Using SES URLs

There seems to be a difference in configuration that I can't
find between version 7 and 8.
For example, on the version 7 server, a URL like this:
http://www.server.com/karaoke-brand.cfm/Brand/251-karaoke.html
works exactly like this:
http://www.server.com/karaoke-brand.cfm/Brand/251
The problem is on version 8, I can try the above URL (without
the -karaoke.html) and it works just fine, but adding the
"-karaoke.html" throws a 404 error. I've looked through the web.xml
file to compare differences between version 7 and 8, but I don't
see anything in there that would cause this behavior.
The reason for "-karaoke.html" to stay included is because
when the site was developed, this is the behavior that was used.
Making 1 global change needs to happen.

I am using CF8 server with different kind of SES URLs without
any issue.
I think there must be something which is not related with the
server version.
If you can clarify your issue with the SES technique etc.
that would be nice to resolve also your issue.

Similar Messages

Webi report using openDocument URL,the window does not close..

Hello,
While viewing a Web intelligence report using openDocument URL, the window does not close after clicking on Document -> Close option, and the report remains open.
And if I close the browser, the session of the user in InfoVierw remains opened
Thanks
Environment
Firefox/3.6.15
Internet Explorer 8
BusinessObjects Enterprise XI 3.1
SAP Integratio KIT XI 3.1
SAP BW 7.02

Please check SAP note 1512960 and SAP note 1384496.
http://service.sap.com/notes
This behaviour is by design.
Regards,
Stratos

How to use one URL for several Oracle AS?

Hi folks,
how do I use one URL to access several application servers (i.e. for different applications).
Example:
We have one URL:
www.test.com
In our DMZ, wie have three application servers and one web cache:
test1.intranet.com:7777
test2.intranet.com:7777
test3.intranet.com:7777
webcache.intranet.com:8000
One application server is no problem. In Web Cache, i just map site www.test.com:443 to AS test1.intranet.com:7777.
But what is the correct setting, to access all three Oracle AS over one URL? I tried URL PATH Prefix. Then i am able to access all three Oracle AS, but the application server does not know the Path.
Example for mapping:
www.test.com:443/server2 -> test2.intranet.com:7777
When I access www.test.com:443/server2, I get redirected to the correct AS (test2.intranet.com:7777), but the Oracle AS does not know the path /server2.
How do I have to configure the Oracle AS?
Thanks in advance and best regards.

I setted up a proxy and at first glance,
it works fine. The problem are internal links. Some links redirect to the
machine name, which is of course not accessible from outside our dmz.
My httpd.conf entries:
ProxyPass /test1infra/ http://test1.intranet.com:7777/
ProxyPassReverse /test1infra/ http://test1.intranet.com:7777/
ProxyPass /test1mid/ http://test1.intranet.com:7778/
ProxyPassReverse /test1mid/ http://test1.intranet.com:7778/
When I now access (for example) www.test.com/test1infra/pls/orasso I get
redirected to www.test.com/pls/orasso, which is another Oracle AS!
How can I prevent my OracleAS doing this? It has to "know" that all its internal urls need a url path prefix.

Using Go URL to Pass parameter between dashboard

Hi All,
I am trying to pass parameter using GO URL functionality from one dashboard analysis field to another dashboard.
The navigation is working properly but the parameter is not getting passed, I am not sure why.
The Called dashboard has a analysis which has IS PROMPTED filter attached to it for the passing filter. I tried various ways to make this work
Option 1
In the calling analysis, I am using a Narrative View and inside I have used the below code.
<a href="saw.dll?Go&Path=/shared/MI/_portal/Client-MI&Page=Supplier%20Detail%20Tab&Action=Navigate&P0=1&P1=eq&P2=Dim%20Supplier.Supplier%20Name%20Current&P3=1+%22STR%20LTD%22"> @2[br/]
This one navigate but filtering is not happening
Option 2 (My first preference will be this option)
Also I tried to provide custom Data Format under the column Properties
[html]""@"
This ends up giving error
Type mismatch of catalog object /shared/MI/_portal/Client-MI/Supplier Detail Tab -- expected , got .
Error Details
Error Codes: UVWDR6UA
Also, both the tabs (Called and Calling are under the same Dashboard)
Can anyone please let me know, were I am making mistake. I tried refereeing Oracle documentation but still no result.
Thanks

Looks like you've got it almost right - just an extra unneeded "
<a href="two.jsp"?ant=<%= ant %>"><%=antName%></a>
which should render on the page as something like
My Ant Task
When you click the link, it should pass that parameter, and you can get it via request.getParameter().

How to set a value to a Presentation Variable using GO URL?

Hi All,
     I am working on a drill (GO URL) from Dashboard page1 to Dashboard page2.
     The problem I am facing is, I am not able to pass a value to the presentation variable through GO URL. (I have to pass "Customer Category" static
value to The presentation variable present in Dashboard Page2 ).
     The Dashboard page2 is having a view select in which we are using presentation variable to select the report based on the value selected in
View Select.
     For example: If the user selects "Customer Category" value in View select and clicks on GO button Customer Category report will show the out put.
     When i am drilling from Dashboard Page1 I have to pass a value to the presentation variable used in view select and also pass some filter condition in
     GO URL.
     Please let me know if it is feasible to pass a value to the presentation variable through GO URL in OBIEE 10.1.3.4.
     It will be greate if you can provide me with the syntax to set a value to the presentation variable of dashboard page2 through GO URL.
Thanks and Regards,
Sagar Vishwanathwar.

1) You have to navigate to dashboard page, not to answer request = you have to use "Dashboard URL API" not GO URL API.
2) On the target page, you have to place dashboard prompt, which sets required presentation variable.
3) Refer to the target using Dashboard URL API and set filter on prompt column using URL parameters. Example: http://localhost:9704/analytics/saw.dll?Dashboard&PortalPath=%2Fusers%2Fadministrator%2F_portal&Page=page%201&Action=Navigate&P0=1&P1=eq&P2=D_TIME.YEAR_CODE&P3=%221996%22
Do not forget to use Action=Navigate. The syntax for setting filters using url parameter is the same as for GO URL API described in Business Intelligence Presentation Services Administration Guide.
This is the way, you can implement navigation to parametrized direct SQL reports including passing filter values...
Regards K.

Why do we use open URL in default browser function? What are the uses of it?

Why do we use "open URL in default browser" function? What are the uses of it?

kdm7 wrote:
Okay.
So can we keep a web button to access the www.ni.com ? So that web site opens only when button pressed?
P.S I,m a newbie.
Yes, you can also, e.g. include a help file or manual as html and open that in the browser.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to use GO URL?

Hi All,
I have two Reports-
Report1 - Dim A (A1,A2,A3) , Fact A (B1,B2,B3)
Report2 - Dim C (C1,C2,C3) , Fact C (D1,D2,D3)
Where A1,A2.. ,B1,B2.. ,C1,C2..,D1,D2.. are the attributes of dimensions and facts.
While drilling from attribute B1 in report1, i want to pass parameter A1 to report2 and want to see only the records in report 2
for which C1 = A1. The attributes A1 and C1 are having the same values.
For Drilling from measure B1 , i can use GO URL. But in the report2 "Dim A.A1" is not present.In Report2 , i have "Dim C.C1".
For GO URL, the parameter that is passed from one report should be present in second report.
Thus , how can i implement this scenario? My target report has different attribute.
Thanks, Ashish

Hi Goran,
I have the same requirement and implementing what you said
As you said,I have given HTML for the dataformat and in the column fx i gave the following.
case when project.SOURCE = 'BETA' then '' ||Sample.org_code || '' else Sampleorg_code end
case when project.SOURCE = 'BETA' then '' ||Sample."PWA#_L" || '' else Sample."PWA#_L" end
The first navigation is working fine,its giving me the data only for the selected org code(Org Code is numeric).But, the second navigation is giving all the results in the target report irrespective of the selected PWA#_L.PWA#_L is Alpha numeric
Please let me know where i am going wrong.
Thanks in Advance.

[CS3 JS SDK] Possible to Use HTTP URLs for Links?

I am attempting to use JavaScript to implement a connector from CS3 (InDesign/InCopy in my case) to our content management system. Our CMS provides an HTTP-based API. By using the HttpConnection object (from the Bridge code, see posts on "httpwebaccess library") I can access our repository using HTTP URLs and, for example, get an InDesign document or INX file (and the UI support in CS3 scripting makes it possible for me to build all the UI components I need without having to write a true plugin).
However, what I *can't* seem to do is create Link objects that use a URL, rather than a File, to access resources.
My goal is to be able to store in our repository InDesign documents that use URLs to other resources in the repository for links (e.g., to graphics and InCopy articles).
However, as far as I can tell from the scripting documentation and my own experiments, the URL property on Link is read-only in JavaScript (even though the scripting API HTML indicates it's a read/write property) and Link instances can only be constructed using File objects.
My question: have I missed some trick in the scripting API (or elsewhere) that would allow me to create links that use URLs instead of files (and having done so would InDesign resolve those URLs?)? Our repository does support WebDAV, so that might be an option, but it would depend on mounting WebDAV services in consistent places on client machines, which is dicey at best, given the weak nature of the WebDAV clients on both Windows and OS X).
Or are my only options to either copy linked resources to the client's local file system (or a shared network drive) or implement a plugin that implements my desired behavior for links?
And if the answer is a plugin, will that even work?
This is in the context of CS3. Has the Link mechanism changed at all in CS4 such that I could do what I want in CS4 where I cannot in CS3?
Thanks,
Eliot

Hi,
It is not possible to use HTTP URLS in CS3. You will have to create a plug-in to use Custom Data Links.
I think it is possible to use HTTP URLs in CS4 as per the User Guide.
Regards,
Anderson

Problem in Using an URL in Exit Plug (NW 2004s SP12)

Hi,
I have a Webdynpro application to specify the terms and conditions for the users when they login to the portal for the first time.
Upon Accepting the terms by the user, i used to loggoff the user and will redirect to the portal logon page again to relogin. (This was a requirment )
I was using an exit plug with the URL pointing to loggoff.jsp which invalidates the session and redirect to the portal login page again. This was working fine in NW 2004.
The code used to call the exit plug in the Window Interface view is,
wdThis.wdGetTermsandConditionsWindowInterfaceViewController().wdFirePlugToPortal("/globalportal/web/logoff.jsp");
When we upgarded into 2004s SP12 i am getting the folllowing error when firing the exit plug with the URL.
"The Exit Plug can not use an URL when used in Portal, use Portal Navigation instead"
We tried portal navigation as well, but seems that will work with PCD Objects only, where we need to redirect to the URL(logoff.jsp).
I tried the HttpServletResponse.sendRedirect() as well, but the control remains in the TermsandConditions view only.
Code Used:
WebCallback webcallback = new WebCallback();
HttpServletResponse response= webcallback.getResponse();
response.sendRedirect(URL);
Please let me know if somebody faced this issue and the work around for this.
My requirement is that upon clicking on the Accept button, i need to logoff the user by calling logoff.jsp will be destroy
the session and redirect to portal login page.
Please let me know the work around to call the URL in the view.
Appreciate your reply.
Thanks and Regards,
Sekar

Hi
Try
WDClientUser.forceLogoffClientUser(null);
url - the URL of the page that is shown to the user after logoff was done. If the parameter is null, the redirect is done to the "LogoffURL" URL that can be specified in the application properties. If this URL is also not defined, a redirect to a Web Dynpro internal logoff page is done.
So you may either accept default logoff-page (just text "Web Dynpro application terminated. Good bye!" or provide your own page via application properties).
Next, it is impossible to just log-off to auth screen. It is necessary to set as log-off URL some application that requires authentication also.
This way WD will first log-off user, then shows auth-screen and then login him again to the target application.
So try the following:
In NW IDE open your application properties, and add standard property "log-off URL", for example "/useradmin/userAdminServlet?userProfileView";
Regards
Ayyapparaj

How to download video files using http urls through OSB

Hi all,
I am working on a requirement where I need to download the video using http url of that video through OSB. Is it possible to convert the video files hosted in a server into base64 code using OSB ? Kindly help me on this.
Thanks
Edited by: 887737 on Jul 25, 2012 3:26 AM

Hi,
I believe you can get the video file using file transport and then convert it into base64 using a java call out...
This may help...
https://blogs.oracle.com/ateamsoab2b/entry/an_example_of_how_to
Cheers,
Vlad

How to emabed BI Publisher report to a different application using GO URL

Hi all,
How to emabed BI Publisher report to a different application using GO URL.
I put the BI Publisher report in dashboard and create a go url but the problem is it is showing top header and all dashboard names present in my dashboard.
I want to show only report.
If we do a GO url of answers requst it shows only report . Same way can we do for BI publisher request.
Thanks

10g or 11g?
for any you can get the link from BIP report properties. and use that link

How to use SES in my application?

Hi, everybody:
My manager plan to use SES in our application which maybe resolve our requirements. So he ask me to take a test. But now I'm in trouble.
First, our application have more than about 500 tables, and one third of them need to be searched.shall I create each table source for them?
Second, In the administrator's guide -- Web Services API -- search operations -- doOracleSearch Message , the parameter of groups, it says: Limit the search result to the documents from specified source groups. The default is for all groups if not set explicitly. So my code is following like this:
OracleSearchResult searchResult = stub.doOracleSearch(req.getParameter("searchTerm"),new Integer(1), new Integer(10), Boolean.TRUE,Boolean.TRUE,null, "en", "en", Boolean.TRUE, null, null,null);
I want get the default value, So I write null. But the result isn't all of the hits, just come from one of the table source groups. why?
Third, Global Settings -- Translate Source Group Name, I translated my source group, I checked the search result element(oracle.search.query.webservice.client.ResultElement), the group's name and display name were same with written in English, but the infoSourcePath was translated. Where was my mistake?
Fourth, I defined a private search attribute for a source from Global settings -- Search Attributes.
And in the Home -- Sources , I choose a column with this attribute. When I search this hit use doOracleSearch, I get this attribute name, display name, type ,but how can I get this column value which mapped with this attribute?
Can anyone help me?
Thanks a lot!

In answer to your first question, no - you probably don't want to create a table source for each table. Instead, try to create a view which combines as many as possible of these tables (perhaps with UNIONs) then create a "table" source on that.
Not sure of the answers to your other questions, hopefully someone else will be able to answer them.
- Roger

Accessing a single portlet using an URL in a browser window

Is there a way to access a portlet alone using a URL and render it in a browser? Am able to access a service request form similarly using its service request id in the URL. But i don't find an URL for portlet to access it separately in a browser. I need to have a link in a page, which when clicked would open up the portlet in another tab of the browser.
Is this something possible?
Thanks,
Anish

Are you using the same extensions on both computers?
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

How to pass many variables to servlet using a URL? Ajax related.

I have 100 text boxes in my JSP and want to pass the values stored in these text boxes to a servlet with out the need for submitting the entire page using AJAX frame work.
I know how to peform the above in ajax if I have only 1 textbox. But how can I do that with 100 text boxes. I don't want to build a huge URL with 100 parameters.
I am thinking may be create an array and send it to the servlet, but don't have an idea if we can do it.
Please help me .

You can make a POST request using an XMLHttpRequest, but you won't be "passing many variables using a URL", which seems to be one of your requirements, and which makes your question confounding(after all how do you pass many variables using a URL without putting many variables in the URL):
req.open("POST", url, true)
req.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded');
req.send("first=Eric&last=Kaiser");

Accessing seured website using java URL/Socket programming

Hi,
I am working on an intranet search engine using java URL and Authenticator class. This is a secured web-site using SSL in http server. I am not able to access the password protected pages. Following is the code:
URL url = new URL("https://*************");
URLConnection connection = url.openConnection();
PasswordAuthentication pa = Authenticator.requestPasswordAuthentication( InetAddress.getByName(connection.getURL().getHost()),
connection.getURL().getPort(), connection.getURL().getProtocol(), null, "Basic");
StringBuffer buf = new StringBuffer("*****************");
buf.append(":");
buf.append("************");
String encoded = new sun.misc.BASE64Encoder().encode(buf.toString().getBytes());
connection.setRequestProperty ("Authorization", "Basic" + encoded);
InputStream content = (InputStream)connection.getInputStream();
BufferedReader in = new BufferedReader (new InputStreamReader (content));
String line;
while ((line = in.readLine()) != null) {
System.out.println(line);
Let me know if there is any other alternative
tnx,
Biswajit Biswal

Below is my first test program. I first take the home page of a website (this can be automated later) and save it to "myTest.html". Then I try to see if this page contains the keywords that a company website often has.
Could you give your opinion on this approach?
If this approach is fine, then any idea about the keywords to select a company website from other sites is welcome.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.Reader;
public class MyTest {
      * @param args
      * @throws IOException
     public static void main(String[] args) throws IOException {
          InputStream in = MyTest.class.getResourceAsStream("/myTest.html");
          Reader reader = new InputStreamReader(in, "UTF-8");
          BufferedReader bufferedReader = new BufferedReader(reader);
          String line;
          while ((line = bufferedReader.readLine()) != null) {
               line=line.toLowerCase();
               if (line.contains("contact us")) {
                    System.out.println("contact us: line = "+line);
               if (line.contains("career")) {
                    System.out.println("career: line = "+line);
               if (line.contains("company")) {
                    System.out.println("company: line = "+line);
               if (line.contains("about us")) {
                    System.out.println("about us: line = "+line);
               if (line.contains("product")) {
                    System.out.println("product: line = "+line);
          bufferedReader.close();
          reader.close();
}

Using SES URLs

Similar Messages

Maybe you are looking for