Using social media share codes with custom buttons

Is there a way to use custom buttons/icons for social media share, like, etc..? I have tried inserting the html with no luck. The canned social widgets don't really match the look of the site I am designing.

Facebook doesn't allow changing that. Refer to their Guidelines with Do's and Don'ts here - https://www.facebookbrand.com/guidelines?asset=5&media=1,2,3&platform=
Thanks,
Vinayak

Similar Messages

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

HT2736 I was sent a code with redeem button & I get in a loop of Redeem to Sign in. I never get to redeem the code. I am already signed in.

I was sent a code with redeem button & I get in a loop of Redeem to Sign in. I never get to redeem the code. I am already signed in. What can I do to solve this?

Hi kvnkines,
Welcome to the Support Communities!
The article below explains how to redeem an iTunes Gift Card.
The terms and conditions are usually printed on the back of the card.
If you have a specific question about a card, follow the information in the articles below to contact iTunes Store Support.
iTunes Store: How to redeem a code
http://support.apple.com/kb/ht1574
If you have trouble redeeming your code, this article may help:
iTunes Store: Invalid, inactive, or illegible codes.
http://support.apple.com/kb/TS1292
Cheers,
- Judy

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

How to share code with peers

Hi All,
I am new to Netweaver environment but have previously worked with other JAVA IDEs.
I need to know if it is possible to share a Webdynpro DC project among my peers.
For instance, say, my DC project has 2 Views. I want to work with one of them but also see what my team mate is doing in the other view. At the same time, I want to share my code with him.
For regular java projects we can achieve this with the help of a version control tool like VSS or CVS.
What is the equivalent in SAP Netweaver.
Could some one please point me in the right direction regarding this?
All your help will be highly appreciated.
Thanks

Hi
Vss is version control tool right .
To achieve same in WD Java, NWDI (NetWeaver Development Infrastructure ) is used .Which Increase reusablity and reuse of code segments by encapsulating functionality into small, reusable building blocks.
To know more about it read the following doc
1. [NWDI wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/netweaver%252bdevelopment%252binfrastructure%252b(NWDI)]
2.[Setup an NWDI|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f]
3.[Development Infrastructure|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60c7c351-1344-2a10-a6b0-c2f148f59ef0]
3.[NWDI DC Archive|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6061795e-2bd5-2910-b0ad-caf08ff20531]
Best Regards
Satish Kumar

Adding social media share options within a Indesign 5.5 doc

Hi, I'm wanting to share articles within a document via social media sites like the Share this button on Wordpress. Is it possible, has anyone done it before? cheers

You can link to individual pages in the pdf, just not individual articles/sections. This would help you add a link to a specific page on a social media site and share that link, rather than doing it through the pdf itself.
See: http://kb2.adobe.com/cps/317/317300.html

Using FTP to share files with 3 Windows computers - Not Working Anymore

My office is trying to share files with a number of computers, both Mac and PC. The files are housed on a Mac OS 10 version 10.6, and I've enabled both AFP and FTP sharing. The macs in the office connect just fine, but yesterday, after three weeks of working perfectly, the Windows machines stopped connecting to the Mac. They get a "The Connection with the server was reset" error. We don't use an FTP client - I just had the PCs connect to the Mac by typing ftp://address in their explorer window.
I've tried restarting all computers, disabling and re-enabling FTP sharing, and I've triple checked permissions, etc. Is there anything else I should be investigating? I'm trying to look into our firewall here, but since our computers are rentals and another company controls our internet access I'm not sure what I can do there. (I tried setting up workgroups, but said company won't give me administrative access over the PCs or access to the firewall, and there's no IT dept to speak of)
As I'm sure you can tell, I'm just a regular old office monkey who inherited the "IT" job with no IT experience, so I apologize if any part of this question is stupid.

I know just about nothing about this, but common dianostic practices include looking at the logs.
Either use Applications -> Utilities -> Console, which has a search function that might make this easier.
Or go looking around /var/log (which you can use Unix 'grep' to do your searching ). Then again, NOT ALL logs are in /var/log, and Console knows where more logs are located.
2 logs that might be a good starting point would be /var/log/messages and /var/log/secure

Using the same action sequence with multiple buttons and exclusive conditional interactions

Hi all,
first of all, pardon me for my english and if I post questions already answered, but I can't find anything about that.
I'm new to flash and I decided to use Flash Catalyst to speed up the building process of a multimedia presentation for university.
I have a menu with 10 buttons that change a text box on rollover (I converted it to a button label) and I need to reset the name of the current page on RollOut. Since the action sequence for it is the same of every button on one page, is there a faster way to apply the sequence than repeating it for every button? (I had to do it 10x10=100 times... and what if I made some mistake? )
Another question is I want to disable the interaction of the menu button of the current page, but conditional interaction let me choose only an "if in state" condition an not a "if not in state". How can I do this? should I simply disable the button on that page?
Thanks a lot for the help!
Cheers from Italy

I answered to myself by grouping buttons and disabling the button in his state.
Thanks anyway!

Jspinner with custom buttons

Hello,
How could I use my own buttons in a JSpinner ( I speak about navigation buttons).
thanks

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

How to use Fireworks JQuery Mobile Theme with Custom Icons in Dreamweaver CS6?

I understand how to create the custom theme in FW, I created one extra icon using the icon placeholder option. I then export the theme. FW spits out 5 css files and the png sprites. What do I do with the css files for the different png dimensions?? I don't understand how to get what I created in FW to work properly in DW. I can get the theme working but DW creates the jquery folder with the default icons, I need to get my custom png sprite in there. When I do this, it seems that it shifts everything since the dimensions are wrong. The theme css that FW spits out has a @import url for the css files styling the diff sprites but it still doesn't work. I'm at a loss as to how to get it all to work together.

Sorry, no knowledge of FW themes, but it would seem easier to adjust the positioning code
than to try redo your sprite image.

HT5188 Can I use a 'gifted' app code with AC?

I have an unused redemption code for an app that was gifted to me (the code was sent to me by a school administrator). Can I manually add this to Apple Configurator so that I can manage this app on our school iPads? I don't believe it was purchased through VPP, so it's not on a spread sheet that I can import to AC. It's a very expensive communication device app, so I need to be able to move the app between iPads as our students move through the school system. Thanks.

By default, whenever you connect a supervised device to Apple Configurator, any apps which were installed on that device by a user will be deleted.
With Apple Configurator v1.1 or later, you can change this setting in Preferences, under the Apple Configurator menu. http://support.apple.com/kb/HT5203
So, if you install the app as a "user" using whatever apple id you would normally use to install a standalone app, you can change the preferences setting in .1.1. You would not use Configurator to install the app but add it manually to the device being used by the student or group of students in question. Given that you only have one code you could not legally place it on multiple devices anyway so there is no point in loading it through Configurator.

Using Functions and/or Graphs with Custom Cell Formats in Numbers

I am attempting to use the AVERAGE function or create a graph in Numbers for cells with a custom format, however, I keep receiving an error message telling me that "Numbers can't be divided by Zero" or an empty graph.
The format I am using is for a split time for a certain distance, as in time it takes a runner to go around a track: minute:seconds.milliseconds i.e. 1:56.4
Is there a solution to the formatting or another way to accomplish having the correctly formatted cell and still be able to use functions and graphs.

Hi nich.lee,
You can't chart Duration formatted data without first converting it to another format. Also, you will get an error if you attempt to use the AVERAGE function on an empty range.
Here's an example of charting Duration data by using a conversion...
Best regards,
Jerry

Using Flash Media Live Encoder with a camera without FireWire

Hi,
Right now we have beeing using an old DV tape based camera connected to Flash Media Live Encoder via FireWire for live streaming.
We are looking at getting either an Sony AX2000 or HXR-NX5U camera as they are flash based. Unfortunately, they don't have FireWire ports.I image that I would not be able to stream via USB, but I'm not sure if anyone is familar with either of these cameras.
Does anyone know of any posisble way (ideally without new equipment) that this would work?
Ports on the HXR-NX5U
Audio Out      RCA type (CH-1, CH-2)
Component Out     RCA type (x3) via A/V multi connector
Composite Video Out     RCA type (x1)
S-Video Out     N/A (optional VMC-15FS is required.)
SDI Out     BNC (x1)
HD-SDI/SD-SDI selectable
USB     Mini-B (x1)
Thank you for your help!

Hi there,
You may be able to take the RCA connection out of the new camera and put it in to your old DV camera if it has the avaliable inputs?
Also, USB is sometimes used for video so I woul have a look around for some info about it with your camera.
failing that your best bet would be to either buy a cheap Aanlog to Digital Concerter (ADC) that takes in composite and firewire on the RCAs. this woul mean that you are using the lowest quality and resolution that is avaliabe to you though!
You could stump up of an SDI or HDSDI input from the likes of AJA or Blackmagic. this would also give you the digitised XLR audio inputs
Hope this helps!
Nick

Help with Custom Buttons

This is a Dreamweaver/Flash problem, didn't know what forum
to put it in. Just a heads up there.
I'm trying to edit a flash button template using flash. I go
to Flash, import the button, and edit it (the color). I then save
it and try to use it in Dreamweaver, but all that comes up when I
insert it is the Flash logo. Any help would be appreciated.
Thanks in advance,
Rock

As Omar said, replace the boolean with a transparent button. In this example I used a Square button from the Classic palette. I colored the border in one state to highlight which button is on.
The Test Control Border is the modified square button I used to replace the original radio button.
Lynn
Attachments:
TestRadioButton.ctl ‏9 KB
Test Control Border.ctl ‏4 KB

Can I use Apple Volume Purchasing Codes with Apple Profile Manager?

I am using Apple Profile Manager (on OS X 10.8) to manage some iOS devices. I would like to be able to push apps to users using Profile Manager, however, I cannot seem to find a way to import an Apple Volume Purchasing Program redemption code spreadsheet. Basically, I am looking for a way to deploy apps to the devices without the users having to purchase them using their own Apple ID's. I've done some research, and I have determined that this funcationality seems to be included in Apple Configurator. I am wondering if I can do the same thing in Profile Manager. I would rather not have to change my MDM solution, if at all possible. Thanks in advance, I appreciate it.

Hey JTShelatz,
just push you Apps with Profileservice. But just the amount of purchased licences .
Thats how I understood Apples VPP deployment strategy.

Using social media share codes with custom buttons

Similar Messages

Maybe you are looking for