Using several UMTS access points (APN) for different services

Hello,
I wonder if it is possible to use several UMTS access points (APN) for different services.
situation:
1) The iPhone is used for business AND private purposes.
2) The company's mobile telephone contract includes a APN, which is only usable by the employees' mobile phones.
problem / question:
Is it possible to define two access points in the iPhone, that for example the exchange account uses the company's APN, while all the other apps use the standard APN of the carrier?
Problem is, that some iPhone's benefits like Push-Messages are blocked by the carrier's APN. Now, I have to switch the access point by installing the appropriate profile every time I want to check my e-mails or vice versa for using "normal" apps.
I hope you can hep me.
Greets from Germany
Mitch

Thanks for your help! This really helps a lot! We actually only want to replace the autonmous access point with the controller solution and make one WLAN available at another site. From what I can see, this is possible with our current solution - we just need to switch from Layer 2 to Layer 3 and purchase the corresponding amount of supported Access Points (I think we should be able to get some refurbished ones).
Am I correct in assuming that the Access Points we want to replace (AIR-AP1230B-E-K9 with 802.11b radio only) cannot be upgraded to lightweight ones? Since if I understood document http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html correctly, this is not possible with access points that only have 802.11b radios.
Regarding the switch from Layer 2 to Layer 3: Do we really only need to perform the steps I described in my first post?
And one last question regarding REAP. As far as I understood this is only needed when local traffic needs to be maintained in case the connection to the WLC becomes unavailable. So we really don't need it if we want to access resources that are only available over the WLC?
Thanks again for your help!
Michael

Similar Messages

Error Using the SQL Server 2000 Driver for JDBC Service Pack 3

Hi,
I�m using the SQL Server 2000 Driver for JDBC Service Pack 3. The connection is succesfully, but when I use de statement.executequery() method, there is the follow exception:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'PEC_COUNTRY'.
This is my code:
ResultSet resultSet;
Statement statement;
Connection connection;
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://S0MALMUERTA:1433;user=sa;password=");
statement = connection.createStatement();
resultSet = statement.executeQuery("SELECT COY_INX, COY_NAME, COY_ICO FROM PEC_COUNTRY
");When I make the last instruction, occurs the above exception
Thanks in advance
Luija

The way you are connecting, the default database used will be 'master' and i guess that the table PEC_COUNTRY was defined in another database.
If it is the case you need to specify the database name.
connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://S0MALMUERTA:1433;DatabaseName=yourdb;user=sa;password=");

Kin1m- Can't pull DHCP from any Access Point on 2 different phones

I am hoping someone can help us.
I have two kin1m phones, and have recently attempted to use the WIFI connectivity. Browsing works fine via the data plan, however, I blocked the data plan (online), intending to only use WIFI on the phones but cannot get either of the two phones to work via WiFi.
Have have tried two different access points, and everything from OPEN to WEP to WPA2 and both AES and TKIP.
I get connected to the access point just fine, but the only address that is allocated is the DNS server. The IP, subnet, gateway, etc. remain blank or all zeros for about 5 minutes, then it sets a default apipa address in the 169.254.x.x class B range.
This is the same on both phones, so I have a tough time believing this is a defect. Like I said, I have tried both a Linksys WAP4400N (Firmware Version: 1.2.14) and a TrendNet TEW-430APB
Please advise, as my kids are going to DRIVE ME CRAZY over this!
Thanks,
Mr. Kidwhipped

paulbarbee wrote:I tried manually running ¨/etc/rc.d/dhcp4 start¨ but that ...
... But that is a dhcp server, not a client. In other words, you are trying to tell your computer to provide other computers on that public network with IP addresses. Because you did not set your configuration file up to serve that subnet, the server choose to ignore it. This is fortunate, because the owner of that network might not have appreciated that
You want to run dhcpcd, which is a client. You might also try dhclient, a client that sometimes is more forgiving.

Using the WAP300N access point in combination with a WES610N Media Bridge

Here is the situation:
I live on a small farm and have an office separate from my main house. My current router is a EA4500 and it is located in the office which is approximately 45 feet from the main house. Current wireless signal strength at the interior wall closest to the office is nominally -55 to -50 dBm but drops off dramatically on the other side of the house. I currently have a WES610N media bridge on the far side of the house that is supporting a DVR and TV. The WES610N is receiving signal from the router but it is weak. Wireless network site survey indicates only 4-6% reception whcih I'm assuming is somewhere around -80 dBm based on measurments I made using a WiFi analyzer app on my tablet.
I had an RE1000 that bit the dust. What I'd like to do is increase the wireless signal strength in the main house without running a wired connection from the office. I'm considering purchasing a WAP300N Access Point which will also function as an range externder. However, I am curious if there is any merit/efficeincy in also buying an additional WES610N Media Bridge an then connecting the WAP300N to the additional WES610N bridge and to allow the WAP300 N to serve as an acutual access point.
Any thoughts on whether that would gain anything or would I be better suited by simply using the WAP300N as an extender??

Your planned bridge - wap combo is better than using a range extender. Using an extender would expand the signal but it would cut the bandwidth into half. So, using the bridge-wap combo, it would expand the range without loosing bandwidth quality. It should be the same setup with an extender from where you'll place the combo at the edge of the wireless signal from your main network. But same rules about wireless signal and connectivity, it is prone to wireless interference.
If your house is running on same circuit line, you can also consider using a powerline adapter. For information about powerline adapter, you can check this Article. It would eliminate deadspots better compared to the previous setup above. But this is just another option that you could take a look at.
Hope this helps.
If everyone needs to believe in something, I believe I'll have another beer..

Use N95 as access point and get laptop inet throug...

Is it possible to use the N95 as an (WIFI) access point and use a laptop, a psp, an ipod touch to access the internet through 3G or even Turbo 3G?
That would be really really cool!
Regards
Raptor

I dont think it is as would have to be connected through a router to a phone line anyway. My psp doesn't even detect my N95. You would have to use it as a bluetooth modem and 3g.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

Nokia E6 - Where is the Access point setting for Y...

I have my Nokia E6 configured for my Corporate Email, MfE and it works fine. In the settings for MfE, I see a setting for Access Point, where I choose Internet with Priority 1 as my Home WLAN and Priority 2 as my GPRS connection.
Then, I started to configure my private Yahoo mail, evertyhing is done, it works fine, but I do not see any settings for Access Point for the Yahoo mail..
Does this mean it picks up the settings from MfE???
Can any other NOkia E6 users or experts comment on this??

Hi Stuart,
To answer your question:
There is no shared secret for the ACS itself.
If the ACS is going to communicate with another device, you have to define a AAA client and define a shared secret.
ACS 4, used that shared secret to protect/secure the replication, in ACS 5, the replication secured with encryption and not shared secrets(hash).
Rate if useful

Can WRT300N be used as an access point?

My current network uses another company's wireless access point , but I'd like to go to an "N" speed on wireless. A store near me has the WRT300N Wireless-N broadband router on sale. Can I use it as an access point for my wireless computers or do I need something more specific like the WAP4400N access point.
thanks,
Chris

yes..you can certainly use the wrt300n as a wireless AP .. no problem

Wireless access point advice for SMB (5 users)

I have a small site, 12 employees, five of whom will need wireless access to the LAN.
This site has an 877 (not 877W) and so I need a wireless access point.
I've been looking at the Cisco Aironet 1130AG. Can anyone make a recommendation, something that will be the same or similar to configure as wireless services on the 800 series wireless routers.
There is no domain or radius server, so any user authentication will need to be handled by the AP.
Any useful information would be much appreciated.
Thanks
Gareth

You're on the right track. The 1131AG is a great platform for small offices. It has built in antennas and is not offensive looking when mounted to the ceiling. Running a single 1131AG would allow you to run RADIUS locally on the AP so you could still use EAP security types such as EAP-FAST with WPA2.
Once you go to deploy, there are plenty of us here on the forum that can help if you run into config gotchas.
Of course I'll include the standard disclaimer that your coverage might vary based on the building construction, so you could need multiple APs to cover enough area. If certain coverage is absolutely mandatory, you should consider a site-survey beforehand.
-Eric

E4200 v2 - Using as an access point, will USB storage still work?

If I were to take a e4200v2 and use it as an access point (disable DHCP), would the USB port connected to a Hard Drive still function as network storage?

Yes, it will. The only thing you need to do is make sure you still have a Static IP address on the E4200v2.
Main Router ------> (Ethernet Port) E4200v2

Using more than one Solution Manager for different usages

Dear all,
we are using a solution manager system with >100 connected systems.
The system should primarily be used as service desk system, but is also used for BC issues (e.g. MOPZ,...) at the moment.
We have to implement a central monitoring system (CEN) using the CCMS infrastructure.
It is recommended to use a seperate system for this issue, because of high performance requirement and the requirement to have the newest support packages for CEN+MOPZ.
Because of that recommendation we are thinking about installation of a second solution manager system which should handle all BC and Monitoring (CEN+SolutionManager-Monitoring) issues.
Do you have any experience with such a landscape? Are there known problems respectively is such a landscape possible/workable? How should the systems be connected? ( client system<=>solman / solman<=>solman )
I regret that I could not find any official landscape recommendations from SAP for big landscapes (VAR environment)?
If you know any applicable documents, please let me know.
Thank you for your help.
Best regards,
Sascha

Hi Sascha
Technically Solution Manager is being billed as the Central system for everything Service Desk, MOPZ and CCMS - one central location for all scenarios
One of the reasons for this is lifecycle management -- monitoring or EWA scenario finds a problem, service desk raises the issue, charm or mopz implements the solution and it is tested and distributed and the whole lifecycle is documented one system. Indeed I am aware of no functionality to integrate scenarios between Solution Manager systems - each Solution Manager system in your proposal will be standalone for each scenario
I can't provide guarantees because SAP recommend 1 Solman PRD only, but it might be possible to use another PRD Solution Manager system (or client) for scenarios that not already setup in the existing Solution Manager system - this certainly is the most possible way to have 2 PRD Solution Manager systems (or clients) running in parallel.
The key thing to be aware of is RFC conflicts - as each scenario usually has its own RFC this might be avoided - however
do watch out for situations where scenarios share RFCs or you if find RFCs existing with the same name OR client and SID in any systems in the following landscape
Landscape 1 - Satellite System 1 to Solman System 1 Service Desk, MOPZ
Landscape 2 - Satellite System 1 to Solman System 2 CCMS, EWA
Best wishes
Stuart

Infrastructure access point unreachable for management, but is passing traffic.

We have 2 aironet 1310 aps setup as infrastructure access points between 2 buildings. One went south on us & we placed it. Before the bad one went down, we were able to manage both remotely & could see them from the next device via CDP. Now, we can't connect or even ping either AP. And the weird part is that the switches that connected to each can see each other via CDP, but not the access points between them. I'm attaching the configuration. Before I make the 2.5 hour drive back to the site, does anyone have an idea on what I may have misconfigured on either or both access points?

Hello Ronald,
Please mark the Question as Answered, if the provided information by George is correct and it helped. By doing that others can take benefit as well.
Thanks,
Vinay Sharma
Community Manager – Wireless

Using a single HeaderHandler of JaxWS for multiple services

Hi,
In our application,we are using 3 different services.The authentication credentials are different for each one of them.So,we have created 3 different Headerhandlers for each one of them.
I wish to know if it is possible to have a single HeaderHandler for all 3 services.Please let me know if we can set the username/password in Headerhandler at runtime.
I am not able to pass the parameters in handleMessage(SOAPMessageContext smc).
Please suggest.

Hi Phillip,
both scenarios will work. One CSS can certainly manage more than 3 services! You can even use just one VIP for all traffic, then just create the proper rules to send specific traffic to the corresponding service(s). No need for 3 VIPs.
Regards
-juerg

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

Using IBM Tivoli Access Manager to Secure Tuxedo Services

Wondering if anybody has any experience using 'IBM Tivoli Access Manager for e-business' to perform tuxedo service authorization ?
Is there an out-of-the-box integrated solution available or does one have to basically build a security service that use the Tivoli Access Manager APIs to determine if the user is authorized to invoke service?
Thanks,

Hi,
I followed the steps of establishing SSO using TAM for OBIEE application.
Below is the piece of code that i had inserted in the "instanceconfig.xml" to enable SSO:
<Listener>

</Listener>
<CredentialStore>
<CredentialStorage type="file" path="<OracleBIData>/web/config/credentialstore.xml" passphrase="another"/> </CredentialStore>

<Auth>
<SSO enabled="true">
<ParamList>

<Param name="IMPERSONATE"
source="httpHeader" nameInSource="iv-user"/>
</ParamList> 
<LogonUrl>http://pkmslogin</LogonUrl>
<LogoffUrl>http://pkmslogout</LogoffUrl>
</SSO>
</Auth>
My credential store file look Like on below
<sawcs:credential type="usernamePassword" alias="impersonation">
<sawcs:username>USER</sawcs:username>
<sawcs:password>password</sawcs:password>
</sawcs:credential>
In the above code i am trying to get the userID of a User through the header of the application's URL, who has been already been authenticated by Windows desktop Authentication mechanism .
but then i try creating a junction using TAM and access the application through the junction i still get the logon page of OBIEE application...
Can any one help me out in this issue..
Thanks in Advance...

Valuation class for different services

Hello Experts,
In one of the business requirements, they have around 40-50 different services and each service has to be accounted under different GL codes.
In such cases, when we create service masters, can we have the standard val class 3200 (For services) or do we need to create multiple val. classes. If yes, how many needs to be created for those 40-50 different services .
Regards
Mahesh

Hi,
Just keep one val class 3200 (For services) & create different material groups(40-50)in OMSF t.code to cater your different services(40-50 ) & assign G/Lu2019 with respective material group in t.code OMQW
For more check the links:
Re: material group with vluation class
Re: Material group link with GL account
Regards,
Biju K

Using several UMTS access points (APN) for different services

Similar Messages

Maybe you are looking for