Using single version DPS for college class

Hi,
I teach media design at a four-year university and we'd like to develop an iPad app for a special topics class using the single version DPS.
We want to make sure this is workable BEFORE we spend the $400 for the app.
I've created several test folios using CS5.5 with updated folio builder and overlay creator and can only view them sporadically on the Adobe Content Viewer on my iPad (4). None of the other students (older iPads) can view them at all.
It will be necessary for at least three of us to be able to preview folios in content viewer.
Will the single version DPS provide us with a way to preview on multiple iPads? We need to do a lot of proofing and reviewing BEFORE we publish this app.
The students are REALLY excited about doing this but I need to make sure it will work before we spend the money.
We just want to create ONE single publication but again we need to make sure we can preview every article to make sure the interactivity behaves the way we intended and to copyedit.
I can't seem to get an answer for this by calling Adobe or chatting with a live rep.
Thanks so much.

In your copy of InDesign 5.5 go to the folio builder and click on the "About..." submenu item" to see what version you are running. Update if you are not using version "12.2.2.20120504." A good resource is at the top of the DPS forum -- "Can you update Adobe DPS?" That website will tell you what builder version you should be running, what tools and viewers you need.
There are discussisons on here what keeping the DPS up-to-date and the best practices to follow.
To answer your question, I don't think you need to delete and reinstall. Your iTunes and iPad should be telling you if there is an update to the content viewer.

Similar Messages

Want to use single oracle home for multiple database releases

Hi,
I have following 3 different databases.
Oracle7 Server Release 7.3.4.4.0
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit
I want to access these databases using single oracle home. Please advise which client version I have to install to access these. I tried using Oracle Release 9.2.0.1.0 client but I am not able to connect to oracle 7 by using this.I am ready to have multiple oracle homes.But what client version I have to install and where can I get it.Your help will be highly appreciated.

... and 7 is using oracle 8.1.7 client.From your sales representative. 8i is no longer available for downloading,because desupported since many years.
Werner

Is it possible to use single ssl certificate for multiple server farm with different FQDN?

Hi
We generated the CSR request for versign secure site pro certificate
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
SSL Certificate for cn=abc.com considering abc.com as our major domain. now we have servers in this domain like www.abc.com, a.abc.com , b.abc.com etc. we installed the verisign certificate and configured ACE-20 accordingly for ssl-proxy and we will use same certificate gerated for abc.com for all servers like www.abc.com , a.abc.com , b.abc.com etc. Now when we are trying to access https//www..abc.com or https://a.abc.com through mozilla , we are able to access the service but we are getting this message in certfucate status " you are connected to abc.com which is run by unknown "
And the same message when trying to access https://www.abc.com from Google Chrome.
"This is probably not the site you are looking for! You attempted to reach www.abc.com, but instead you actually reached a server identifying itself as abc.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of adgate.kfu.edu.sa. You should not proceed"
so i know as this certficate is for cn=abc.com that is why we are getting such errors/status in ssl certficate.
Now my question is
1. Is is possible to remove above errors doing some ssl configuration on ACE?
2. OR we have to go for VerisgnWildcard Secure Site Pro Certificate for CSR generated uisng cn =abc.com to be installed on ACE and will be used for all servers like www.abc.com , a.abc.com etc..
Thanks
Waliullah

If you want to use the same VIP and port number for multiple FQDNs, then you will need to get a wildcard certificate. Currently, if you enter www.abc.com in your browser, that is what the browser expects to see in the certificate. And right now it won't beause your certificate is for abc.com. You need a wildcard cert that will be for something like *.abc.com.
Hope this helps,
Sean

How to use single sign-on for BCC and Experience Manager

Does anyone have experience in implementing single-sign-on for BCC and Endeca Experience manager for business users.

With the older versions of Endeca commerce stack there is no OOTB support for this. However with Oracle Commerce 11, SSO with BCC and Experience Manager are out of the box. Oracle Commerce 11 is released today.

Can we use single DB Adapter for multiple tables

Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharma

Hi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads,

Integrating AS 10.1.2 and AS 10.1.3 to use Single Sign-on for BI Publisher

Hi Everyone
I was trying to make the following demonstration scenario on the AS and the facilities that can afforded by Oracle to our company:
Note: I have just one machine for demonstration with Win2003 Enterprise
First of all, I need to build a portal for my company, this portal will be published to the web through port 80 opened by Microsoft ISA Firewall (ISA installed on different machine):
1- Portal should be integrated with oracle forms and reports with single sign-on
2- AS, should have single sign-on authentication to work on port 80 only.
3- Portal should be integrated with BI Publisher 10.3
For the objectives mentioned above i have done the following:
1- install AS 10.1.2 (infra and mid-tier) on the same machine with default installation options (http port 7777 for infra and port 80 for MT). (objective 1 = done)
2- to make sso works on port 80, i have used webcache as reverse proxy for sso, and it's done but i have error (WWC-41400), but it doesn't affect login on portal, and that is my first problem.
3- To have BI Publisher to work and authenticate users using single sign-on on port 80 (from outside), I had to install AS 10.1.3 (http on port 7779) on the same machine mentioned above, and then deploy BI Publisher on it, and that was ok, but problem is how to make use of single sign-on to authenticate people listed in oracle internet directory of INFRA installation mentioned above to use BI Publisher on port 80 only.
So, could anyone please guide me in problem 2 and 3.
Thanks in advance.
Anas

a couple of parameters not configured inside the Tomcat files. Now the SSO is working.
SNC is not required for sso in bi 4.0
http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4IntegrationintotheSAPEntreprisePortal+7.0.x
http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC
Best Regards

HCM Processes and Forms : Using single Form Scenario for Multiple Countries

Hi ,
I have a requirement to design a HCM P&F form ( Single Process, Single Form Scenario ) to support multiple countries. Form fields should be visible/invisible based on the country ( derived from the login Manager). please help me with the following questions.
1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
Thanks in Advance,
VR.

Hi VR,
1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
-You can use same form scenario or process for multiple countries if you are using fields based on international structure HCMT_BSP_PA_XX_R*. If you intend to use country specific fields then you may like to use different form scenario for different countries.
2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
- As such there is no limiation for the fields.Yes, form performs well with multiple rule configurations.
3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
I interpret you would like to derive & show fields based on same backend logic, in that case you should generic service.
If you want to show fields based on manager's logon then you should also use authorization BAdi.
Regards
Pooja

Using two versions of the one class together?? (I think)

Hi, see the following small program, where the user can enter an int, and the program draws that amount of lines, joined together at a centre point. The user can then move these lines around the centre by dragging the red dot at the end of the lines.
Anyway, what I want to be able to do, is have two different versions of this program running side by side, independently of each other. (ie one might have 4 lines, the other have 3). Each one, would also be able to read data from each other.
Is this possible?
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Lines4 extends JFrame implements MouseListener, MouseMotionListener {
private int startx = 200;
private int starty = 200;
private JLabel statusBar;
private Road roads[];
private static final int roadLength = 100;
private static final int circleRadius = 4;
private Road movingRoad;
public Lines4() {
super("Lines4");
String ret = JOptionPane.showInputDialog("How many roads are there?");
int numPoints = Integer.parseInt( ret );
double factor = 2.0 * Math.PI / ( numPoints ) ;
roads = new Road[numPoints];
for (int i=0; i<numPoints; i++){
int x = (int)( roadLength * Math.cos( factor * i ) );
int y = (int)( roadLength * Math.sin( factor * i ) );
roads[i] = new Road( i, startx, starty, circleRadius, startx+x, starty+y );
addMouseListener(this);
addMouseMotionListener(this);
statusBar = new JLabel();
getContentPane().add(statusBar, BorderLayout.SOUTH);
public void paint( Graphics g ) {
g.clearRect( 0, 0, getWidth(), getHeight() );
for (int i=0; i<roads.length; i++) {
roads.draw( g );
// MouseListener Event Handlers
public void mouseClicked( MouseEvent e ){
statusBar.setText( "Clicked at [" + e.getX() +
", " + e.getY() + "]" );
public void mousePressed( MouseEvent e ){
statusBar.setText( "Pressed at [" + e.getX() +
", " + e.getY() + "]" );
for (int i=0; i<roads.length; i++) {
if ( roads[i].onCircle( e.getX(), e.getY() ) ) {
movingRoad = roads[i];
public void mouseReleased( MouseEvent e ){
statusBar.setText( "Released at [" + e.getX() + ", " + e.getY() + "]" );
movingRoad = null;
public void mouseEntered( MouseEvent e ){
statusBar.setText( "Mouse in window" );
public void mouseExited( MouseEvent e ){
statusBar.setText( "Mouse outside window" );
// MouseMotionListener event handlers
public void mouseDragged( MouseEvent e ){
statusBar.setText( "Dragged at [" + e.getX() +
", " + e.getY() + "]" );
if ( movingRoad != null ) {
movingRoad.x = e.getX();
movingRoad.y = e.getY();
repaint();
public void mouseMoved( MouseEvent e ) {
statusBar.setText( "Moved at [" + e.getX() +
", " + e.getY() + "]" );
public static void main( String args[] ) {
Lines4 app = new Lines4();
app.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
app.setSize( 400, 400 );
app.setVisible( true );

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Use single sign on for multiple portal domains

Is it possible for a user to sign on once to a domain, and then be able to access other domains. What I'm trying to do is have one user registration page/login page, but use different portal server domains to present different sites, while at the same time having a type of single sign on, once a user has entered his credentials. Thus my registration process will create a new ldap user in an external directory, and i can then just point all the different domains to that External Ldap directory.

I wouldn't recommend this because it would affect performance plus there are potential other issues like conflict that you would run into ..
Everytime a user logs into a new session is created for him and this means a user might have multiple sessions on the server. The cookie that is also set is dependent on per portal domain so it might not work ..
An alternative approach might be to have multiple roles and then customize the role for different views. You can modify the membership code in such a way that based on certain criteria you can assign him to a particular role, equivalent to your domain. However the problem could be if you want to provide delegated admin, currently the delegated admin is only at a domain level.

Using the UI editor for a class that extends an abstract class

Hi,
At the moment it's unfortunately impossible to use the UI editor to edit a class that extends a certain abstract class. There is a way to circumvent this problem, by using a proxy class. Does anyone know how to create a proxy class for this purpose and how to register it?
Hopefully a future JDeveloper release will solve this problem. Is this a planned feature?
Regards,
Peter

I hope it works for you now (why using , but not indentation?).

How to use single JSP page for multiple users.

Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.

SuneelGoodatJava wrote:
Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.HTTP is a request/response protocol. You can't do what you're suggesting without "pushing" what you type to all the other users. That's not the way HTTP works. Maybe an applet and servlet.
%

Using single iTunes library for multiple computers

With the new Airport Disk utility, can I attach an external hard drive with my iTunes library and have multiple computers point to that library as the library for each?

BKRonline wrote:
neptune2000 wrote:
A BIG WARNING (...) If you are a good guy and use ONLY one computer to read/write (i.e., to copy music to it) and all the others are read only (which cannot be enforced in software), then you're OK. Consider yourself warned.
just to clarify...
Use ONE computer and ONE COMPUTER ONLY for purchasing / adding new content to the 'master' iTunes library area. Use ANY OTHER COMPUTER that's looking at that 'master' iTunes library for reading (playing back).
Yes. If you can enforce it by "persuasion", not software
Would there be a conflict if someone rates songs from other computers etc?
Yes. If they both rate at the same time.

How to use single web form for multiple secure zone signup?

I have multiple secure zones in my website. I want to sell membership of secure zones to users of my website. I want, users signup for multiple secure zone of their choice and submit payment. Is it possible if can you please explain a bit or refer me to an doc about it.
Thanks a lot for your time,

I realize this isn't likely, but do you know of a way to allow the user to select the secure zone to be registered (e.g. from a list of multiple secure zones or entering ID of one sz into a text input) from within a single web form? I wonder if this can be passed in through a parameter in the action URL or through a special system field.
Thanks

How can I use single hard drive for both Mac OS and Windows without changing the formats and reformatting?

I have a windows PC and a Macbook Air and a 1TB external hard drive. They said in order to transfer large files into the hard drive you have to change the format of your hard drive (which would be from MS-DOS to Mac Os extended) so how can I use my external hard drive on my windows PC without reformatting its files? Please heeeelp

Natively Windows can read and write to NTFS, FAT32, and exFAT while the Mac can read and write to FAT32, exFAT, and MacOS Extended.
Option 1: You can purchase driver software for Windows to allow it to read and write Mac's MacOS Extended or you can purchase a driver to allow the Mac to read and write to NTFS.
Option 2: you can format the hard drive for exFAT and use it with both Windows and the Mac without purchasing any special drivers. (Obviously the 4GB file size limit is why you don't want to use FAT32)

Acrobat 9-Want to use single form, not for data collection

I have created a form that I want to give to my employees using Acrobat 9 Pro. The only options I see are to send the files and let them use them to re-submit. I don't need the information back. This is merely a checklist of information that they can keep for themselves for the project they are on. It will be stored on the file server accessable and editable at any time. If I save the form and open it from somewhere else using Adobe Reader, I can fill in the form fine, but if I save it after having changed it, it loses its "Advanced" form functions (mostly checkboxes and textboxes) and I cannot edit the form anymore.
I just want to be able to create a form that can be opened, then "save as" for each employee to save their own copy per job.
Thanks!

... and 7 is using oracle 8.1.7 client.From your sales representative. 8i is no longer available for downloading,because desupported since many years.
Werner

Using single version DPS for college class

Similar Messages

Maybe you are looking for