Using Spaces With Logic 9?

Dear Apple,
I'd like to know if it's possible to use spaces together with Logic. I tried to grab my mixer and drag it to another space but that didn't work.
If it's not possible at all I would recommend this as a new feature in a Snow Leopard update.
Kind Regards,
Patrick

Dear Apple,
Hi Patrick,here's a user to user forum ,
I'd like to know if it's possible to use spaces together with Logic. I tried to grab my mixer and drag it to another space but that didn't work.
You can use Spaces with Logic,either drag the Mixer tab out or open a Mixer window in Logic Pro>Window>Mixer or press ⌘ +2 ,activate spaces and drag the Mixer window where you like.
A

Similar Messages

Cannot use Battery with Logic pro

An Know how to use battery2 with logic
because seems the logic au managerr can't find battery

hi
did you run the au validation programm? maybe if the validation crashed or didnt work you should update battery with the au hotfixes. battery 1 and 2 working for me since first installation.
if the registration of battery or other plug-ins expired they will also crash in the au manager.
best
marc

Using iRig with Logic X

Hi there, I've been trying to use my iRig to record with Logic X, but I can't get the audio input selector to show anything accept "built in input" when I have it plugged in.
Does anyone have any experience getting these two products to function together?
My computer is a brand new macbook pro, I'm told this should be doable.

Hi. I had the exact same problem. Spent a couple of hours last night playing around with various settings but all to no avail - nothing I did would show the iRig as an input device. Then tonight I was looking at the din end of the connection cable & noticed that 1 of the pins was bent. Got a knife & bent it back into position, plugged it in & voila - there was iRig showing as an input device. Hope this helps

Has anyone purchased this and is using it with Logic?

http://www.amazon.com/Samson-Track-Microphone-Audio-Interface/dp/B0015MJE22/ref= pdbbs5?ie=UTF8&s=musical-instruments&qid=1220851213&sr=8-5

Hi Freis,
I haven't used it, but according to it's pdf manual http://www.samsontech.com/products/relatedDocs/GM1UOM_5Lv1.pdf it is OS X compatible, so should work fine with Logic.
But...
Its' convertors are only 16b/48kHz. I would recommend 24b, especially with a condensor mic, since you get a much bigger dynamic range, much more subtlety in the recording, which is the whole point of these microphones to begin with. A good alternative for instance could be the +MXL 990+ with the +Emu Tracker Pre+ USB 24b/192kHz interface. But there is much choice, you need an interface with at least one XLR input with (48V) phantom power and 24 bits. It may cost you $30-50 more for the combi with mic, but that's absolutely worth it.
regards, Erik.

ImpOSCar - Anybody using this with Logic pro 8

I'm thinking of buying impOSCar to use with Logic. Is anybody here using this software synth? Any problems with multiple instances of the plugin? bugs / crashes etc? Demo seems to work just fine but just wanted to check before handing over the cash.

One of my favourite softsynths.
Be sure to also pick up my (and other) extra patches from GForceSoftware.com...
Works great in Logic.
And as a bonus, it's one of the synths that's had it's internal parameter specifically mapped for the Logic Control, so all the parameters are arranged in groups of 8, with all the related parameters together (so one group of 8 is OSC parameters, another is filter params, another is envelope params etc). This makes it one of the few synths that can quite comfortably be tweaked via a Mackie Control or anything using the same MCU protocol, and is a really nice attention to detail thing from the GForce chaps.
Highly recommended.

Using iControl with Logic Pro 8 - can you assign "undo" and "click on/off"?

Hi Guys
I know the M-Audio iControl works fine with Logic Pro 8 - the Logic 8 control surfaces manual has heaps of info on page 107 onwards about how to use the iControl.
Which is cool, because for simple remote tasks the iControl is brilliant. BUT I notice there are no "undo" or "click on/off" buttons on the iControl. Apparently (according to the control surfaces guide) you can assign different functions yourself.
Does anyone know if it's possible to assign these two features to say the "Option+Record" button and "Option+Cycle" buttons?
If anyone has any experience using the iControl with Logic, and personalising the controls, please let me know!
I have seen a cheap iControl and it might be a great solution rather than forking out for a Presonus Faderport or something more expensive...
Thanks heaps!
Mike

I've tried this (Mainstage) on both my home and mobile setups and there is one anomaly....
If I try to open a saved concert from the 'open recent concerts' menu item, nothing happens - However if I open a saved concert from the normal 'open' menu item, it all works as it should. Apart from that everything else 'just works'.
Obviously there is a variance between my findings and worshipvertical's, which is why I urge everyone to test for themselves to see what works and what does not.
If it works, great! You've saved a pot of money - If it does not work, I'm not sure I'd retain that much in the way of loyalty to the Logic platform, especially in view of the shorter and shorter enforced obsolescence periods that are now being forced upon us. Who knows where Apple is going next?
My opinions and findings, nothing more - or less
-Rob

Is anybody using macbook with logic pro ? impressions ??

anybody ?
or do you think its a good idea to run logic on it ?
thanks

cool
i tried using logic with pb 12"
but couldnt have any plug ins active when recording vocals or it records crackly.
th escreen sizeis no problem, coz i set up screen sets , so f1 for 12 vocal tracks, f2 for next 12, f3 for mixer part 1, etc
click of a button to see what you want big enough, i never really need to see all the tracks in one go
i would have thought the ibook would have more problems than the pb !
but maybe your studentis just using it for midi....
which takes no power lol....
anyone actually using a macbook with logic ?

Using Spaces with Shared Screen

I am using a shared screen to access my two other computers, and I really would love to be able to use Spaces to do this. One keystroke and I'm full screen on my other computer, how cool would that be. I just can't seem to do it. Spaces asks for the application, and to share a screen is not the application. Can anyone help?

Hi Leithh
If I understand correctly you're trying to use your own creations and add them to the existing palette available. I'm not sure why you would need to do this but if there is a way I don't know about it.
It may be something you could do if you went into the package contents of the application itself by holding Control and clicking on the application, this gives you the application folder basically. In here you will find the resources file which holds everything iMovie uses. If you can find the right place and save the right file you may be able to add it to the list of defaults.
JUST TO POINT OUT. IF YOU DON'T KNOW WHAT YOU ARE DOING IN HERE YOU RUN THE RISK OF SERIOUSLY SCREWING UP YOUR SOFTWARE AND AS SUCH I DO NOT RECOMMEND THIS.
It's something I used to do in Roxio Toast when I wanted a custom DVD Menu system to those on offer. It was a lot more obvious what was needed to be done though!
The best and safest thing you could do is store your self created clips in an event, call it something like Library and then just use them as you need to by dragging them into a project.
Cheers MDTE

How to use compressor with logic 7?

I'm trying to record an audio track using the compressor provided by logic. I know that I can insert a compressor to the audio track, but is my understanding that the audio is not compressed when recorded. Is this true? or is there a work around? Thanks

listen man
if you can afford an analog compressor then go for that
source---> tube pre-amp ---> ANALOG COMPRESSOR ----> mixer (for hardware monitoring if you want) ---> Interface
if you do get a compressor try something with a gate and a limiter built into it as well
1: limiter is good for setting a level where nothing will over pass that level
2: gate is a good idea incase you wanna get a good decent sound out of your Tube pre-amp without worrying about the low dirty sounds
you can use the gate to cut signals below some level, lets say you
Threshold : -50 dbu
Ratio : 2:1
Attack : 1 ms
Release : 1 sec ( depending on what you want)
Output : -3 db
this just a example of what i set for most of my clients, what is, is that i get them in about 30 mins before session and we do sound check plus mic positioning and settings for the PREAMP, COMPRESSOR AND LEVELS IN
doing all this means the singers / rappers will feel comfortable singing like they are on stage or in their bathroom
don't let an artist change for you if the artist is good and they happy with their style, position, volume and groove ( because the song will lack of taste and feel at the end)
tip: recording onto computer/ digital should not clip, you can make the tube as hot as you want but make sure you are about -3 db below clip
because sometimes good takes only comes once and distorting it and making the clients record about 80x will make the clients lose the feel
after recording good takes you can go on and compressor to your needs or gain to your needs
good tip : always make sure you get a good sound before recording or before hitting the disk, less time cutting and pasting more time creating other good things
and don't over compress with the analog compressor, always leave space for extra stuff just incase
stash
Message was edited by: $ta$h

Using Spaces with Audio Units?

I was trying to figure out if it is possible to have specific audio unit device displays in separate "spaces". It would be nice to have an entire screen designated for each window.
all i've tried so far is dragging the window, but it only seems to follow the space that garage band is displayed in.

Right now im actually using Ableton live rather than Garage band. In Live you are able to have the audio unit window open of the selected scene. when you scroll through your instruments, (if you have the AU edit window enabled) the different windows will pop up. i was trying to figure out a way to arm an instrument at the same time as viewing the AU via some sort of midi command (ie. arm track & ctrl+2 for my second space)
As far as i know, the audio units are the same no matter what host you use, so i thought i'd see if anyone here has figured it out.
also, does anyone know how to change the size of the AU window? all of mine are fixed at an awkward size.

Using Spaces with Multiple Displays

I'm wondering if there is a way to setup Spaces to only show spaces for the main display in a duel monitor setup.
I have a 19inch monitor I use when I'm at work and I do not enable mirroring so that I can get a higher resolution on the 19inch monitor than what my aging ibook (1024x768) can put out. When I do this and activate spaces, each space shows both monitors....the larger 19inch and then off the corner of that, the smaller 14 inch of my ibook.
What I want is for when I'm hooked up to my 19inch display, for my laptop display to in essence not exist. This way when I activate spaces (currently set to 4) I just get 4 "19 inch" spaces instead of, what looks like, 8 spaces.
Any thoughts? Any scripts or terminal commands to make this happen?

I put off upgrading to Leopard almost exclusively because of this reason... I thought I'd be able to get over it for a couple weeks until 10.5.2 comes out, but tonight I'm pulling my hair out.
Have you found out anything new?

Anyone using Spaces with MainStage

I've never enabled Spaces. However, to get some needed functionality to address missing features in MainStage (like no Sysex message sending), I'm thinking of running Bidule or Max while running MainStage. It would probably make sense to have them be in different virtual windows (which is my understand of what Spaces does) so wondering how well that works before I go to the trouble.

Just tried Spaces briefly. I discovered that if I put MainStage into fullscreen mode then I'm not able to switch to another space at all.
Bummer

Best drum loops for use with Logic? Ease of use, usability, etc.

Hi,
I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
Thanks

try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

Make it easier to use Blue Snowball mic with Logic

This post is intended for Apple to see. Perhaps this problem is fixed in Logic Pro/Express 7.2.
The Blue Snowball was designed for GarageBand and works great with it, right out of the box.
But trying to use it with Logic is like pulling teeth or debugging a Java program. 1. You have to create an Aggregate Device in Apple MIDI setup.
2. Once you do that, you still record blank audio tracks unless you read the forum posts really carefully and find out that you can use I/O slot Input 3 or Input 4 on the audio track you want to record with the Snowball. Once you do that you're OK.
My beef is that since Apple would love people to upgrade from GarageBand to Logic, and a few people will, and the Blue works great, right out of the box, with GB, your developers should figure out whether it's a relatively easy fix to make Logic Pro - and especially Express, the "logical" upgrade for most GB users - use the Blue Snowball right out of the box the minute they install Logic Express, Pro, or Logic Express Trial.
Dual G5 and PowerBook Mac OS X (10.4.4) 4GB RAM on Dual G5

I understand what you're saying about the "sound software principles", but you are probably an expert sound technician, and I'm not - yet. I have lots of learning to do. I come in as a musical person, a composer. I've also been a software developer at a "low" (i e industrial DP with Java, not C++ or Objective-C).
I'm speaking from the point of view of a customer at the Apple store. Say he's a newbie, like me. He (or she) gets GarageBand and then, noticing that it's featured item at the Apple store, gets a Blue Snowball.
A little later this person falls in love with digital music-making and downloads Logic Express Trial. Suddenly s/he finds that the Snowball records blank tracks. S/he complains, perhaps bitterly, to Apple or to her/his friendss about how this great microphone doesn't work with Logic. S/he is not used to reading forum posts, looking for FAQs, in short, doing all I had to do to find out how to make the Blue work.
It's not software, it's marketing, and usability. If there are good reasons not to change Logic, then at least Apple - and/or Blue - should have an FAQ or an insert in the documentation telling you what to do to make your Snowball record if you upgrade from GB to Logic. It's simply not customer-friendly! And some people who get Logic Express will never understand or care about the software design and technology. Neither Apple nor Blue wants annoyed customers. I happen not to be an annoyed customer only because I hunted through the forums and figured out what to do.. and it was -anything- but intuitive!
Dual G5 and PowerBook Mac OS X (10.4.3) 4GB RAM on Dual G5

Using a Tablet with Logic 8

I was just given a Bamboo Pen and Touch and tried using it with Logic 8. Unfortunately they just don't seem to be communicating correctly and I've found that I can only move the cursor with the pen poorly and I cannot click on anything. Using fingers on the touch pad is similarly buggy. Any chance Anyone has experience with this and nows of an update or driver for this problem? Thanks

JG99 wrote:
immo wrote:
JG99 wrote:
a bit unrelated i know. I'd wait to see what Apple announces later this month (rumored Touch/Tablet/giant iPhone). Something like that could potentially be an amazing controller for Logic and Final Cut.
JG
Sure ,and I'd love to have one(which i probably do when it comes out LOL) but definitely is not gonna cost the same as the Bamboo or replace my mouse that's not currently working
A
Message was edited by: immo
Good point. I saw the price for Bamboo pen and touch. Very cheap. You got me thinking now.
Found a good price at Amazon...I'm thinking that probably it won't let me do what my imagination believes I could...Draw the automation with the pen for example...LOL but maybe it could be possible.... why I can draw in Photoshop or Adobe products and not in Logic hehe
I saw this on YouTube which got me thinking of finding a cheap touchscreen instead
http://www.youtube.com/watch?v=-59BxTuHFio
JG
Just watched it ,it's great..but most of the good quality touch-screen monitors available are very expensive considering that the Tablet will be soon for sale and ....I can imagine the app developers will make amazing apps especially for that .If you find a good deal though give us a shout
A

Using Spaces With Logic 9?

Similar Messages

Maybe you are looking for