Using Simpleviewer Pro for Web galleries creation

For once, I don't have a problem, I just want to share a wonderful experience with Simpleviewer Pro. Simpleviewer (the free version) comes with LR and is pretty fast and easy to figure out. However, I went and bought the Pro version for $35 and found it much more powerful and faster. It does everything I wanted from a Gallery generation application. I installed it on my desktop but when I tried the same installation on the Laptop, it crashed and told me it cannot install. After emailing techsupport I got an answer virtually in hours. It gave me specific steps to try to resolve the problem and asked to be kept posted on developments. I tried a second time, unsuccessful again and emailed svBuilder-PRO with copies of the error messages I was getting. They got back to me right away : the problem was actually a WINDOWS problem, where an old version of Adobe AIR could not be unistalled to put the new one (Simpleviewer pro uses Adobe AIR). My email had a link to a Microsoft support site which had a Microsoft FIXIT executable. I downloaded and ran the FIXIT, it fixed the problem and svBuilder - Pro installed correctly.
In two words, this software is fast, powerful and elegant, it gives me everything I need for WEB Galleries creation and I would highly recommend it to anybody trying to do (or help doing) a WEB site.

Here's the appropriate language relating to this
d) Soundtrack Pro. You may use the Apple and third party audio file content (including, but not limited to, the built-in sound files, samples and impulse responses) (collectively the “Audio Content”), contained in or otherwise included with the Apple Software, on a royalty-free basis, to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual audio files may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files or music beds.
It mentions that you can distribute your audio projects, so that might seem to indicate that the answer is yes. The language is clearer in regard to synchronized music to picture, or audio for broadcast or other distribution.
+Personally I see a gray (grey) area here . . . what about if I took a piece of stock music from the audio content and wrote lyrics to it and called it a song. Can I claim sole authorship of that . . . the agreement seems to indicate yes, but that doesn't scan to me.+
Anyway, i think if you're talking about writing a song using loop content, I'm pretty sure the answer is yes you can sell the resulting creation. _But I'm no lawyer_. It's probably open to debate.

Similar Messages

  • Hi. I am trying to use Bridge to make web galleries. There used to be something on PS for that but now I cant find it in PS so I was advised to use Bridge.  However, there is something called Output Module (AOM) that is missing from my Bridge.  I download

    Hi. I am trying to use Bridge to make web galleries. There used to be something on PS for that but now I cant find it in PS so I was advised to use Bridge.  However, there is something called Output Module (AOM) that is missing from my Bridge.  I downloaded this.  The instructions say :Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location: 
    Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
    Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions.  However there is noplace on my Macbook Air running Yosemetie that has this /Library/Applications SUpport/Bridge CC Extensions. Can anyone advise?

    That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

  • Help me using tools Save for Web?

    I want to use tool Save for Web to compress image and upload to website KingShop.vn but unknow? Help me use it, pls.

    Save for Web will create a JPG that has some things stripped out to make is smaller than a regular Save might produce, but PS doesn't upload to a website.  That is something you'll have to determine from other sources, perhaps the website owner.

  • Using CS6 for web mockup creation? Tips on how-to's

    Hi
    Pretty new to Photoshop and running CS6.
    I'm looking for a workflow to create web mock-ups in the most efficient and easy way.
    What Im looking for is to take an existing web frontend page and tweek it with new sections and components like buttons/menus/new text areas,images etc etc....
    are there any specific tools or "web galleries" to use for this purpose that I can incorporate into CS6....not really sure how to form this question in the right way but I hope this sort of exaplined my purpose....creation of good-looking web page design (even if it will jsut be in .psd format)
    Any help, tips & tricks would be appreciated.
    Thanks!
    //Helmut

    A web gallery is many web pages you need more then a layered template psd. Templates are more suited for Collages rather then web Galleries.  In the bridge output module there are some caned web galleries provided by Adobe there just not very good or a not easy to customize.
    There are many web gallery creation tools available on the web some free other cost. If you do a search you will find many. Some use Photoshop in the process they are Photoshop Scripts. Most have some options to customize some features. None that I know of give you complete freedom to create whatever you want. They support their web gallery designs where you can customize features within the designs.

  • How to use chart engine for web dynpro java(EP) for Graphics generation.

    Hi Frndz..
    now lookiing out for different types of dynamic graphics generations according to my requirment, n i saw the followiing blog
    Testing BusinessGraphics in Web Dynpro for Java
    Itz very nice to see that we can generate planty of types, but here our server is EP 7.0(not CE 7.1) and i gone thru  these links also
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/86/243f403f0a9354e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/0b/79553b066d9414e10000000a114084/frameset.htm
    https://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/frameset.htm
    here it seems to be Chart Engine n Chart Designer is mainly for BSP(R3), how best we can use this for web dyn pro java.
    Thanks in Advance
    Regards
    Rajesh

    hi
    if you want to use BusinessGraphics in WebDynpro java you have to configure IGS.
    IGS Configuration
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4846ac90-0201-0010-099d-d3b4e271849c
    Business Graphics docs.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3261cd90-0201-0010-268c-d8d72e358af6
    ChartDeigner Usage
    http://help.sap.com/saphelp_nw04/helpdata/en/18/d4d43fb9490c65e10000000a114b1d/frameset.htm
    Generating Gantt chart using web dynpro business graphics

  • Ampersand in Title/Caption for Web Galleries

    You probably all know this already, but I didn't...
    I've been getting to grips with the
    Sean's tip for formatting captions in web galleries, including
    Matthew's Slimbox gallery. As you'll see in the thread linked above, I had some trouble initially using it with Slimbox, but I thought I'd got to grips with it until...
    A title for one of my pictures was "Beer & Blues". By that I mean the Title field in the Library module, as distinct from the Title field in the Web Module.
    In Flash galleries it works just fine.
    In the LR HTML (and Slimbox) galleries using an & in the image title metadata field can cause a variety of symptoms including:
    - just displaying a blank background and never getting round to rendering the gallery when Web module is selected
    - replacing "Custom Settings" next to the Title/Caption radio buttons in the Web module with "Edit...", consuming 100% CPU, displaying the rainbow spinning beach ball of death, and taking several minutes to return
    - apparently working but obstinately refusing to acknowledge any edits made
    There appears to be some interaction between this behaviour and using the <ag:formatted> technique, but I'm struggling to pin it down.
    All of these symptoms disappear by using either "and" or "&amp;" in place of "&".
    LR 1.2 on OSX 10.4.10
    Damian

    Sean,
    I'm sure you're right and that's what's happening. I have no excuse for not realising although I did track it down by a process of elimination.
    Anyway I know
    i now!
    Damian

  • "Tell a friend" email for web galleries- black on black for PC users

    Whenever I send out an email to friends with info for a web gallery, everyone who uses a PC (most everyone I know) gets the email and the text is black on a black background and they can't read it. I have to add text to the email with the username and password. When I cc myself on the email and get it on my Mac, it's white text on black background.
    What's going on here? It's been this way for 4 web galleries so far.

    Dave:
    Try using the Tell a Friend option in iPhoto's toolbar instead of the option of the online gallery. It will look like this except I've changed the font and color of the lower URL line which you can do with this method.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • MacBook Pro for Web Develop/Photographer

    I'm a student and I am travel photographer and web developer.I'm looking at buying a 13" Macbook Pro w/o Retina, however, I'm having trouble figuring out what configuration I need. Unfortunately, I know more about the web than I do about the inner workings of a computer. So I would love some suggestions on what to get for the processor and RAM storage.
    The MacBook is going to act as my travel work laptop and it will go with me everywhere, cross country and overseas. It will be a place to offload my photos to Lightroom and do basic checking and editing. Video editing is going to occur very often. I'm also going to be using it as one of the main place for coding and designing websites
    I would be running the following programs on it:
    Adobe Lightroom
    Adobe Fireworks(Or a similar program)
    Adobe Photoshop (Or a similar program)
    Adobe Premiere Pro (Or a similar program)
    MAMP
    Itunes
    Multiple Browser
    Text Editor
    It would also be nice to have the option to add space if I would need to.
    So what is the best set up for what I need? Should I get an I5 or I7 processor? What amount of memory should I get? What type of hard drive would be the best?
    And is there anything else you suggest for me to get?
    Also, would refurbished be a good option?
    And don't just say get this. Please give me a reason as to why.
    Thanks so much.

    I'd be curious to know what "issues" you think there are with the Retina MBPs. But at any rate, if you want the non-retina model I'd suggest you upgrade it to 8GB of RAM (more RAM is always better) and at least the 256 GB SSD. I also agree with Andy on using external HDDs for additional storage.
    I am in a similar situation as you. I will be buying a new MBP later this year to replace my early-2011 15" MBP. I'm going to with the top model of 13" MBPr and will have additional external HDDs for backup and file storage. I don't do web development but I am an amateur photographer.
    I can't stress this enough: do not forget the external HDDs for backups. Having current Time Machine backups will be critical in case of an emergency. Having an SSD in the MBP will dramatically reduce the possiblity of losing data but having backups is still important.

  • How do you use your pictures for web, iPad & smartphones? All the same size??

    i realy think back and froth about this question.
    i guess it makes sense - to use all the same size -  because newest Ipads and Iphones are with retina-screens !??
    on the other hand i use background-pictures for the website with a lenght of 1800px (it's 400 kbit) so it may slow down my the mobile version
    but i know , people always scroll and zoom into evrything with an Ipad and  smartphone ... So what to do?  What is your hint ?
    Thank you for your time ;-))
    Nachricht geändert durch Ideenautomat

    For me anyways, I 'always' create my images to the size I need and then bring them into what ever web design tool I am using wether it is Muse, Dreamweaver, Coda or a number of others. It takes a few minutes longer but I always get the results I need and expect.

  • How can I use bridge to create web galleries with more than 10 images?

    I am new to building web galleris for my website. When i try to load more than 10 images in a gallery , Bridge cuts off all images beyond 10. I am confident that I can do this if i can find the right settings

    I am not at my PS computer right now, but I think the Preview only shows 10 images (for speed) but they will all be there in the final output.

  • Which color profile to use, if any, for web?

    Hi,
    For years, I've been accustomed to saving JPGs for web use by including the sRGB color profile.
    However, I now realize that IE either discards color profiles, or forces a new one on them (took me this long to notice because while I always proof-check my code through IE, I never paid close attention to image colors 'til now). Meanwhile, Firefox actually uses the ones the JPGs were saved with, so I see the exact same thing in Photoshop as I do in Firefox.
    Anyway, as I was saying, I just noticed the colors are very different in IE. In fact, trying to match a hexadecimal color value with a JPG is pretty much impossible as long as both IE and FF interpret JPG colors differently.
    As a test, I tried saving a JPG with no color profile included. Interestingly, it showed up near identically in both FF and IE.
    Which begs the following question :
    Why the hell have I been using color profiles all this time? :-(
    Another observation I made is that the Adobe RGB color profile more closely resembles the No Color Profile state than sRGB does (sRGB is a lot less saturated color-wise).
    So what is it I need to do now?
    1. Go over the entire website and re-save all images with no color profiles.
    2. Go over the entire website and re-save all images with Adobe RGB color profile.
    The goal here is that I want my hexadecimal color values to match what's on the JPG (for example, when a gradient ends and goes to a flat color state, I'd like to be able to fill that region with a hexadecimal color value instead of using more images needlessly... but for this to be a seemless transition, everyone needs to agree and match).
    Thanks.

    I've been doing something completely different.
    To the extent that a color needs to match or be like a color that is a background on my website (which is the usual issue I run into with color differences), I make a .PNG or .GIF file and use transparency. That way I don't get the problems associated with color profiles and web safe colors.

  • Use of sOutputFormat for WebI reports in OpenDocument

    Can we use sOutputFormat as output parameter in Opendocument for Web intelligence reports. I tried this but, no result. FYI I am trying this in 3.1 environment.
    -Raghu

    Hello Everyone,
    I solved it!!!
    Thanks.
    Regards,
    Komik Shah

  • Captions for Web Galleries Created by Aperture 2

    I recently created a web gallery with Aperture 2 and posted it on .Mac. When looking at the Settings for for the Web Gallery (under Aperture 2), I see an option to "Show Version Name." I'd like to use the caption for each photo as opposed to using the version name. Is there a way to use the photo's caption without changing the version name? I would hate to re-type (or copy & paste) the captions into the Version Name.
    Thanks!

    Hi Chuck
    Shoot me down in flames if I am not understanding you, but here is my experience of AP2 and iWeb. Before I publish a web gallery I make sure to select all my target pictures and update the previews. Next I publish the gallery and check it's working. When I open iWeb and click on the media inspector I can see the web gallery when I navigate down through my Aperture entries. Now, this is where we may part company, but like you I cannot see any reference to the gallery in the Insert menu - but all I did was click on the gallery in the media inspector and drag it onto an iWeb page. At this point I got the option to choose a theme for the page and iWeb built it for me using my gallery.
    Is this helpful to you guys, or am I so far off the mark it's untrue
    FlatE

  • I am using quicktime pro for apple codecs and  adobe CS6 cant see them. I am using win7 64bit op sytem. Help please...

    I am using Quicktime pro 7 the latest, on a win7 64bit PC machine.
    Adobe Premiere and Encoder cant see it; has anyone had troubles and
    how do i fix this problem..help. I am try to use the apple codecs for
    digital editing "apple prores 422".

    Hi Gary
    thanks for your reply, look I was loading the latest Quicktime and paid for the latest version of Quicktime Pro for windows as well as updating Itunes. After restarting my PC, the apple codecs would not show in the codecs list when i was preparing the output specs which are for the Australian broadcast which my boss wants of:
    1280 X 720, 25fps and Apple codecs prores 422.
    Look I was wondering is there any area of Quicktime Player Pro that I have to turn on or off, I just wonder if I have to do something in Premier Pro or the other adobe program encore to convert certain levels of film from one level to another, as the camera crew I was with had 5 different levels of film to convert to the above format.
    Do you have any other ideas that come to mind, I have had some troubles in the last six months with Indesign and Adobe pdf maker, I have alot of sucess with adobe before. I gratefull for any other hints. Cheers Hound Puppy

  • Would I use Premiere Pro for making a DVD?

    I am looking to put my graphic design porfolio on a DVD.  I want to have an interactive DVD with a menu where user to pick which area of design they want to explore and my resume itself.  Then when they pick a piece...I want to have the information page to pop up first then the user have the ability to pick the piece where it will enlarge on the screen or vice versa.  It's all still pieces, no video.  Then I want to author the DVD.
    However, I am not sure which Adobe programs to use to do this DVD.  I was thinking of using Premiere Pro CS4 and Encore??  Am I correct?
    I need direction and advice!!  Thank you!
    Rachel

    Web or Internet functions on a DVD
    Macromedia Director http://www.adobe.com/products/director/ for mixed content

Maybe you are looking for