Using Solution Database (IS01) in SolMan without TREX
Hi all,
I just wanted to use the solution database within SolMan, which comes with the standard CRM functionality (IS01). Unfortunately I always receive dumps when creating (SAPSQL_ARRAY_INSERT_DUPREC) and searching (OBJECTS_OBJREF_NOT_ASSIGNED_NO) for problems and solutions.
Afterwards I found that the installation of the TREX server is required and this is maybe the reason. Is this true?
How can I run the solution database without the installation of a TREX? Is this possible?
Please help.
Thank you very much in advance, and have a nice weekend.
Stefan Bauert
Hello Charan,
Thank you very much for your feedback!
I went through the wizard of TCode "CRMC_SAF_WZ_SE" and entered requested program, but I was leaving detailed data for http and so on blank.
After that I went to TCode "CRMC_SAF_ADV_CLIENT" and wanted to enter the recommended description to "Learning Enginge Description". The following 2 entries already exist:
DEFAULT_ASPR Spreading Activation
DEFAULT_PURE Pure Correlation
Do I need to enter a new entry, or just paste the program name into one of these entries?
However the creation of a problem is still failing with dump OBJECTS_OBJREF_NOT_ASSIGNED.
Finally my question: If I do not want to use the service desk for this, can I use the solution DB without TREX?
thanks and regards
stefan
Similar Messages
-
Error when using Solution database
dear all,
i have some problem when i using the solution database
we have abap runtime error :
Runtime Error RAISE_EXCEPTION
Exception condition "LEXICON_DOES_NOT_EXIST" raised.
<b> error analysis :</b>
A RAISE statement in the program "SAPLSRTV1" raised the exception
condition "LEXICON_DOES_NOT_EXIST".
Since the exception was not intercepted by a superior program in the hierarchy, processing was terminated.
thanks for your help
rgds
echoHi Echo:
Are you currently using the latest SP-Stack; I saw this error before and was due to a know issue in a old system.
Regards,
Federico -
Can I use Oralce9i database to depoly BC4J without using Ora9ias
Oralce9i database has so many components help you develop application, for example JSP,SERVLET,I want to know when I need oracle9ias for developing,in what case I only need oracle9i database for developing including its components?
Hi,
BC4J applications uses EJBs internally and starting from Oracle9i Release 2 Database EJBs are going to be desupported from database. EJBs can only be deployed in OC4J component of Oracle9iAS. Hence you need Oracle9iAS for deploying BC4J applications.If you want to work around it, write your code for Java Stored Procedures and EJBs.
It is very easy to wrap the EJB Framework around Java Stored Procedures. For design patterns it is even better, to
think in two Frameworks!
regards
Debu Panda
Oracle
Oralce9i database has so many components help you develop application, for example JSP,SERVLET,I want to know when I need oracle9ias for developing,in what case I only need oracle9i database for developing including its components?
Hey this won't change, because Oracle will support XML to stay firm against Microsoft .net.
We won't loose all the nice things!!!
Volker. -
Using mysql database on another machine without having mysql installed
Hi...
I was wondering whether its possible to copy a Mysql database that I have created on my machine, take it to another machine which does not have Mysql command line stuff installed and use my own JDBC connection to the copied mysql database and start manipulating my data. I don't know if this is possible or not ..
The main purpose of doing this is I am creating a Java program which uses a Mysql database and I want to know if I give it to someone else to use it do they have to install Mysql and all the package or can they simply start using it.
Thanks a lot
Sassanmasijade. wrote:
TuringPest wrote:
masijade. wrote:
Sasanpad wrote:
Hi...
I was wondering whether its possible to copy a Mysql database that I have created on my machine, take it to another machine which does not have Mysql command line stuff installed and use my own JDBC connection to the copied mysql database and start manipulating my data. I don't know if this is possible or not ..No. Not only would it be in violation of the terms of your license, but a MySQL database is a client/server type setup. No MySQL binaries, no server, your client (jdbc) cannot connect.im just curious because im new to mysql myself, but what do you mean that its a violation of his license?
do you mean for the commercial version?If he licenses his application under GPL, okay, no problem. Otherwise I read this quote
Free use for those who never copy, modify or distribute. As long as you never distribute the MySQL Software in any way, you are free to use it for powering your application, irrespective of whether your application is under GPL license or not.
to mean that you are not allowed to distribute MySQL (or any part of it, unless your application is GPL licensed) with your application, and if he distributes even just the data directory, he is distributing at least a part of MySQL.
Other's may not see it that way, but do you want to take the chance?The critical element is the word distribute. If he tries to embed MySQL in the application he is giving to his users, he's distributing it. Hence a violation of the license. That does not in any way prevent him from including scripts that when the application is installed goes out and runs the script on the user's installation of MySQL and builds the databases and whatnot his application needs on their MySQL installation.
Now, for the OP. If all you're keeping up with is urls and such and you don't have hundreds of them. I wouldn't bother with a db at all. a properties file would actually serve your purposes, and xml would suit just fine. Of course you'd have to have access to the file system and such but no licensing issues at all.
PS. -
Is TREX for a Solution Database mandantory
hey,
simple question:
do i need a TREX for the solution database?
or can i run the sol.db. without any TREX installation?
kind regard
dirkhello amit,
thanks for your quick answer.
but there are still some question-marks.
our plan is to use and fill the solution database in the first phase of our project.
and when we see, in three or six month, that we really need this, we will install trex.
so, can i use solution database without trex? when you say that without trex no search is possible - what is possible? see all solution database entries in a long list? or is it defently not possible to fill solution database with ta IS01 w/o trex?
i hope you can help.
thanks a lot and kind regards
dirk
Hello Dirk,
You would require TREX for the Solution Database. Without TREX, the search functionality would not work.
I hope this answers your query.
Regards
Amit -
Solution Database search option doesn't work
Hi,
Iu2019m working withSAP Solution Manager 7.0 (SID=SMG) is at SP 17.
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-
In
PI_BASIS 2006_1_700 0006 SAPKIPYM06 Basis Plug-In
(PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
SAP_AP 700 0013 SAPKNA7013 SAP Application Platform
BBPCRM 500 0012 SAPKU50012 BBPCRM
BI_CONT 703 0011 SAPKIBIIQ1 Business Intelligence Content
ST 400 0017 SAPKITL427 SAP Solution Manager Tool
CPRXRPM 400 0009 SAPK-40009INCPRXRPM SAP
xRPM/cProjects/cFolders 4.00 (ABAP)
ST-A/PI 01K_CRM560 0000 - Application Servicetools for
CRM 500 510
ST-ETP 100 0000 - Extended tracability package
ST-ICO 150_700 0015 SAPK-1507FINSTPL SAP Solution Manager
Implementation Cont
ST-SER 700_2008_1 0004 SAPKITLOO4 SAP Solution Manager
Service Tools
Service Desk is working, and I'd like use solution database option. So
I've done whole configurations and their work fine.
- I've created a support message logging at solman_workcenter
transaction.
- Using this support message and SAP Tutor delivered at
service.sap.com/rkt-solman I've created a solution database.
- I've logged at CRMC_SAF_TOOL TA->I've marked all checkbox->Check
button->goto->index
(http://solutionmanager.servicesap.grupotec.es:8002/sap
(bD1lcyZjPTAxMA==)/bc/bsp/sap/crm_ei_cmp_admn/default.htm) and I've
indexed the problem/solution just created following SAP Tutor.
- If I log on at is01 TA and I view the problem(24)/solution(500000000019)
just indexed
The problem is that when I'm at crm_dno_monitor TA->select a support
message(8000001233)->edit view->Transaction Data area->Solution
Database tab->
I press button "Search SDB"->so a popup opens "Problem Search Criteria"
titled->and I'm not able to find any results I type words(dump, mara,
table, reboot)
these words appear at problem/solution description, I type these word
at - with ANY of the words:, - with ALL of the words:, - WITHOUT the
words: but
I haven't hit at the search. At this same pop-up I fill Reference-
>Problem number field and I type: 24, a hilist appears with the
problem/solution just created but when I press button continue it
doesn't insert the hit at the support message solution database table.
I've followed SAP Note 331109 but transaction IS02 doesn't exists.
The service connection to Solution Manager is opened and access data
(user solmanadm) is maintained too.
Please, could you help me?
Thanks and Regards,
Raul.Problem solved using TA crm_saf_tool->index->check
-
CRM Solution database How to main the problems and solution types
Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinakerDear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit -
Problem facing in Solution Database in CS
Dear All,
I am using Solution database in notification link and for this i have maintained the symptoms and solutions master data and also compile them for the search engine.
While using solution database in notification, if I enter any word or any sentence in the search criteria in the free text box, then system display all the symptom related to that text but if I enter any Short form or any abbrevaition for example FFR(Field failure report) in the search criteria and this FFR is in one of the compiled symptom master data, even though it's not picking in the search criteria and system giving the message that "NO SEARCH CRITERIA EXISTS".
Please provide the solution asap.
Anupam Mittalcheck SAP Note 894884.
Hot deployment is not supported for KM development.
You better develop on another development portal where restarts do not affect the end users.
check these threads http://forums.sdn.sap.com/message.jspa?messageID=8283651
http://forums.sdn.sap.com/message.jspa?messageID=3548968
Regards
Mahesh -
Check Index Existence - Trex SOLMAN Solution Database Issue
Hi Experts,
I have done all the configuration part for having solution database functionality in SAP SOLMAN system. Our basis team has also installed TREX successfully.
But while checking in transaction CRMC_SAF_TOOL, everything is green except Check ndex Existence.
We are getting the below error messages:
Failed [Check=Index Existence ,Knowledge Base=SDB ,Language=E]
Failed [0 ]
Failed [No. of Documents=1-]
On discussion with Basis Team, I came to know that Indexes are getting created at putty level and while going to the indexes (Menu - Goto- Indexex (F8) in CRMC_SAF_TOOL, everything is seems to be fine and successful. No error there.
Please suggest where I am going wrong as I am still not able to search in IS02.
Thanks & Regards,
MadhuHello,
Sometimes this error is seen when an older version of Trex being used.
Are you on a current version of Trex? If not you may want to consider upgrading to a current version?
Additionally, sometimes documents saved via content management cannot be indexed,
as no url can be determined for them.
4. knowledgebase SDB_ATTACHMENT:
The URL's do not get determined and this is why nothing would be
put to TREX.
Herefore, please follow the following note:
685521 Logon data for /sap/bc/contentserver service
This may explain the HTTP:/no. DOcuments =1- error ???
So please ensure you have set the URL for the content server as per Note 685521
Regards,
Paul -
Does my solution database need a designated TREX
Hello all,
I'm about to setup a new SD environment for a client.
They want a solution database, and already have a few trex instances on their ECC environment.
So these are already in use.
Can I use these nonetheless for my Solution Database?
Or should I install a new one on my SolMan machine?
regards,
DavidHello David,
TREX can be installed directly on the Solution Manager system or externally from the Solution Manager system, much like the Solman BI can be installed locally or on a BW system.
I hope this answers your question.
Regards,
Paul -
Dear All,
We are configured Service desk and we are planing to maintain solution in solution database. my question is.
Is it required TREX software?
Thanks
SivaHi
yes you need it
Service Desk: Solution Database
check in above dolores blog
moreover if you are using solman 7.1 then you can use new functionality of solman knowledge articles far better web based message system
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
hope it helps
regards
prakhar -
Find long running database objects over week (without using V$ views)
find long running database objects over week (without using V$ views) as v$ views contains information only upto objects resides on main memory . I want to know the objects which takes highest time withing one week.
Hello,
welcome to the forum.
This is the forum for the tool {forum:id=260}. Your question about v$views should be posted in {forum:id=61} or {forum:id=75}. There is a FAQ {message:id=9360002}: especially the part about providing essential informations like 4 digit version number :-)
Regards
Marcus -
Creation of a symptom/problem in CRM.(Solution Database)
Hi All,
Can anybody tell me what are the mandatory parameters for creation of a symptom/problem in solution database.
I am using a bapi:
BAPI_SYMPTOM_CREATE
can anybody tell me what all fields need to be populate for successful creation of a symptom.
It would also be nice if you can throw some light on the use/documentation regarding this bapi.
I am verifying the creation of symptom in table ISMP.Since when i create a symptom through transaction: IS01 it gets created in ISMP table but not through my BAPI. Please help.
<b>Full points will be awarded.</b>
Thanks in advance.
ashish.Hi ,
u can create problem and solution in SDB,
by doing
Basic settings-->define number ranges (this is done by BASIS guys on SAF)
BASIC data filed is not required,
problems(prob type , prob subtype,define application area)
Solutions Solution type)
confugure this fields only ,
all the remaining fileds used to Activity, catalog Mgmt)
dont go with bapi's
u can use LSMW , this is better.
otherwise copy paste all the FAQ's manually in the system , and compile the Server for Delta compile, fullcompile, cluster compile,
Message was edited by:
kiran -
Service Desk - Solution Database - Solution retreival
I am trying to setup solution database for service desk.
1. I have set up TREX on the same host
2. Connected ABAP and TREX through a TCP/IP RFC
3. Completed configuration for the solution database using the available wizards
4. CRM_SAF_TOOL- all checks show greens
I am able to create a solution in a transaction using the "create solution in solution database" link.
My issue is:
When I go to another transaction and try to search for a available solution I do get get any results of the search. The short text used of both the transaction for which the solution was created and the transaction from which I am searching the SDB are the same.
What am I missing?
Thanks
ShabnaHad to generate the index.
-
Connection Timed Out error while saving messages in Solution Database
Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
BabuHi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas
Maybe you are looking for
-
Final Cut Pro X and glitches in 1080p HD video
When I use final cut pro X, the HD 1080p video I upload is extremely glitchy (video does not play smooth, audio issues). When I play these files in Quicktime, the glitches do not appear and the video runs smoothly. I have 16gb of RAM, 2.5 GHz Intel C
-
Hi, I am currently using Reports 6i (6.0.8.19.0). I have a problem, when a landscape report is run in the browser in pdf format, the report looks ok on the screen (ie full report is seen) but when I print the report its is printed on Portrait. It is
-
I have configured 5 gmail accounts, 3 yahoo accounts and 1 live account. Everything was working fine until a day came that I was forced to change the password of all my G accounts. I changed it in my phone also but since then I cant sync just 1 gmail
-
Hello all, I have been trying to upload a URL in my java application but I am always getting URL not reachable error message generating from a thrown exception. I know this may be easy but I am not able to find any solution for this is there a way to
-
Internal Profit (Between two/more Profit Centers)
Dear friends, My client has nearly 30 profit Centers (Each product/line) and final product of one profit center sya X is an in put of production process of another profit center say Y. Here problem is that Profit Center X wanted to claim some interna