Using Solaris 11 Express for a multiprocessor CAD/CAM x86-64 system.

I'm considering using Solaris 11 Express as the OS for a multiprocessor Computer Aided Design/Computer Aided Manufacturing custom built x86-64 system for my machine shop business. I would like clarification of the license in this situation.
Would I be allowed to use Solaris 11 for free under the open-source license, or would I have to purchase a commercial license? Would I have to pay for program updates? Does just the Oracle Solaris Premier Subscription for Solaris 11 require payment rather than the actual software as well? Would I be required to purchase an Oracle Solaris Premier Subscription to use Solaris 11 in my situation, or can I purchase the Oracle Solaris Premier Subscription at a later date.
I have a lot of respect the open-source concept, and I would only use Solaris while keeping it's license intact. So the answers to these questions are very important factors affecting my decision regarding whether or not my company will start to use Solaris.

I'm afraid you'll have to contact Oracle directly to clarify what applies in your situation.

Similar Messages

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

On my home PC, I operate with Windows XP and use Outlook Express for my email. Can my Outlook Express address book be imported by my IPhone4

On my home PC, I operate with Windows XP and use Outlet Express for my email. Can my Outlook Express address list be imported to my IPhone4

Not directly; OE is not supported by iTunes. You need full Outlook. Address Book in later versions of Windows is supported.

Using regular expressions for validation in i18n

Can we use regular expressions for validation of inputs in a java application taking care of i18N aspects too. Zip code for different locales are different. Can we use regular expressions to validate zipcode inputs from different locales

hi,
For that shall i have to create individual patterns for matching the inputs from different locales or a single pattern will do in the case of validating phone nos. around the world, zip codes etc. In case different patterns are required, programmer should have a konwledge of difference in patters for different locales.
regards
sdas

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

Request some help, over procedure's performance uses regular expressions for its functinality

Hi All,
        Below is the procedure, having functionalities of populating two tables. For first table, its a simple insertion process but for second table, we need to break the soruce record as per business requirement and then insert into the table. [Have used regular expressions for that]
        Procedure works fine but it takes around 23 mins for processing 1mm of rows.
        Since this procedure would be used, parallely by different ETL processes, so append hint is not recommended.
        Is there any ways to improve its performance, or any suggestion if my approach is not optimized? Thanks for all help in advance.
CREATE OR REPLACE PROCEDURE SONARDBO.PRC_PROCESS_EXCEPTIONS_LOGS_TT
     P_PROCESS_ID       IN        NUMBER,
     P_FEED_ID          IN        NUMBER,
     P_TABLE_NAME       IN        VARCHAR2,
     P_FEED_RECORD      IN        VARCHAR2,
     P_EXCEPTION_RECORD IN        VARCHAR2
    IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    V_EXCEPTION_LOG_ID     EXCEPTION_LOG.EXCEPTION_LOG_ID%TYPE;
    BEGIN
    V_EXCEPTION_LOG_ID :=EXCEPTION_LOG_SEQ.NEXTVAL;
         INSERT INTO SONARDBO.EXCEPTION_LOG
             EXCEPTION_LOG_ID, PROCESS_DATE, PROCESS_ID,EXCEPTION_CODE,FEED_ID,SP_NAME
            ,ATTRIBUTE_NAME,TABLE_NAME,EXCEPTION_RECORD
            ,DATA_STRUCTURE
            ,CREATED_BY,CREATED_TS
         VALUES
         (   V_EXCEPTION_LOG_ID
            ,TRUNC(SYSDATE)
            ,P_PROCESS_ID
            ,'N/A'
            ,P_FEED_ID
            ,NULL
            ,NULL
            ,P_TABLE_NAME
            ,P_FEED_RECORD
            ,NULL
            ,USER
            ,SYSDATE
        INSERT INTO EXCEPTION_ATTR_LOG
            EXCEPTION_ATTR_ID,EXCEPTION_LOG_ID,EXCEPTION_CODE,ATTRIBUTE_NAME,SP_NAME,TABLE_NAME,CREATED_BY,CREATED_TS,ATTRIBUTE_VALUE
        SELECT
            EXCEPTION_ATTR_LOG_SEQ.NEXTVAL          EXCEPTION_ATTR_ID
            ,V_EXCEPTION_LOG_ID                     EXCEPTION_LOG_ID
            ,REGEXP_SUBSTR(str,'[^|]*',1,1)         EXCEPTION_CODE
            ,REGEXP_SUBSTR(str,'[^|]+',1,2)         ATTRIBUTE_NAME
            ,'N/A'                                  SP_NAME
            ,p_table_name
            ,USER
            ,SYSDATE
            ,REGEXP_SUBSTR(str,'[^|]+',1,3)         ATTRIBUTE_VALUE
        FROM
        SELECT
             REGEXP_SUBSTR(P_EXCEPTION_RECORD, '([^^])+', 1,t2.COLUMN_VALUE) str
        FROM
            DUAL t1 CROSS JOIN
                    TABLE
                        CAST
                            MULTISET
                                SELECT LEVEL
                                FROM DUAL
                                CONNECT BY LEVEL <= REGEXP_COUNT(P_EXCEPTION_RECORD, '([^^])+')
                            AS SYS.odciNumberList
                    ) t2
        WHERE REGEXP_SUBSTR(str,'[^|]*',1,1) IS NOT NULL
        COMMIT;
       EXCEPTION
         WHEN OTHERS THEN
         ROLLBACK;
         RAISE;
    END;
Many Thanks,
Arpit

Regex's are known to be CPU intensive specially when dealing with large number of rows.
If you have to reduce the processing time, you need to tune the Select statements.
One suggested change could be to change the following query
SELECT
             REGEXP_SUBSTR(P_EXCEPTION_RECORD, '([^^])+', 1,t2.COLUMN_VALUE) str
        FROM
            DUAL t1 CROSS JOIN
                    TABLE
                        CAST
                            MULTISET
                                SELECT LEVEL
                                FROM DUAL
                                CONNECT BY LEVEL <= REGEXP_COUNT(P_EXCEPTION_RECORD, '([^^])+')
                            AS SYS.odciNumberList
                    ) t2
to
SELECT REGEXP_SUBSTR(P_EXCEPTION_RECORD, '([^^])+', 1,level) str
FROM DUAL
CONNECT BY LEVEL <= REGEXP_COUNT(P_EXCEPTION_RECORD, '([^^])+')
Before looking for any performance benefit, you need to ensure that this does not change your output.
How many substrings are you expecting in the P_EXCEPTION_RECORD? If less than 5, it will be better to opt for SUBSTR and INSTR combination as it might work well with the number of records you are working with. Only trouble is, you will have to write different SUBSTR and INSTR statements for each column to be fetched.
How are you calling this procedure? Is it not possible to work with Collections? Delimited strings are not a very good option as it requires splitting of the data every time you need to refer to.

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

I am using outlook express for my mail. When using internet explorer on PC I could set it up so I could simultaneously see all my inboxes, the mail details and a message preview. Can I do this on my Mac?

About accessing using a browser: I can get in using Firefox or Safari, butI cant set the page up to see all my inboxes at the same time (so I can file emails appropriately) or get a preview to save opening every mail

Using AP Express for Printing ONLY

Hey Discussions,
I want to purchase an Airport Express for the sole purpose (right now) of printing. Is it possible to use the Express without an Internet connection?
Thanks,
Mateo

Yes, you can use it as a client to an existing wireless network for printing or streaming iTunes.
AirPort Express Base Station (AX) - Client Mode Setup
- Plug the AX into a power outlet.
- On your computer, join the wireless network created by AX.
- Open AirPort Admin Utility. (Mac users: Find it in /Applications/Utilities/. Windows users: On the Start menu, point to All Programs and click AirPort.)
- After AirPort Admin Utility opens, the name of your AX appears in the list. Select it, then click Configure.
- Enter the administrator password if prompted.
- Click the AirPort tab.
- Enter a name for your AX in the Name field. (This name is how it will appear in AirPort Admin Utility; it may be different from the AirTunes remote speaker name. (Note that AirPort Setup Assistant does not allow you to differentiate these names, but AirPort Admin Utility does.)
- If your AX does not already have an administrator password, click the Change Password button to enter one. This password can be different from any network password, and is used for just changing settings on AX.
- In the same pane, under the AirPort Network heading, change the Wireless Mode from "Create a Wireless Network (Home Router)" to "Join an Existing Wireless Network (Wireless Client)."
- Type the name of the wireless network you want to join in the Network Name field. (Note: If you're using AirPort Admin Utility in Mac OS X, you may be able to choose the network from a pop-up menu. This is the name (or SSID) of your current wireless network with the Trendnet router.)
- If the wireless network is password protected, you will need to enter the password. (Mac users: Click Security Options, choose the level of password encryption from the Wireless Security pop-up menu, then enter the password. When finished, click OK. Windows users: Click Wireless Security, choose the level of password encryption from the Wireless Security menu, then click "Set WEP Password" to enter the password. When finished, click OK.)
- Click the Music tab to enter the name that will appear in iTunes as your AirTunes remote speakers. You can also enter a password to prevent others from streaming music to your speakers.
- Finally, click Update to send your new settings to AX.
Once the AX has had a minute or so to restart, it should join the existing wireless network, as indicated by its status light turning solid green.

Using regular expressions for validating time fields

Similar to my problem with converting a big chunk of validation into smaller chunks of functions I am trying to use Regular Expressions to handle the validation of many, many time fields in a flexible working time sheet.
I have a set of FormCalc scripts to calculate the various values for days, hours and the gain/loss of hours over a four week period. For these scripts to work the time format must be in HH:MM.
Accessibility guidelines nix any use of message box pop ups so I wanted to get around this by having a hidden/visible field with warning text but can't get it to work.
So far I have:
var r = new RegExp(); // Create a new Regular Expression Object
r.compile ("^[00-99]:\\] + [00-59]");
var result = r.test(this.rawValue);
if (result == true){
true;
form1.flow.page.parent.part2.part2body.errorMessage.presence = "visible";
else (result == false){
false;
form1.flow.page.parent.part2.part2body.errorMessage.presence = "hidden";
Any help would be appreciated!

Date and time fields are tricky because you have to consider the formattedValue versus the rawValue. If I am going to use regular expressions to do validation I find it easier to make them text fields and ignore the time patterns (formattedValue). Something like this works (as far as my very brief testing goes) for 24 hour time where time format is HH:MM.
// form1.page1.subform1.time_::exit - (JavaScript, client)
var error = false;
form1.page1.subform1.errorMsg.rawValue = "";
if (!(this.isNull)) {
var time_ = this.rawValue;
if (time_.length != 5) {
    error = true;
else {
    var regExp = /^([01]?[0-9]|2[0-3]):[0-5][0-9]$/;
    if (!(regExp.test(time_))) {
      error = true;
if (error == true) {
form1.page1.subform1.errorMsg.rawValue = "The time must be in the format HH:MM where HH is 00-23 and MM is 00-59.";
form1.page1.subform1.errorMsg.presence = "visible";
Steve

Using Regular Expressions for Completion

I'm trying to build a text completer for a simple little editor. The general idea is that I have a regular expression which describes the syntax of an expression and a set of strings which are all semantically valid cases of the expression (the latter of which is not particularly important to my problem). I would like to be able to determine, using the expression described, whether or not a section of text is capable of beginning a syntactically valid expression, not matching it.
For example, given the expression
"#[A-Za-z0-9]#" the string "#name#" is syntactically valid, whereas the string "#_blarg" is not. What I would like to do is be able to determine that "#partial" has the potential to match the pattern with more input, even if it doesn't yet. Specifically, the eventual use will be in such a case as the string X=#partial+3. If the cursor is positioned before the "+" and my user presses the completion keystroke, I want to recognize that "#partial" is what I need to recognize. Also, positioning the cursor immediately after the "=" and pressing the keystroke will do nothing, since nothing before the "=" is capable of matching the pattern properly.
Is this possible? I don't have to use this exact approach, but it is important that I be able to use the regular expression in detecting a partially completed expression. If I can, the set of regular expressions which already exist in the code can be used to drive the auto completer. Otherwise, I'll have to write a special recognition module for each case; that wouldn't be pretty.
Thanks for your time! I'll provide other information upon request, if it'd help. :)

Thank you both for discussing this; it has definitely helped me in reaching a better understanding of uncle_alice's answer to my problem. I've adjusted my code to use this approach and, for the most part, it seems to work.
I say "for the most part" because I am compiling Patterns with the case insensitivity flag. This appears to do horrible, horrible things. Take a look at the following code, modified from uncle_alice's example:
String[] str = {"#test#hello", "#tes", "blargblarg", "", "#test#", "S"};
String rgx = "#[A-Za-z0-9]+#";
Pattern pc = Pattern.compile(rgx);
Pattern pi = Pattern.compile(rgx, Pattern.CASE_INSENSITIVE);
for (String s : str)
    System.out.println("    For string: "+s);
    for (Pattern p : new Pattern[]{pc, pi}) // once for each pattern
        Matcher m = p.matcher(s);
        if (m.matches())
            System.out.printf("Matched '%s'", m.group());
        } else
            System.out.print("No match");
        System.out.println("; hitEnd = " + m.hitEnd());
}That produces the following output:
    For string: #test#hello
No match; hitEnd = false
No match; hitEnd = true
    For string: #tes
No match; hitEnd = true
No match; hitEnd = true
    For string: blargblarg
No match; hitEnd = false
No match; hitEnd = true
    For string:
No match; hitEnd = true
No match; hitEnd = true
    For string: #test#
Matched '#test#'; hitEnd = false
Matched '#test#'; hitEnd = false
    For string: S
No match; hitEnd = false
No match; hitEnd = trueIt would seem that, with the case-insensitive flag set, hitEnd always returns true unless a match is found. Why is this? I find it quite confusing.
I can adjust my design to accomodate if this problem cannot be circumvented; however, I'd like to understand what has going wrong here. :)
Cheers! Thanks so much for all your help!

Using Airport Express for wireless printing and possibly streaming music

I have had the toughest time figuring out this Airport Express. It seems there are so many different ways to set it up. I've tried to read forums but just can't seem to wrap my head around what I need to do. I tried awhile back to join my network wirelessly but was having problems.
I don't really care about extending my current network. My internet service is through Verizon Fios and the router they provided works just fine and don't have any issues with connecting anywhere in the house. I bought the AE to be able to print wirelessly and stream music from my iMac in another room.
So to print wirelessly obviously the printer has to be plugged in to the AE, but does the AE have to be plugged into my router? Or can I have the AE anywhere in the house wherever the printer is? When I print, am I using my existing network or do I have to disconnect a computer from the wireless network and access a 2nd network to be able to print?
My first priority is to print wirelessly. If I can get it to work It'd be cool to stream music from my iMac. Obviously the AE needs to be where the speakers are, but again, does the AE have to plugged in to the router? And again, is this done through my existing network? Or do I have to stream music through a 2nd network? I apologize if i'm asking the same questions that have been asked in previous forums, I just haven't been successful thus far so wanted to see what response or tips I could get. Thanks.
My existing network has "WPA Personal" security set up on it if you need to know that.

but does the AE have to be plugged into my router? Or can I have the AE anywhere in the house wherever the printer is?
If you configure the Express correctly to "join" your FIOS wireless network, you can position it anywhere that it will receive a good, strong wireless signal.
The trick to setting the Express up to "join" is that you must choose exactly the same type of security for the Express as your main router is using. This is tricky when you are using devices from two different manufacturers because they often use different names for the same thing.
For example, when you say that the FIOS is setup to WPA Personal, we really need more information. There's usually a TKIP or AES associated with WPA. You have two choices on the Express for WPA settings, WPA2 Personal or WPA/WPA2 Personal. We can only guess which one might be the correct match for your FIOS network and if you don't choose the right setting, the Express cannot join the network and you have to start the configuration all over again from scratch and try the other setting.
Does your Fios have a setting for WPA2 Personal? Some manufacturers label this WPA2-PSK (AES). Or, maybe you find that your FIOS is using WPA-PSK (TKIP), which is the same thing as Apple WPA/WPA2 Personal. It's confusing. That's why we tell users to choose wireless gear from the same manufacturer. It's much easier when two devices talk the same language.
When I print, am I using my existing network or do I have to disconnect a computer from the wireless network and access a 2nd network to be able to print?
If you have a compatible printer plugged into the USB port on the AirPort Express and have "installed" the printer by setting it up, you will be able to print over your existing wireless network.
First things first. You need to get the Express setup to "join" correctly and get a green light. Then, tackle the printer setup.

Possible to use an expression for a property path?

Hello,
I've run into a problem. I want to use SetNumElements on an array, for which I'd like to vary the first "array" parameter based on an iteration of a loop. I want to increment the size of a different array for every iteration of a "for each" loop. The array which the forEach loop is iterating over contains the names of the arrays contained in Parameters. So I'm trying to use an expression to build the property path within the SetNumElements parameter, but it is complaining. My expression is:
SetNumElements("Parameters." + Locals.CurrentElement, GetNumElements("Parameters." + Locals.CurrentElement) + 1)
I get "expected array, found string" syntax error.
Is it possible to "build" the property name string in this function? I see the "evaluate" function, but that seems it will try to return the contents of the property, which I don't want. I just want to build the array name itself.
Thanks for any input.
David Jenkinson

Hello David,
It looks like you are evaluating a specific element (in this case that element is a string).
Here is a simple example of what I believe your overall objective is:
Parameters.Random is an array of numerics with 10 elements
Locals.String = "Random"
In my statement step I have:
SetNumElements(Evaluate("Parameters."+Locals.String), 1)
So essentially we must use evaluate when building an expression for the entire array, not just one element.
If the expression you want is contained in that array (ie if Parameters.StepTypesToSearchFor[1] = some string of the array ("locals.array") then you will need another Evaluate() function to evaluate that expression.
As an aside, this will only change the size at runtime, the variables (unless they are Station Globals) will return to the defaults when the execution is complete.
With warm regards,
David D.

Using Copy Express for transfering Chart Of Accounts

Can any one tell me how to use Copy Express Add-On
And also how to save the xml. file of exiting database template and upload into new database.
thanx in advance.

You can search for Copy Express in https://websmp208.sap-ag.de/smb/sbo/documentation page and there are PDF's, Online helps files, Recorded Webex sessions.
I am sure they would be helpful
Suda

Can I use Signal Express for multiple customers for only the one time $699?

How do I go about distributing Signal Expresss applications to multiple customers?

Hi Nutter,
Unlike LabVIEW, Signal Express doesn’t have any file distribution capabilities. If your application uses only basic features, you could install the free LE version of Signal Express on as many computers as necessary. If you need the full capabilities of Signal Express, however, you would need to purchase a license for each customer.
An alternative to paying for Signal Express for each customer deployment would be to generate LabVIEW code from the Signal Express project and create an executable. This process is described in the Knowledge Base articles Generate LabVIEW VIs from Signal Express and Deploying VIs generated in Signal Express. Note that this method requires that you have LabVIEW installed on your development computer with Application Builder capabilities.
Regards,
Message Edited by Luke G on 05-02-2007 12:23 PM
Luke
Applications Engineer
National Instruments

Using Airport Express for iTunes on a non-Apple router

In the past, we used a Microsoft wireless router, and all of the Airport Express stations worked great (we have 3). You can start up iTunes, and iTunes showed all three Airport stations in the popup at the bottom, allowing us to pipe our iTunes music to anywhere in the house.
The Microsoft router starting going bad (2 years old), and so we replaced it with a Linksys wireless router (the one that also supports a USB printer). The Linksys is working fine for printing on that USB printer from any computer in our LAN, and it provides all the LAN computers with internet connectivity; however, the Airport Express stations are flakey at best.
At first they didn't even work (aka, didn't show up in iTunes anymore). I ran Airport Admin and connected each one of them to the iMac directly to configure them. After configuring each one, they did start to show up in iTunes. I restored them to their original locations through out the house using wireless connectivity, and they did show up in iTunes and allowed music to play through. Unfortunately, after a day or two, they dropped off, and they never came back. We never had these kinds of headaches with the Microsoft router, so I'm wondering if there is some incompatibility with the Linksys and Airport Express, or if there is some configuration parameter on the Linksys that I need to tweek. Anyone have any ideas?

I have a similar issue with my Airport Express connected to a Linksys wired router (BEFSR41, the common Linksys 4-port router). My iMac is connected (wired) to one of the ports on the Linksys and the AP Express is connected to one of the other ports. Airport Admin on the iMac can't see it unless I manaully connect to it by specifying the IP address (having fixed its IP from my PowerBook via wireless) and (of course) iTunes on the iMac can't see it either.
I had an older generation BEFSR41 and this setup worked great, but they must have changed something. I can't seem to figure out how to disable whatever port-to-port (network jack to network jack on the router that is) that they have added the "blocks" Airport Admin utility from seeing it.
Airport Express Mac OS X (10.4.8) Aiport Express connected to a Linksys BEFSR41 wired router.

Using Solaris 11 Express for a multiprocessor CAD/CAM x86-64 system.

Similar Messages

Maybe you are looking for