Using Smartwatch 3 AND Smartband SWR10 together?

Hi@all,
i´m a new SmartWatch 3 owner since 2 days ans also using a SWR10 from the first day
Is it a problem to use both devices with lifelog? What about the step counter, what device gives the values? Both of them? GPS in the Smartwatch 3 will be used for walking, driving, etc, right?
Logging is enabled in Lifelog App, also both devices are shown in smartwear menu...
Greetings,
SirRobin

As Alex said Your device will only work with one device so if your band is recording sleep and is been logged then that is the dominant device which will record all other info
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Cannot use styleName and fontStyle property together in Label?

Hi All,
I am using Label component with the following attributes set,
see code 1)
but in my CSS I defined the style myStyle as below see code
2)
Here I am trying to use embed a font and use the style in the
Label.
I want the other styles to be given seperately like italic
and bold using "fontStyle" and "fontWeight" properties of a Label.
see code 3)
The problem here is that,
If I introduce any of these "myStyle" is not working. I mean
that the font which I embeded is not implemented. Its taking its
own default font. But If I remove fontStyle and fontWeight
"myStyle" is working properly.
I hope I had made my problem clear.
Any help would be appreciated.
Thanks.

"COKFlex" <[email protected]> wrote in
message
news:[email protected]...
> Hi Amy and Greg, Thanks for your replies.
>
> Yes I knew that I can use the fontstyle and fontwidth in
my CSS. Before I
> proceed next, let me explain you about my requirements
and why I am using
> embedded fonts.
>
> My requirement is to have all the font related styles as
configurable from
> an
> Xml file like .
>
> <Text>
> <Forecolor>#FFFFFF</Forecolor>
> <Backcolor>#000000</Backcolor>
> <Fontname>TimesNewRoman</Fontname>
> <Fontsize>30</Fontsize>
> <Fontstyle>normal</Fontstyle>
> <Fontweight>normal</Fontweight>
> </Text>
>
> Which I can read at run time and apply the styles.
>
> Ok Now I am coming to the need to using embedded fonts.
If I didnt embed
> the
> fonts the text displayed in my application are not
smooth. But its smooth
> if I
> use embedded fonts. {It is possible if we install the
fonts from the
> Windows CD
> [Control Panel->Regional Language and
Setting->Language Tab->Supplementary
> Language support] options>} But I observed that few
system doesnt have
> that
> installations. So the fonts which I am trying to use in
the configuration
> xml,
> even though the system has that font, its not appearing
smoothly in my
> application.
>
> ok, so next I decide how I make the embedded fonts as
configurable. I gave
> the
> fontname as the stylename and give that stylename in the
configuration xml
> as I
> mentioned in my previous post.
>
> And I implemented that using styleName="<value read
from the config xml>"
> which inturn refers the stylename I used in the CSS for
the embedded font.
>
> As I mentioned earlier, all the styles I want it to be
configured, I
> cannot
> give italic or bold in the CSS style instead it has to
be read from my
> config
> XML.
>
> So I decided to use the fontStyle and fontWeight
properties of the Label.
> So
> then the problem comes, if I use stylename and fontstyle
together,
> fontStyle is
> actually overriding the styleName's embedded font and
applying style as
> italic
> but not with the embedded font which ultimately results
in not giving me a
> smoother display.
You can actually change the CSS declaration itself. But I
think you will
also need to embed the other forms of the font if you want to
use them.
HTH;
Amy

Using Keynote and iPhoto slideshow together

Computer: 12" Powerbook G4, 1.5ghz
Display: 23" Apple Cinema Display (1920x1200)
Software: OSX 10.4.9, Keynote 2, iPhoto 6
Hi everyone! Above are the specs for the project I'm working on and here's the problem I'm having:
I am trying to create a makeshift kiosk display for an upcoming event using slides in Keynote and a picture slideshow in iPhoto. I'm planning on running it off my Powerbook to my 23" Cinema Display.
I'm using Keynote for the presentation content because of the motion effects (transitions, build-ins, etc.) and iPhoto for the image slideshow because of the Ken Burns effect (which I don't believe Keynote has). Both look great running seperately, however when this is being displayed at the show, I'll need both to run back to back automatically, without having to manually switch back and forth between applications.
I have both the Keynote presentation and the iPhoto slideshow displaying at 1920x1200. I've tried exporting the iPhoto slideshow to Quicktime, but it won't export any higher than 640x480. Does anyone have any ideas on how I can make this work? I won't be able to operate the computer when this is running, so I really need to find a way to make everything run seamlessly while keeping the high resolution of the 1920x1200 monitor.
Any advice would be GREATLY appreciated!
Thanks,
-Steve
PB 12" 1.5ghz Mac OS X (10.4.9)

iMovie is a DV editing app and the final results would still make a 640X480 file.
I would change a few things to make everything work together:
First is the display resolution. You want the 23 inches to be used so just reduce the display preferences to try and match your QuickTime file. 800X600 sounds about right but larger will still work as H.264 Video scales up in size very nicely.
This would force you to "reduce" the dimensions of the Keynote file but that shouldn't be much of an issue.
QuickTime Pro could also be used to "change" the dimensions of the 640X480 file. Again, H.264 scales up in size and would look pretty good at even double size.
The goal is to have them both at the same dimension and then match the monitor resolution.
Easier to change the display than the files.

Using Thunderbolt and DisplayPort devices together

Hello!
Is it possible to use HDD storage connected via thunderbolt (WD My Book Thunderbolt Duo) and monitor with display port together with one thunderbolt port on Mac? Or thunderbolt chain will work only for all thunderbolt devices?
Thanks!

The Thunderbolt pass-through/daisy chaining on most TB drives will only work with a TB display (or anther TB device) not with a display port adopter.

Using Choose and @inlines commands together

I am looking for help on how to structure Choose using @inlines. I can get @inlines to work with IF statements and I can get CHOOSE / WHEN to work on it own, but I have a couple of places where I need to use the combination of CHOOSE and INLINES together. I have tried several different options but can't seem to find the magic combination.
Thanks for any help
Mattern

Would this example help?
<?choose@inlines:?>
<?when@inlines:EMPLOYEE_NUMBER=''?>No Number<?end when?>
<?otherwise@inlines:?><?EMPLOYEE_NUMBER?><?end otherwise?>
<?end choose?>
Thanks!

Lifelog and smartband swr10

Hi, can I ask you how can i get data from my smartband to Lifelog? It works, notification and morning alarms are very good, but I have no idea how to transport data. NFC connection says error, bluetooth is on, band is connected, but data about sleeping and steps no...

Try to reset the smartband:
http://support.sonymobile.com/global-en/swr10/userguide/Resetting-the-headset/
Pair it again with Z3.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Using iMac and Mac Mini together to share screen and data

I may buy a Mac Mini in addition to my iMac 27" (Mid 2011), mostly so that I can use it for slide show presentations via a digital projector. But I don't have a separate monitor (or suitable TV), so I wouldn't be able to use the Mac Mini other than with a projector. Not a good idea. So I backed away a bit.
TDM Mode
Then I found that I could use an iMac screen as a monitor if I connect the two via a Thunderbolt to Thunderbolt cable in Target Display Mode, TDM (http://support.apple.com/kb/HT3924). A short cable costs $35.
Then I thought about those times when Photoshop is tying up my computer for hours while I batch process heaps of images (you can't use Photoshop while it is batch processing), and I wondered: why not jump across to the Mac Mini during those times?
I store all my data on external firewire drives. Nothing on the OSX drives. This leads me to a few questions. Assume I have the Mac Mini connected to my iMac in TDM via a Thunderbolt to Thunderbolt cable.
Ques 1
What is the best way of being able to access my data files (on external firewire drives connected to the iMac) via the Mac Mini? A scenario might be:
I've started a batch process on the iMac which ties up Photoshop and much ties up;
I switch the screen to display the Mac Mini;
I want to access my data on the firewire drives, drives that the iMac is already accessing.
Ques 2
Can I use the thunderbolt connection to not only transfer screen data, but ordinary data?
Ques 3
Or should I run an ethernet cable between the two and set up a network?

One question, how does this affect syncing to iTunes? Will it recognise the iPhoto drive on both computers (depending which one has the drive at that time) if I sync photo albums to my iPhone and iPad?
iTunes will always sync with the last iPhoto library that has been used on the computer. If you make sure, that the drive has been connected, before you launch iTunes, it will work, like Old Toad said.
Also, if I do it this way doesn't it become vulnerable due to not being connected at all times to time machine?
if you use the drive with the library the mainly on your iMac, you could exclude it from the TimeMachine backup of your Laptop. Keep it connected to the iMac, when you are not using it on the LapTop.
What would be the process if I only wanted to do this periodically and wanted to keep the main library on the iMac. Could I work on the drive on the macair and then save it back to the iMac? How do I do that without duplicating the files? If I just select copy and paste, will it only overwrite the changed files?
You would have to copy the entire library back and forth again and again, or use iPhoto Library Manager, to merge the changes into the library on the iMac. It would not be an easy workflow.

Using iPhoto and PhotoShop Elements together

Hi all,
I purchased my lovely little MacBook Pro a week ago and the onyl problem I have had so far is dealing with iPhoto.
I love using iPhoto to upload and browse my photos, however I prefer editing them in Photoshop Elements.
I have found I have the following problems:
- Cannot open a photo from within Photoshop Elements
I have got around this my right-clicking the iPhoto Library folder within Pictures, selecting the Open Selected Items (or something like that), then when I have found the photo, again right-clicking and saying Open with PhotoShop Elements.
Is there an easier way to do this?
- Once I have edited my photo in Photoshop Elements, I can't view the edited photo in iPhoto.
Any ideas?
- In iPhoto, I like to create an Album of photos I would like to edit or upload to my online development company, but iPhoto doesn't seem to save albums in any searchable fashion, so I have to manually move each one into a folder on my desktop. This creates 2 copies of the same photo, which will eventually use a lot of hard disk space.
Is there an easier way to do this?
Many thanks,

Sascha
As Larry points out, you need to set PSE as an external editor.
The Right Click Hack is unsuported, and more importantly, is precisely why you can't see the changes in iPhoto.
You can set Photoshop as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop, and when you save it it's sent back to iPhoto automatically.
- In iPhoto, I like to create an Album of photos I would like to edit or upload to my online development company, but iPhoto doesn't seem to save albums in any searchable fashion, so I have to manually move each one into a folder on my desktop. This creates 2 copies of the same photo, which will eventually use a lot of hard disk space.
Albums are virtual entities - there is no corresponding folder of images. So, create the album, do your edits as described above, then to upload, if you're development doesn't have an iPhoto export plug in, select the Pics and go File -> Export and export them to a folder on the desktop. iPhoto will create a copy of the pics incorporating your changes. Upload from there - and after your upload is finished, trash the copies on the desktop - your pics are safe in iPhoto.
Regards
TD

Can't use Airtunes and iTunes Radio together since recent update.

Hi,
I was using iTunes to listen to internet radio through my speakers connected by Airport Express.
The gear:
Signal starts with cable modem, ethernet connected to Belkin wireless Super G Router.
Then to my great love: Pismo PB with Airport card
There I'm running iTunes and using Airtunes to send signal to Airport Express which has speakers connected.
This worked until recently.
Now, I can either use the Express for Airtunes OR my wireless router to receive internet radio.
HHHHHHeeeeeeeeeeelllllllllllllllllllllllpppppppppppppppppp

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

CAML Query help using recursiveall and date filter together

Hello,
Please let me know what is wrong with the query below,
<View Scope='RecursiveAll'>
<Query>
<Where>
<Leq>
<FieldRef Name='Modified'/>
<Value Type='DateTime' IncludeTimeValue='FALSE'>date value</Value>
</Leq>
</Where>
</Query>
</View>
Above query returns zero items, it should return 3 items in my current scenario.
If I do just the folllowing, three items are returned
<View Scope='RecursiveAll'>
<Query>
</Query>
</View>
I need date filter to work with recursiveall . Not sure what is wrong with the query
Student For Life

Hi,
Per my understanding, you might want to use “RecursiveAll” with date filter in your CAML query statement.
I suggest you take the code demo below which writes in Server Object Model for a try in your environment to see if it can work for you:
using (SPSite oSiteCollection = new SPSite("http://yoursite"))
using (SPWeb web = oSiteCollection.RootWeb)
SPList list = web.Lists["List1"];
SPQuery qry = new SPQuery();
qry.Query =
@" <Where>
<And>
<Leq>
<FieldRef Name='Modified' />
<Value Type='DateTime'>2015-03-07T12:00:00Z</Value>
</Leq>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>0</Value>
</Eq>
</And>
</Where>";
qry.ViewFields = @"<FieldRef Name='Title' />";
qry.ViewAttributes = "Scope='RecursiveAll'";
SPListItemCollection items = list.GetItems(qry);
foreach (SPListItem item in items)
Console.WriteLine(item["Title"]);
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Using Mail and Address Book together

In the Address Book, I've set the sort to LAST name, then FIRST name by universally switching their default order. When I insert the name of a recipient in Mail's "To:" window, the two programs are intuitive enough to find the address whether I use either the person's first or last name. However, when I tab to the next line, it rearranges the order of the person's name to the way it's listed in the Address Book (example: "Smith Bob" instead of "Bob Smith").
Can this be changed? It looks rather clumsy.

My Mail Preferences are set the same as you.
Thank you for your offer to dig deeper.
I'm beginning to think that it's simple a "wrinkle" in the way Mail integrates with Address Book, and that it'd probably be best to go back to organizing things in the AB on a [First}[Last} name basis. I am just used to things being sorted in a descending order based on the person's last name. Obviously, I'll have to adjust my thinking <grin>.
I will leave the question as Unanswered for a day or two, in case someone else might chime in with a solution. If not, then I'll return to the question and mark it as "Answered."
Thanks again.

Using java and BC4J datatags together; causes problem

Hello
This is a piece of my code, and I am trying to add data,
retrieved from the datasource, to add to a Java Vector. However,
this does not work (at the part where the **** are). Can anybody
tell me what I am doing wrong?
I would appreciate it very much.
Thanks!!
<%int i=0;%>
<%Vector countryid = new Vector();%>
<jbo:CreateViewObject appid="EdgarBusinessComponentsModule"
name="CountryGroupView" rangesize="10" >
SELECT llg.loc_id AS LOCID FROM loc_loc_grp llg
WHERE llg.loc_grp_id IN (
<%for(i=0; i<countryGC.length; i++) { %>
<%if (countryGC.substring(countryGC[i].length()-2,
countryGC[i].length()).equals("GR") == true) { %>
<%=countryGC[i].substring(0, countryGC[i].length()-
2) + ", "%>
<%}%>
<%} %> NULL)
</jbo:CreateViewObject>
<jbo:DataSource id="CountryGroupDataSource"
appid="EdgarBusinessComponentsModule"
viewobject="CountryGroupView" ></jbo:DataSource>
<jbo:RowsetNavigate datasource="CountryGroupDataSource"
action="First" />
<jbo:RowsetIterate datasource="CountryGroupDataSource" >
<jbo:ShowValue datasource="CountryGroupDataSource"
dataitem="LOCID" ></jbo:ShowValue><BR>
<%/******** THIS ROW GIVES ME A HEADACHE: *******/%>
<%countryid.add(new String("%><jbo:ShowValue
datasource='CountryGroupDataSource' dataitem='LOCID'
</jbo:ShowValue><%"));%></jbo:RowsetIterate>

This forum is intended for members to suggest improvements or
changes to OTN services. Please repost your question in the
appropriate Java forum.
Best regards,
OTN Team

Using Smartwatch 3 AND Smartband SWR10 together?

Similar Messages

Maybe you are looking for