.
4. Of course the user is not authenticated since this is the first request, so the servlet forwards the request to the login page we configured in web.xml (/faces/login.jsp).
5. The user enters username and password and clicks a button to submit.
6. The button's action method stores away the username and password in the request scope.
7. The button returns "loginproxy" navigation case which tells the navigation handler to forward the request to loginproxy.jspx
8. loginproxy.jspx renders a blank page to the user which has hidden username and password fields.
9. The hidden username and password fields grab the username and password variables from the request scope.
10. The loginproxy page is automatically submitted with the magic action "j_security_check"
11. j_security_check notifies the container that authentication needs to be intercepted and handled.
12. The container authenticates the user credentials.
13. If the credentials fail, the container forwards the request to the login.jsp page.
14. If the credentials pass, the container forwards the request to *+the last protected resource that was attempted.+*
+Note the last point! I don't know how, but no matter how many times you fail authentication, the container remembers the last page that triggered authentication and once you finally succeed the container forwards your request there!!!!+
+The user is now at the secure welcome page.+
If you have read this far, I thank you for your time, and I seriously question your ability to ration your time pragmatically.
Kerry Randolph

If you want login security on your web app, this is one way to do it. (the easiest way i have seen).
This method allows you to create a custom login form and error page using JSF.
The container handles the actual authentication and protection of the resources based on what you declare in web.xml and sun-web.xml.
This example uses a statically defined user/password, stored in a file, but you can also configure JDBC realm in Glassfish, so that that users can register for access and your program can store the username/passwrod in a database.
I'm new to programming, so none of this may be a good practice, or may not be secure at all.
I really don't know what I'm doing, but I'm learning, and this has been the easiest way that I have found to add authentication to a web app, without having to write the login modules yourself.
Another benefit, and I think this is key ***You don't have to include any extra code in the pages that you want to protect*** The container manages this for you, based on the constraints you declare in web.xml.
So basically you set it up to protect certain folders, then when any user tries to access pages in that folder, they are required to authenticate.
--Kerry

Unable to close browser when using Adobe Interactive Form

Hello,
I'm using an Interactive Form in my Web Dynpro application. Everything works fine, but when the view with the Interactive Form is active, I am not able to close the browser window anymore. Moving to another view is also not possible.
I already changed all the options of the Interactive Form but always the same behaviour.
I am developing on Web AS 6.40, Service Pack 11. ADS is installed also with Service Pack 11.
Adobe Reader is Version 7.0 and Adobe Designer is Version 7.1
Has anyone an idea what's wrong?
Thanks for your help!
Best regards
Christian

Hi,
I am facing a problem with viewing SAP interactive forms.
I have the SAPForms.api in Adobe reader plugins but is outdated (19th apr, 05). How do I get the new one and how do I register it ? This same scenario works on a colleague's machine with same config except the SAPForms.api which is latest. (Nov, 05)
Any pointers will be highly appreciated.
Thanks,
Samar

How to use a SAME form between two JSP ?

Hi,
I have a JSP called jsp1 that use a form called form1.
I use the next line in jsp1 to tell this :
<jsp:useBean id="form1" class="Form" scope="request"/>
In struts-config :
<form-beans>
<form-bean name="form1" type="Form"/>
</form-beans>
<action path="/jsp" type="Action" name="Form" scope="request">
<forward name="success" path="jsp2.jsp"/>
</action>
In the action linked to this form, I populate my form.
Next, I would like, in the second JSP jsp2, to USE THE SAME FORM form1, so that I can use some datas I have inserted in it after I have called the action of jsp1.
I hope you will understand my BAD english :)
HELP ME PLEASE, it is very urgent !

Maybe it is not very clear... I am going to explain it in another way :
I have one form that I use in JSP (init.jsp) thanks to this line :
<jsp:useBean id=3D"Form" class=3D"com.form.MyForm" scope=3D"request"/>
In my struts-config.xml :
<action path=3D"/fastsearch"
     type=3D"com.action.MyAction"
     name=3D"Form"
     scope=3D"request">
     <forward name=3D"success" path=3D"success.jsp"/>
</action>
Thanks to MyAction, I populate the fields of my form. I can access to =
this fields in success.jsp.
Here the perform method of MyAction :=20
public ActionForward perform(ActionMapping mapping,
                    ActionForm form,
                         HttpServletRequest req,
                         HttpServletResponse res) {
     (MyForm)form.populate();=09
     req.setAttribute("TempForm", ((MyForm)form));
     return mapping.findForward("success");
Now, I would like that when I click on a link in success.jsp to go to =
another JSP page (last.jsp), I can access to my populated form !=20
At this moment, I have=20
<jsp:useBean id=3D"TempForm" class=3D"com.form.MyForm" =
scope=3D"request"/> at the beginning of last.jsp, but it does not =
work...
I hope you understand what I want to say ;)

Using DatePicker in forms 10g

how can i use datepicker in forms 10g for date data type items.

<p>Oracle Forms 11.1.2.0.0 Date Picker</p>

Using graph in forms 10g

Hello,
I am using FormsGraph in forms 10g.
Now I need additional options - more visualized graph and dynamic graph - like in Flash.
Is there a way to achieve that using a java bean?
Is it possible to use flash inside a form window?
Thank you,
Nina

Java Plug-in 1.6.0_14
Using JRE version 1.6.0_14-b08 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\nina_n
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Reading certificates from 141303 http://pc10-060.jer.ad.malam.com:8889/forms/java/frmall.jar | C:\Documents and Settings\nina_n\Application Data\Sun\Java\Deployment\cache\6.0\25\373de359-57e5f745.idx
load: class oracle.forms.webutil.common.RegisterWebUtil not found.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Reading certificates from 141303 http://pc10-060.jer.ad.malam.com:8889/forms/java/frmall.jar | C:\Documents and Settings\nina_n\Application Data\Sun\Java\Deployment\cache\6.0\25\373de359-57e5f745.idx
גרסת Forms Applet היא : 10.1.2.3
Reading certificates from 1990 http://pc10-060.jer.ad.malam.com:8889/forms/java/eHTMLBrowser.jar | C:\Documents and Settings\nina_n\Application Data\Sun\Java\Deployment\cache\6.0\9\603b1b09-2844393f.idx
Reading certificates from 6718 http://pc10-060.jer.ad.malam.com:8889/forms/java/jdic.jar | C:\Documents and Settings\nina_n\Application Data\Sun\Java\Deployment\cache\6.0\51\2a47f033-52581ebc.idx
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
     at org.jdesktop.jdic.init.JdicManager.initShareNative(Unknown Source)
     at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
     at oracle.forms.fd.EnhancedHTMLBrowser.<init>(EnhancedHTMLBrowser.java:56)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
     at java.io.WinNTFileSystem.canonicalize0(Native Method)
     at java.io.Win32FileSystem.canonicalize(Unknown Source)
     at java.io.File.getCanonicalPath(Unknown Source)
     ... 23 more
------> ExtendedFrame title : Enhanced Web Browser
Set Border=false
Reading certificates from 141303 http://pc10-060.jer.ad.malam.com:8889/forms/java/frmall.jar | C:\Documents and Settings\nina_n\Application Data\Sun\Java\Deployment\cache\6.0\25\373de359-57e5f745.idx

Using sequence in forms

Similar Messages

Maybe you are looking for