Using Splash screen WPA2 network
I was using Document 100787 as a guide.
1. I have 1252 & 1142 AP's connected to the Wism (6.0.188.0 code)
2. FWSM I have a 4402 (6.0.188.0 ) appliance connected as my anchor.
3. ACS is ver 4.2
All of my wireless networks function as expected. I see the successful auth in ACS. I just built a new WPA2 network and set it up to use Splash screen redirect. It doesn't seem to matter what I do it just wont work. IE or Mozilla.
Test 1 was to drop the users at the wism. There was no splash screen.
There was no evidence of my url-redirect in the wireshark trace.
Test 2 used the 4402 as my anchor point with the same results.
In both cases the client was authenticated and was able to navigate the internet and other duties. The problem is apon opening the broswer there is no redirect.
Any thoughts ?
I am not sure I understand what you are trying to accomplish. Typically you do not configure L2 encryption such as WPA/2 on web authentication SSIDs. This is because it is difficult to manage L2 encryption on networks intended for guest use or non domain users. If this SSID is for guest/non domain users I would use a PSK and provide that to end users if you need to use L2 encryption. If this is for domain users I would normally use 802.1x for authentication via EAP-TLS or PEAP.
Similar Messages
-
Illustrator crashes before splash screen with networked home dir
I’m having a problem with deploying Adobe CS6 in my school’s labs. Actually, this problem only affects Illustrator CS6 as all the other applications of the suite are functioning normally.
Here are some data about our network Environment
120+ imacs of various models (from late 2007 to early 2013)
Each mac is bound to 2 directory services (Windows AD and a Mac mini server)
Authentication is taken care of by the Windows AD server.
Preferences management and Mac-specific settings are controlled by the Mac server
Each user (teacher and student) has a remote home directory located on a huge (21 TB) synology NAS
The address of this home directory is maintained by the windows AD and retrieved at logon
Users can authenticate with no issues and their home directory is correctly mounted on the Imacs. The applications of the Creative suite (deployed through AAMEE) are all working fine except for Adobe Illustrator CS6.
Here is the problem
If a remote user (that is a user with a distant home directory, so pretty much everyone in the school) launches Illustrator, The application hangs and crashed even before this beautiful brownish splash screen appears on the screen. I can see illustrator in red in the activity monitor an have to kill it manually
If a local user logs in (that is the local admin or the guest user) Illustrator works fine! (Which tells me that it is not an install or dependency issue)
In short, It looks like Illustrator does not like users whose home directory is not stored on the local machine.
Has anyone run into a similar issue? Is this documented somewhere? Are there some preferences I need to customise to make Illustrator work with remote users? Will it be naturally solved when I’ll deploy Illustrator CC in a month or so?
In case any Adobe employee read this message, I attache the Crash report as generated by my iMac.
Any insight on this issue is very much appreciated. I’m stuck with this one...... heeeeeeelp!!
Thanks and regards from cloudy Belgium!I confirm what Serge said.
We worked on this issue with the Illustrator team and Illustrator just does not work when the home directory of the current user is not on the local drive.
That being said, it IS possible to make Illustrator work in a Network environment. There are 2 ways to do that.
1) when binding the MAc to an Active Directory domain, tick the "Force home directory on local drive" checkbox. That will create the home directory of the user on the local drive and Illustrator will work fine. The down side of this method is that if the user switches to another Mac (whith is the case in our school lab) his home directory will be re-created from scratch on the new Mac and all his custom preferences and setting will be lost.
2) Use the WorkGroup Manager to create a roaming profile. With this method, The home directory of the user is copied over from the network location on the local drive at logon. As far as Illustrator is concerned, The home folder is then local and everything works as expected. You can have the local home folder be synchronized with the remote home folder at logout (or even at regular intervals during the session) so that the custom preferences and settings of the user does follow him from Mac to Mac
The only case where Illustrator does not work is when the home directory is mounted as a remote folder. That configuration prevents Illustrator from openning.
Damien -
How to create a splash screen?
I was wondering how to create the splash screen that shows up when you just load the program. My program takes a bit to load, because it sets to change the look and feel to system dependent.
So, I want to have a splash screen like the one that eclipse uses to begin the program. How would I do it?
ThanksDid you search the forum using "splash screen" to find the other hundred threads that have asked this question before?
-
Excel 2013 stalling at splash screen for files in use by others
Excel 2013 is stalling (and not opening) when trying to open a file that is in use by another user. In office 2010 it would prompt the user to open in read-only mode, but in 2013 it seems to just stall and never open. It just stays on the splash screen
for ever. We have done some testing and it appears that double clicking on an excel file causes this to occur, but will function correctly if the file is opened through excel's file browser. Any suggestions on how to fix this? It's a pain to make
all the users open excel first, then browse through a lengthy network location. Thanks in advance!
For information purposes: these are files on a network location shared by many users.Hi,
Did the issue occur when you just installed the Office 2013 or after using Office 2013 sometimes? I recommend we try the following methods and test to check if they are helpful.
1. Click the File tab>Options>Advanced>scroll down to the General section>Clear the Ignore other applications that use Dynamic Data Exchange (DDE) check box in the General area.
2. Install the latest Cumulative Update for Excel
3. Right click on the Start Button>Click 'Open Windows Explorer'> click Organize > Layout> Uncheck Details Pane and Preview Pane.
On a Windows menu, click on Tools > Folder Options. In the box that opens up, click on the View tab. Scroll down the list to “Show pop-up description for folder and desktop items” and clear the checkbox and then click OK.
4. Check/Disable the Excel add-ins
5. Repair Office.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support -
Using an IPAD 2 running 5.0.1 is frequently shutting down in the middle of a variety of Apps and showing the Apple splash screen for several minutes. This happens occasionally at inopportune times. Once the splash screen clears it goes back to the logon screen and the App that was open is closed. Has anyone else encountered this? Is there a resolution?
RockHunter wrote:
This happens occasionally at inopportune times.
I don't think that there is ever a good time for this to occur.
What do you mean the Apple splash screen? You see the Apple logo on the screen?
It appears as though your apps are crashing. Have you tried quitting apps and restarting? Reset the iPad?
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Useful Code of the Day: Splash Screen & Busy Application
So you are making an Swing application. So what are two common things to do in it?
1) Display a splash screen.
2) Block user input when busy.
Enter AppFrame! It's a JFrame subclass which has a glass pane overlay option to block input (setBusy()). While "busy", it displays the system wait cursor.
It also supports display of a splash screen. There's a default splash screen if you don't provide a component to be the splash screen, and an initializer runner which takes a Runnable object. The Runnable object can then modify the splash screen component, for example to update a progress bar or text. See the main method for example usage.
It also has a method to center a component on another component (useful for dialogs) or center the component on the screen.
NOTE on setBusy: I do recall issues with the setBusy option to block input. I recall it having a problem on some Unix systems, but I can't remember the details offhand (sorry).
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
* <CODE>AppFrame</CODE> is a <CODE>javax.swing.JFrame</CODE> subclass that
* provides some convenient methods for applications. This class implements
* all the same constructors as <CODE>JFrame</CODE>, plus a few others.
* Methods exist to show the frame centered on the screen, display a splash
* screen, run an initializer thread and set the frame as "busy" to block
* user input.
public class AppFrame extends JFrame implements KeyListener, MouseListener {
* The splash screen window.
private JWindow splash = null;
* The busy state of the frame.
private boolean busy = false;
* The glass pane used when busy.
private Component glassPane = null;
* The original glass pane, which is reset when not busy.
private Component defaultGlassPane = null;
* Creates a new <CODE>AppFrame</CODE>.
public AppFrame() {
super();
init();
* Creates a new <CODE>AppFrame</CODE> with the specified
* <CODE>GraphicsConfiguration</CODE>.
* @param gc the GraphicsConfiguration of a screen device
public AppFrame(GraphicsConfiguration gc) {
super(gc);
init();
* Creates a new <CODE>AppFrame</CODE> with the specified title.
* @param title the title
public AppFrame(String title) {
super(title);
init();
* Creates a new <CODE>AppFrame</CODE> with the specified title and
* <CODE>GraphicsConfiguration</CODE>.
* @param title the title
* @param gc the GraphicsConfiguration of a screen device
public AppFrame(String title, GraphicsConfiguration gc) {
super(title, gc);
init();
* Creates a new <CODE>AppFrame</CODE> with the specified title and
* icon image.
* @param title the title
* @param icon the image icon
public AppFrame(String title, Image icon) {
super(title);
setIconImage(icon);
init();
* Creates a new <CODE>AppFrame</CODE> with the specified title and
* icon image.
* @param title the title
* @param icon the image icon
public AppFrame(String title, ImageIcon icon) {
this(title, icon.getImage());
* Initializes internal frame settings.
protected void init() {
// set default close operation (which will likely be changed later)
setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
// set up the glass pane
glassPane = new JPanel();
((JPanel)glassPane).setOpaque(false);
glassPane.addKeyListener(this);
glassPane.addMouseListener(this);
* Displays a new <CODE>JWindow</CODE> as a splash screen using the
* specified component as the content. The default size of the
* component will be used to size the splash screen. See the
* <CODE>showSplash(Component, int, int)</CODE> method description for
* more details.
* @param c the splash screen contents
* @return the window object
* @see #showSplash(Component, int, int)
* @see #hideSplash()
public JWindow showSplash(Component c) {
return showSplash(c, -1, -1);
* Displays a new <CODE>JWindow</CODE> as a splash screen using the
* specified component as the content. The component should have all
* the content it needs to display, like borders, images, text, etc.
* The splash screen is centered on monitor. If width and height are
* <CODE><= 0</CODE>, the default size of the component will be used
* to size the splash screen.
* <P>
* The window object is returned to allow the application to manipulate
* it, (such as move it or resize it, etc.). However, <B>do not</B>
* dispose the window directly. Instead, use <CODE>hideSplash()</CODE>
* to allow internal cleanup.
* <P>
* If the component is <CODE>null</CODE>, a default component with the
* frame title and icon will be created.
* <P>
* The splash screen window will be passed the same
* <CODE>GraphicsConfiguration</CODE> as this frame uses.
* @param c the splash screen contents
* @param w the splash screen width
* @param h the splash screen height
* @return the window object
* @see #showSplash(Component)
* @see #hideSplash()
public JWindow showSplash(Component c, int w, int h) {
// if a splash window was already created...
if(splash != null) {
// if it's showing, leave it; else null it
if(splash.isShowing()) {
return splash;
} else {
splash = null;
// if the component is null, then create a generic splash screen
// based on the frame title and icon
if(c == null) {
JPanel p = new JPanel();
p.setBorder(BorderFactory.createCompoundBorder(
BorderFactory.createRaisedBevelBorder(),
BorderFactory.createEmptyBorder(10, 10, 10, 10)
JLabel l = new JLabel("Loading application...");
if(getTitle() != null) {
l.setText("Loading " + getTitle() + "...");
if(getIconImage() != null) {
l.setIcon(new ImageIcon(getIconImage()));
p.add(l);
c = p;
splash = new JWindow(this, getGraphicsConfiguration());
splash.getContentPane().add(c);
splash.pack();
// set the splash screen size
if(w > 0 && h > 0) {
splash.setSize(w, h);
} else {
splash.setSize(c.getPreferredSize().width, c.getPreferredSize().height);
centerComponent(splash);
splash.show();
return splash;
* Disposes the splash window.
* @see #showSplash(Component, int, int)
* @see #showSplash(Component)
public void hideSplash() {
if(splash != null) {
splash.dispose();
splash = null;
* Runs an initializer <CODE>Runnable</CODE> object in a new thread.
* The initializer object should handle application initialization
* steps. A typical use would be:
* <OL>
* <LI>Create the frame.
* <LI>Create the splash screen component.
* <LI>Call <CODE>showSplash()</CODE> to display splash screen.
* <LI>Run the initializer, in which:
* <UL>
* <LI>Build the UI contents of the frame.
* <LI>Perform other initialization (load settings, data, etc.).
* <LI>Pack and show the frame.
* <LI>Call <CODE>hideSplash()</CODE>.
* </UL>
* </OL>
* <P>
* <B>NOTE:</B> Since this will be done in a new thread that is
* external to the event thread, any updates to the splash screen that
* might be done should be triggered through with
* <CODE>SwingUtilities.invokeAndWait(Runnable)</CODE>.
* @param r the <CODE>Runnable</CODE> initializer
public void runInitializer(Runnable r) {
Thread t = new Thread(r);
t.start();
* Shows the frame centered on the screen.
public void showCentered() {
centerComponent(this);
this.show();
* Checks the busy state.
* @return <CODE>true</CODE> if the frame is disabled;
* <CODE>false</CODE> if the frame is enabled
* @see #setBusy(boolean)
public boolean isBusy() {
return this.busy;
* Sets the busy state. When busy, the glasspane is shown which will
* consume all mouse and keyboard events, and a wait cursor is
* set for the frame.
* @param busy if <CODE>true</CODE>, disables frame;
* if <CODE>false</CODE>, enables frame
* @see #getBusy()
public void setBusy(boolean busy) {
// only set if changing
if(this.busy != busy) {
this.busy = busy;
// If busy, keep current glass pane to put back when not
// busy. This is done in case the application is using
// it's own glass pane for something special.
if(busy) {
defaultGlassPane = getGlassPane();
setGlassPane(glassPane);
} else {
setGlassPane(defaultGlassPane);
defaultGlassPane = null;
glassPane.setVisible(busy);
glassPane.setCursor(busy ?
Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR) :
Cursor.getDefaultCursor()
setCursor(glassPane.getCursor());
* Handle key typed events. Consumes the event for the glasspane
* when the frame is busy.
* @param ke the key event
public void keyTyped(KeyEvent ke) {
ke.consume();
* Handle key released events. Consumes the event for the glasspane
* when the frame is busy.
* @param ke the key event
public void keyReleased(KeyEvent ke) {
ke.consume();
* Handle key pressed events. Consumes the event for the glasspane
* when the frame is busy.
* @param ke the key event
public void keyPressed(KeyEvent ke) {
ke.consume();
* Handle mouse clicked events. Consumes the event for the glasspane
* when the frame is busy.
* @param me the mouse event
public void mouseClicked(MouseEvent me) {
me.consume();
* Handle mouse entered events. Consumes the event for the glasspane
* when the frame is busy.
* @param me the mouse event
public void mouseEntered(MouseEvent me) {
me.consume();
* Handle mouse exited events. Consumes the event for the glasspane
* when the frame is busy.
* @param me the mouse event
public void mouseExited(MouseEvent me) {
me.consume();
* Handle mouse pressed events. Consumes the event for the glasspane
* when the frame is busy.
* @param me the mouse event
public void mousePressed(MouseEvent me) {
me.consume();
* Handle mouse released events. Consumes the event for the glasspane
* when the frame is busy.
* @param me the mouse event
public void mouseReleased(MouseEvent me) {
me.consume();
* Centers the component <CODE>c</CODE> on the screen.
* @param c the component to center
* @see #centerComponent(Component, Component)
public static void centerComponent(Component c) {
centerComponent(c, null);
* Centers the component <CODE>c</CODE> on component <CODE>p</CODE>.
* If <CODE>p</CODE> is null, the component <CODE>c</CODE> will be
* centered on the screen.
* @param c the component to center
* @param p the parent component to center on or null for screen
* @see #centerComponent(Component)
public static void centerComponent(Component c, Component p) {
if(c != null) {
Dimension d = (p != null ? p.getSize() :
Toolkit.getDefaultToolkit().getScreenSize()
c.setLocation(
Math.max(0, (d.getSize().width/2) - (c.getSize().width/2)),
Math.max(0, (d.getSize().height/2) - (c.getSize().height/2))
* Main method. Used for testing.
* @param args the arguments
public static void main(String[] args) {
final AppFrame f = new AppFrame("Test Application",
new ImageIcon("center.gif"));
f.showSplash(null);
f.runInitializer(new Runnable() {
public void run() {
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(new JButton("this is a frame"));
f.pack();
f.setSize(300, 400);
try {
Thread.currentThread().sleep(3000);
} catch(Exception e) {}
f.showCentered();
f.setBusy(true);
try {
Thread.currentThread().sleep(100);
} catch(Exception e) {}
f.hideSplash();
try {
Thread.currentThread().sleep(3000);
} catch(Exception e) {}
f.setBusy(false);
"Useful Code of the Day" is supplied by the person who posted this message. This code is not guaranteed by any warranty whatsoever. The code is free to use and modify as you see fit. The code was tested and worked for the author. If anyone else has some useful code, feel free to post it under this heading.Hi
Thanks fo this piece of code. This one really help me
Deepa -
Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L
Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
SergiuszSame issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben. -
Custom splash screen only shows up when command line is used...
Hi,
Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
Thanks...
My jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="6.0+" href="AcSent.jnlp">
<information>
<title>AcSent : Commande de repas</title>
<description>AcSent - Commande de repas</description>
<vendor>AcSent</vendor>
<homepage href="http://www.xxx.eu" />
<icon href="acSentIconBiseau.png" />
<icon href="splashAcSentRC.png" kind="splash" />
<shortcut online="true">
<desktop />
<menu submenu="AcSent" />
</shortcut>
</information>
<security>
<all-permissions />
</security>
<resources>
<j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
<jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
<jar href="AcSentJnlp.jar" main="true" version="1.0" />
<property name="jnlp.packEnabled" value="true" />
<property name="jnlp.versionEnabled" value="true" />
</resources>
<application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
progress-class="eu.acsent.jnlp.progressindicator.CustomProgress">
</application-desc>
</jnlp>Hi again,
I made some researches :
- The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
- This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
Thanks again... -
How can i create splash screen using netbean?
how can i create splash screen using netbean?
Welcome to the Sun forums.
gabbyndu wrote:
how can i create splash screen..Java 6 offers a splashscreen functionality. See [New Splash-Screen Functionality in Java SE 6|http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/] *(<- link)* for details.
[Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] has offered splash screens to applications since Java 1.2. See [How can I provide my own splash screen?|http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206] in the JWS FAQ for more details.
.. using netbean?We don't support Netbeans here. Ask that on a [Netbeans forum|http://forums.netbeans.org/]. -
Removing Splash Screen using button in Movieclip
Hi
I have created a shooting game and I am struggling to create a splash screen at the beginning informing the user of
the controls with a button to start the game, which removes the splash screen. I am trying to add the splash screen in the main timeline
using addChild event. I can get the splash screen to appear on the game and remove it when the playgame button is pressed, but this
prevents all the other event listeners so I am not able to fire or move the ship.
In the splash screen I have the code :
Play_btn.addEventListener(MouseEvent.CLICK,playgame)
function playgame(e:Event):void
Play_btn.removeEventListener(MouseEvent.CLICK,playgame)
parent.removeChild(this);
and in the main timeline I have :
addChild(splashscreen);
Can anyone give me some guidance, thanks for reading thisHi
thanks for taking the time, I don't know how to upload the fla so here is my code.
The code in the splashscreen MovieClip, which has a button called Play_btn is :
Play_btn.addEventListener(MouseEvent.CLICK,playgame);
function playgame(e:Event):void
parent.removeChild(this);
Play_btn.removeEventListener(MouseEvent.CLICK,playgame)
and the code in the main timeline is :
//import some important flash libraries.
import flash.events.KeyboardEvent;
import flash.events.Event;
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.sampler.Sample;
var score:Number=0;
var countCollisions:Number =0;
var astArray:Array = new Array();
var enemyshipArray = new Array();
var enemybulletArray = new Array();
var explosionArray = new Array()
var speed:Number = 10;
var key_left:Boolean = false;
var key_right:Boolean = false;
var key_up:Boolean = false;
var key_down:Boolean = false;
var key_space:Boolean = false;
var shootLimiter:Number=0;
var splashscreen:MovieClip = new Splash();
//Play_btn.addEventListener(MouseEvent.CLICK,playgame);
splashscreen.x = 0;
splashscreen.y = 0;
addChild(splashscreen);
//removeChild(splashscreen);
background.addEventListener(Event.ENTER_FRAME,backgroundmove);
function backgroundmove(e:Event):void
background.x -= 1;
if(background.x < -200)
background.x = 749.95;
this is how you can comment over a number
of different lines
var timer:Timer = new Timer(1000, 10);
timer.addEventListener(TimerEvent.TIMER, AddAsteroid);
timer.start();
var timerenemyship:Timer = new Timer(2000, 10);
timerenemyship.addEventListener(TimerEvent.TIMER, Addenemyship);
timerenemyship.start();
stage.addEventListener(KeyboardEvent.KEY_DOWN,KeyDown);
stage.addEventListener(KeyboardEvent.KEY_UP,KeyUp);
var ship:MovieClip = new Ship()
var enemyship:MovieClip = new EnemyShip()
addChild(ship);
function Addenemyship(e:TimerEvent):void
var enemybullettimer:Timer = new Timer(2000, 10);
enemybullettimer.addEventListener(TimerEvent.TIMER, Addenemybullet);
var enemyship:MovieClip = new EnemyShip();
enemyship.x = 800;
enemyship.y = Math.round(Math.random()*400);
enemyshipArray.push(enemyship);
addChild(enemyship);
enemybullettimer.start();
function Addenemybullet(e:TimerEvent):void
var enemybullet:MovieClip = new EnemyBullet();
enemybullet.x = enemyship.x+50;
enemybullet.y = enemyship.y+50;
enemybulletArray.push(enemybullet);
addChild(enemybullet);
enemybullet.addEventListener(Event.ENTER_FRAME,moveenemybullet);
function moveenemybullet(e:Event):void
enemybullet.x -=30;
if(enemybullet.hitTestObject(ship))
removeChild(ship);
enemyship.addEventListener(Event.ENTER_FRAME,enemyshipmove);
function enemyshipmove(e:Event):void
enemyship.x -=10;
for(var i=0; i<enemyshipArray.length; i++)
if(enemyshipArray[i].hitTestObject(ship))
// EXPLOSION
var explosion:MovieClip = new Explosion();
addChild(explosion);
explosion.x =ship.x;
explosion.y = ship.y;
explosionArray.push(explosion);
for (var l:int=0; l<explosionArray.length; l++)
if (explosionArray[l].currentFrame == 10)
removeChild(explosionArray[l]);
explosionArray.splice(l,1);
// END OF EXPLOSION
MovieClip(enemyshipArray[i]).removeEventListener(Event.ENTER_FRAME, enemyshipmove);
removeChild(enemyshipArray[i]);
enemyshipArray.splice(i, 1);
countCollisions++;
if(countCollisions >= 2)
ship.gotoAndPlay(87);
else
ship.gotoAndPlay(6);
function AddAsteroid(e:TimerEvent):void
var asteroid:MovieClip = new Asteroid();
asteroid.x = 800;
asteroid.y = Math.round(Math.random()*700);
astArray.push(asteroid);
addChild(asteroid);
asteroid.addEventListener(Event.ENTER_FRAME,asteroidmove);
function asteroidmove(e:Event):void
asteroid.x--
for(var i=0; i<astArray.length; i++)
if(astArray[i].hitTestObject(ship))
MovieClip(astArray[i]).removeEventListener(Event.ENTER_FRAME, asteroidmove);
removeChild(astArray[i]);
astArray.splice(i, 1);
countCollisions++;
if(countCollisions >= 4)
ship.gotoAndPlay(87);
//removeChild(ship);
else
ship.gotoAndPlay(6);
addEventListener(Event.ENTER_FRAME,Main);
function Main(event:Event)
CheckKeys();
function KeyDown(event:KeyboardEvent)
if(event.keyCode == 37){ //checks if left arrowkey is pressed.
key_left = true;
if(event.keyCode == 39){ //checks if right arrowkey is pressed.
key_right = true;
if(event.keyCode == 38){ //checks if up arrowkey is pressed.
key_up = true;
if(event.keyCode == 40){ //checks if down arrowkey is pressed.
key_down = true;
if(event.keyCode == 32){ //checks if down arrowkey is pressed.
key_space = true;
function KeyUp(event:KeyboardEvent){
if(event.keyCode == 37){ //checks if left arrowkey is released.
key_left = false;
if(event.keyCode == 39){ //checks if right arrowkey is released.
key_right = false;
if(event.keyCode == 38){ //checks if up arrowkey is released.
key_up = false;
if(event.keyCode == 40){ //checks if down arrowkey is released.
key_down = false;
if(event.keyCode == 32){ //checks if down arrowkey is released.
key_space = false;
function CheckKeys()
shootLimiter += 1;
if(key_left)
setDirection(1);
ship.x -= 5;
if(key_right)
setDirection(0);
ship.x += 5;
if(key_up){
ship.y -= 5;
if(key_down){
ship.y += 5;
if((key_space) && (shootLimiter > 8))
shootLimiter = 0;
var b = new Bullet();
addChild(b);
// ADD SOUND
var bulletsound:Sound=new SoundEnemyShot()
bulletsound.play();
// END SOUND
b.x = ship.x + 50;
b.y = ship.y + 3;
addEventListener(Event.ENTER_FRAME,moveBullet);
function moveBullet(e:Event):void
b.x +=10;
if(b.x > 600)
if(contains(b))
removeChild(b);
removeEventListener(Event.ENTER_FRAME,moveBullet);
for(var i=0; i<astArray.length; i++)
if(astArray[i].hitTestObject(b))
removeChild(b);
removeChild(astArray[i]);
score +=10;
score_txt.text = score.toString() ;
removeEventListener(Event.ENTER_FRAME,moveBullet);
for(var i=0; i<enemyshipArray.length; i++)
if(enemyshipArray[i].hitTestObject(b))
removeChild(b);
removeChild(enemyshipArray[i]);
enemyshipArray.splice(i, 1);
MovieClip(enemyshipArray[i]).removeEventListener(Event.ENTER_FRAME, moveBullet);
function setDirection(param) {
if (param == 0) {
ship.scaleX = 1;
} else {
ship.scaleX = -1; -
Multiple logons using same Logon Manager Splash Screen
I have an web application set up in Logon Manager where the user profile is set to login as a simple user with matching credentials. I also want the person to login to the same web page at the same login splash screen using different credentials as administrator. Can this be done. I am new to this so all help id welcomed.
Many questions, many answers. :-)
Yes, Rich, they would need to install the multiserver version
for you to see that Enterprise Manager option in the CF Admin. But
no, they would not need to uninstall the Server deployment (what
you did) to add the Multiserver deployment. They can co-exist
(though it's not something most would typically do).
The best news for you is that, yes, they can indeed just
setup a second site on their web server, and have that also point
to the one CF Server deployment you have installed. That is, of
course, assuming they run a web server that supports multiple
sites. If it's Apache, you're good. If it's Windows, then as long
as its Windows Server 2003 (or 2008, or Vista), you're good, too.
(Just for completeness, for other readers, XP does not let you run
more than one site at a time.)
If during the installation of CF you told it to have ALL
sites in the web server run with CF, you need do nothing more than
create the new site. It should immediately be able to run CF pages.
If instead you told it to only link CF to one site, then you'll
need to run the web server configuration tool again. You can do
that manually, even after the installation. See the CF Admin and
Config docs for more on that, as well as on this very question. (I
realize many like to just run stuff and hope that the interface is
clear enough, but as this question shows, for some things anyone
installing CF will be well-served by looking over that often-missed
manual.)
Hope that helps, Rich. It's not an RTFM answer. :-) Just
saying that if you need more than what I've said, it is in the
manual. Still, I'll be happy to answer follow ups if I can. -
When using Teststand, how do I prevent the LABView splash screen from appearing?
It comes up even if I have the "Don't show this screen" checked !
I'm excited to see TestStand is a celbrity product.
Typically when you run a sequence in TestStand, LabVIEW is launched by TestStand when the sequence contains steps that use the LV adapter. In this case LV is launched through its ActiveX interface and the LV splash screen is suppressed. This is in contrast to launching LabVIEW manually in which case the LV splash screen will be displayed.
In your case I'm not sure how LV is being launched. You might want to shut down LV and then run your sequence to see if the splash screen is then suppressed.
You may also want to read NI Knowledgebase article 28MEPUXL, "Why Does the LabVIEW Startup Screen Appear When Using the Dialog Box Function from Within My VI?". In this case LV has been opened manually and not be Test
Stand, such that the splash screen is not suppressed. -
Please help!
After installing iTunes 11.0.1 I got a splash screen that appears after all updates. The screen reads:
System extension cannot be used
"The system extension “/System/Library/Extensions/PulseDriver.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update."
Question: How do I re-install or replace this file?
JimI submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim -
HI ,
i had crated a splash screen using JWindow and made
JWindow.setVisible(true); during the loading time and then made
Jwindow.dispose(); after it gets loaded...
but it is not working a only a blank window is visible not its contents....what's wronghi!
import java.awt.Color;
import java.awt.Insets;
import javax.swing.JLabel;
import javax.swing.JWindow;
import javax.swing.border.LineBorder;
* @author : aniruddha<br>
* @date : Nov 22, 2006, 11:43:43 AM<br>
* @source : TestJwindow.java<br>
* @project : HelpForum<br>
* @author aniruddha
public class TestJwindow
public static void main(String[] args)
JWindow loadWindow = new JWindow();
JLabel lblLoad = new JLabel(" Loading..........");
if(loadWindow.isVisible())
loadWindow.dispose();
else
loadWindow.getContentPane().setBackground(Color.gray);
lblLoad.setBorder(new LineBorder(Color.red, 3));
lblLoad.setForeground(Color.white);
loadWindow.add(lblLoad);
loadWindow.setSize(150, 50);
loadWindow.setLocationRelativeTo(null);
loadWindow.setVisible(true);
}works fine with me..
:) -
To display splash screen for certian period of time using threads
i want to write a program to display splash screen for certian period of time using threads. could some one help me
If you just want a splash screen: [http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/|http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/]
If you want to learn threads: [http://java.sun.com/docs/books/tutorial/essential/concurrency/|http://java.sun.com/docs/books/tutorial/essential/concurrency/]
Maybe you are looking for
-
Script running in the background and buffer overflow
Hi, I have written a script that is supposed to be a background process, which will check every 5 minutes if given person is logged in on Skype. The script does it basic job (alters me when given person is on Skype) but when I try to quit it (see cod
-
Query SQL database with Crystal
I have a crystal report that is a production work order from our ERP system Macola ES. The user enters the work order in Macola then prints it. The user will input a work order number and the report will populate multiple fields from that work orde
-
Bugs in my n85 in firmware v11 (and beyond n85)
error in the radio transmitter in certain applications only restarts fails with the effects of the item does not work fast gravel when a high-quality video on a TV in occasions not reproduce lacks refine the firmware but hopefully soon a new firm
-
Sir in material material master ( MM03 ) accounting view we mention price of material , there my system is showing me price in 70.000,000 format , means if i want seventy thousand then after 70 one fullstop appears and in place of fullstop comma appe
-
Button display problem in APEX!!
Hi All, I have created two buttons as mentioned below for both buttons# Now i need to display both buttons side by side. Currently it is diplaying one after the other. How we can achieve this#. Button Style#Template based button Button region#Left Bu