Using skip logic to show sections of the form a set number of times
Hi
I have form which i need all to fill out basic information and a section which asks for furtehr information if a certain condition is true. what i'm looking ofr is this section of the form to be shown again as long as a condition is true or for x numbe rof times.
the form collects basic information about event companies and information about one event, i have a question which asks howmany events per year do you run. if this is more than one or set to true section part of the form would need to be shown again for x number of times to collect the information about thos events also.
If not is there any workaround i could implemnet using skip logic to acheieve an efective solution?
thanks
Yeah that is the work around. This post explains how:
http://forums.adobe.com/thread/1142978?tstart=0
Its a little tedious to setup up but it should work.
Randy
Similar Messages
-
I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
How can I get a date picker or wheel to show up in the form to make filling in a form with a lot of
how can I get a date picker or wheel to show up in the form to make filling in a form with a lot of dates more easy?
There is no built-in date picker available for forms created in Acrobat. There are some third-party solutions involving JavaScript (either a large collection of fields or a custom dialog) though. Also, text fields with date formatting will use a wheel type date picker on Android/iOS devices with Adobe Reader.
-
How do i repeat a section of the form can i copy and paste?
How do i repeat a section of the form with out creating it again.
Is there anything special about your drop downs (lots of choices)? Are the drop downs part of the selection? You may need to select all of the fields in the section then add the drop downs to the selection by using control-click (command-click on Mac).
-Jeff -
Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks
Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP -
Hello, Im trying to Install ITunes 7.2, and I get this error:
"Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
I'd be indebted to any suggestions or resolutions!
Thank you!
E Machines T6216 Windows XPHi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP -
"Unable to install the GEAR driver set at this time...."
Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
Please help!
--JonWhen you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
It requires editing the registry so be careful. -
Show image on the form Java WS gets image. Call this WS on button click
Hi,
Is there a way to show an image on the form. On the form I have along with the data I have a button that when clicked get and show the image itself on the form. I have a Java WebService that gets the image from the remote location. How can I make the button click event to call this Web Service and show the image on the form itself. Any help is appreciated.
ThanksWHiteSox, are you on client/server or web version.
which version of forms are you using.
something i can think of is.
during the click to call the webservice, copy the image to the local system.
next step is, using READ_IMAGE_FILE built in which reads the image from the local file system and displayed on the forms image item. -
The currency on my itunes store when using my iPhone is in Japanese yen, the menu is in Japanese too. I have changed the country using the flag at the bottom of itunes for windows, I have synced my iphone and restarted it, but it still has not changed. I also cannot set up a payment method for itunes as it keeps asking for japanese bank details? Help!
The currency on my itunes store when using my iPhone is in Japanese yen, the menu is in Japanese too. I have changed the country using the flag at the bottom of itunes for windows, I have synced my iphone and restarted it, but it still has not changed. I also cannot set up a payment method for itunes as it keeps asking for japanese bank details? Help!
-
RTP's are not showing up from the forms
Case1:
========
I have a business rule which has seven RTP's. I have unchecked the Hidden Value for the BR in the Calculation Mgr.
I have included this rule in a Menu and executing it from the form.
Here it is not showing the pop -up for the RTP's but straight away taking the default values of the form combination and executing properly.
But I need the RTP to change the combination.
Case 2:
========
The Same Business rule is working fine when we do a launch form (Menu--> Tools---> Business Rules--> Launch). the RTPs are coming.
Case 3:
========
I also tried testing the RTPs by including it at "Run On Save", it is showing the RTP prompts properly.
But I need the Case 1 working
Please advise me, where I am missing for Case1.
Regards
MaheshHi,
In the menu definition, for the business rule item, there will be a drop list called "Required Parameters". Modify the value there depending on what parameters you want to obtain from the form.
Thanks,
JM -
How to suppress the Forms special message on run time (forms 6i)
Hi,
I am using forms 6i and got the following message on run time. How do I suppress this message on run time? I don�t know the message code of this message, may be it is the prompt or some other type of message.
However I also used the system variable MESSAGE_LEVEL to suppress this message but it did not suppress.
For Example:
:SYSTEM.MESSAGE_LEVEL := '25';
Please send the code to suppress this message.
FORM MESSAGE:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands.
Thanks
AmitDear Frank,
Thanks for reply.As you said I keep the value <NULL> in the Form Module properties palette.But that forms message did not suppress and it still display.The message is:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands
Could you please give me its solution how to avoid that message?
Thanks
AMIT -
Read Data's from the Form step type at run time
Hi Experts,
I have the 'Form' step type in my workflow and it will displays some values at the Run time. In this form I have one IO field called 'Comments'. So at the runtime manager can Enter the comments on it.
Now my need is I need to get the 'Comments' data from that form. How can I get this value?
Thanks in Advance,
Helps will be Appreciated..I got the solution.
Thanks All.. -
Thanks for looking! i am making my first flash site, and im
not sure what to do next in regards to navigating through the site.
I have different sections, home, info, hardware, equipment, etc,
but im not sure how to make each section appear when you click the
corresponding navigation link. i have an idea but im not sure how
to execute it.
Should i make a movie clip for each section (home, info,
hardware, contact), then place each movie clip in its own frame on
the main time line, and on each navigation link button (each one is
a movie clip) use action script and put a gotoAndPlay() code with
the frame number of the corresponding section? so when you click
it, it goes to that frame which has the movie clip that has the
content for that part of site, say contact, or info?? if so how can
i do this?
that sounds really confusing and im sorry but please help out
a beginner! Thank you and happy halloween!
-Matt
here is a link so you can see the.swf
[url]http://www.filedorm.com/show.php/7839_INTOUCH.swf.html[/url]
and also here is a link for the .fla
[url]http://public.me.com/mattsh*t[/url]
your going to have to copy and paste that in your browser
since the world filter on here. just repleace the " * " with an " i
"Targeting specific timelines in a flash movie can be daunting
in the beginning. But if you start from the main timeline (_root)
and build brom there, it becomes easier to understand.
For eg:
If you have 2 movieclips on your main timeline (_root).
Navigation and Pages.
Inside Navigation you have the buttons, and each button is a
separate movieclip.
Inside Pages you have each page, each a separate movieclip.
to target a specific page number, from a button, there are 2
ways you can go about it. The method that Ned suggested is called
RELATIVE.
-meaning that you target FROM WHERE YOU ARE.
the second method is ABSOLUTE.
-meaning you target FROM MAIN TIMELINE.
Relative is good, but can be confusing when using dot syntax.
Absolute is straight forward and easy to understand, and can
be used from anywhere in the whole movie. The downside, is that it
generally requires a bit more typing.
In the example I stated above, it does not require more
typing. simply say:
_root.page.gotoAndStop(number);
This line can be used from anywhere in your movie, at any
timeline depth, and will work with no worries.
You can also have ALL navigation code on the main timeline on
the first frame. Simply designate the path to the specific button
like so:
navigation.home_btn.onPress = function(){
doSomething;
this tells Flash that the button named "home_btn" located
inside the movieclip called "navigation" will have to doSomething
when Pressed.
I hope this helps you understand targeting a bit more.
Good Luck. -
LOGIC PRO 9 - glitches in the form of crackles/pops/snaps in audio
hey guys, im new to logic but im not new to music production. ive been having alot of problems with my logic studio 2.
the problems are as follows
.when about halfway through a new track logic suddenly decides to add a crackle sound in an audio file. This happens even when the file is muted and also i have used many different buffer sizes to try to rectify this. I have also tried starting a completely new song with different audio and still the same problem happens. this problem also happens when i have disconnected all of my interfaces including my soundcard. after doing this i have realized that the problem must lie within logic and i am completely clueless as what could be causing this very annoying problem.
if anyone could help i would very grateful
thanks
dj kinxhey logic expert! you fixed my problem.....its the most simple thing and i didnt even think about it! it was a psp vintage warmer that was causing the problem
cheers
dj kinx -
I purchased a ringtone on My Verizon via my computer. They sent me txt message with the media but I can't figure out how to save it as a ringtone. The long touch method doesn't work. It's not anywhere in my media files, and frankly I just joined verizon but they have proven a bit difficult. On thin ice already, this isn't helping.
Have you managed to save it to your phone? If so, download a file explorer app (like Estrongs file explorer) from the Play Store. Open up the file explorer app and navigate to the "Download" folder. Scroll through your downloads to locate the ringtone file. Select it and use the file explorer's copy or cut function to put the ringtone file in the clipboard. Back out of the "download" folder to the "sdcard" level. Then look for a "ringtones" folder. Select it to open it and view the contents. Using the file explorer, paste the ringtone file to that folder. Back out of the file explorer app. The ringtone will now be available in the "phone ringtone" selection list.
Maybe you are looking for
-
Emailing video in an interactive PDF
Hi, I'm having an incomplete result from an interactive PDF made in InDesign CS5. I am using a MacBook Pro with OS 10.6.8. I made a 1-page invitation. It has two images. One is static, one is Flash video. I imported the Flash, and then I used the Med
-
IChat AV won't let me have a video/audio conversation
When I try to have a video/audio conversation, iChat says the communication couldn't be established for I have not responded to the invitation (even when I launch it). Last year I used iChat and iSight while connected on an air port station; today, i
-
Where do I find my apps after the update to IOS5?
I updated my iPhone 4 to the new iOS5 and now none of the apps are on the iPhone. Also all music is away. Where do I find them?
-
Within say the past month or so did something change where we no longer have access to certain fonts? The ones I currently know of that are either missing or messed up are Minion Pro and the Myriad Pro has just the Regular type option? I notice this
-
Update descriptions on Apple site with no download button
Hello, I found this update for OS X about the Flashback trojan and for some reason there is no download button for it : http://support.apple.com/kb/HT5242 For comparaison / example, this one has a download button : http://support.apple.com/kb/DL1517