Using SRM for very large contracts and contract management
We are doing an SRM 7.01 implementation project. SRM will be used primarily for outsourced contract management. The contracts are all services associated with facilitites (plant) maintenance and also support services like cleaning or catering.
They have very large numbers of items priced individually (e.g. 10,000) per contract. The items price depends on the location the work is expected to be performed. The location is represented in SAP RE-FX architectual object. The price can be priced at any level of the hierarchy e.g. service A is priced the same across the whole state but service B is priced per campus.
q1. SAP advises that there are performance limitations on SRM contracts >2000 lines. Has anyone experience in a solution to provide very large contracts in SRM? How did you do it please?
q2. SAP advises to use the plant to represent the location for pricing purposes, but this would result in a very large number of plants. Has any one experience in alternative solutions to for variable location pricing in SRM contracts please? I.e. like integrating the RE-FX architectural object or similar into contract and PO line items.
thanks very much
Hi Prakash,
SRM does provide the facility of contract management with the help of Purchase Contracts and Global Outline Agreements but it is used as part of the sourcing for materials and services. The materials or services have contracts against some given target value against which PO is released. The contract is based on a material number ( eithe material or a service) which will be used as a source of supply during the creation of the Shopping Cart. It might not really fit in the scenario of carrier and freight forwarders but still can be customized for this kind of use.
The contract management functionalities in the R/3 space can also be looked on for this purpose.
Reg
Sachin
Similar Messages
-
Best Practice for very large itunes and photo library..using Os X Server
Ok setup....
one Imac, one new Macbook Pro, one Macbook, all on leopard. Wired and wireless, all airport extremes and express'
have purchased a mac mini plus a firewire 800 2TB Raid drive.
I have a 190GB ever increasing music library (I rip one to one no compression) and a 300gb photo library.
So..question Will it be easier to set up OS X Server on the mini and access my itunes library via that?
Is it easy to do so?
I only rip via the Imac, so the library is connected to that and shared to the laptops...how does one go about making the imac automatically connect to the music if i transfer all music to the server ?
The photo bit can wait depending on the answer to the music..
many thanks
AdrianI have a much larger itunes collection (500gb/ 300k songs, a lot more photos, and several terabytes of movies). I share them out via a linux server. We use apple TV for music/video and the bottleneck appears to be the mac running itunes in the middle. I have all of the laptops (macbook pros) set up with their own "instance" of itunes that just references the files on the server. You can enable sharing on itunes itself, but with a library this size performance on things like loading cover art and browsing the library is not great. Please note also I haven't tried 8.x so there may be some performance enhancements that have improved things.
There is a lag on accessing music/video on the server of a second or so. I suspect that this is due to speed in the mac accessing the network shares, but it's not bad and you never know it once the music starts or the video starts. Some of this on the video front may be the codec settings I used to encode the video.
I suspect that as long as you are doing just music, this isn't going to be an issue for you with a mini. I also suspect that you don't need OSX server at all. You can just do a file share in OSX and give each machine a local itunes instance pointing back at the files on the server and have a good setup. -
I want to use Firefox for a specific webpage and Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox
I thought my response was clear, but to reiterate:
1. 10.5.1.42
2. None, nada, zero, zilch. I have no iPhone account with any carrier. There is a deactivated ATT sim card in the3 phone. Someone gave it to me. I only want to use it as an iPod Touch.
3. PC with Windows 7 (I can offer more detailed info, but I am not sure how that would help.
I had already read that link. Reset did not resolve (both hard and soft) -
How can we suggest a new DBA OCE certification for very large databases?
How can we suggest a new DBA OCE certification for very large databases?
What web site, or what phone number can we call to suggest creating a VLDB OCE certification.
The largest databases that I have ever worked with barely over 1 Trillion Bytes.
Some people told me that the results of being a DBA totally change when you have a VERY LARGE DATABASE.
I could guess that maybe some of the following topics of how to configure might be on it,
* Partitioning
* parallel
* bigger block size - DSS vs OLTP
* etc
Where could I send in a recommendation?
Thanks RogerI wish there were some details about the OCE data warehousing.
Look at the topics for 1Z0-515. Assume that the 'lightweight' topics will go (like Best Practices) and that there will be more technical topics added.
Oracle Database 11g Data Warehousing Essentials | Oracle Certification Exam
Overview of Data Warehousing
Describe the benefits of a data warehouse
Describe the technical characteristics of a data warehouse
Describe the Oracle Database structures used primarily by a data warehouse
Explain the use of materialized views
Implement Database Resource Manager to control resource usage
Identify and explain the benefits provided by standard Oracle Database 11g enhancements for a data warehouse
Parallelism
Explain how the Oracle optimizer determines the degree of parallelism
Configure parallelism
Explain how parallelism and partitioning work together
Partitioning
Describe types of partitioning
Describe the benefits of partitioning
Implement partition-wise joins
Result Cache
Describe how the SQL Result Cache operates
Identify the scenarios which benefit the most from Result Set Caching
OLAP
Explain how Oracle OLAP delivers high performance
Describe how applications can access data stored in Oracle OLAP cubes
Advanced Compression
Explain the benefits provided by Advanced Compression
Explain how Advanced Compression operates
Describe how Advanced Compression interacts with other Oracle options and utilities
Data integration
Explain Oracle's overall approach to data integration
Describe the benefits provided by ODI
Differentiate the components of ODI
Create integration data flows with ODI
Ensure data quality with OWB
Explain the concept and use of real-time data integration
Describe the architecture of Oracle's data integration solutions
Data mining and analysis
Describe the components of Oracle's Data Mining option
Describe the analytical functions provided by Oracle Data Mining
Identify use cases that can benefit from Oracle Data Mining
Identify which Oracle products use Oracle Data Mining
Sizing
Properly size all resources to be used in a data warehouse configuration
Exadata
Describe the architecture of the Sun Oracle Database Machine
Describe configuration options for an Exadata Storage Server
Explain the advantages provided by the Exadata Storage Server
Best practices for performance
Employ best practices to load incremental data into a data warehouse
Employ best practices for using Oracle features to implement high performance data warehouses -
What are the advantages and disadvantages for the larger blocksize and for
What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?
Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks. -
I have been using itunes for 6 years now, and was listening to my music the other day and noticed that some of my albums songs were stopping short of finishing. They just stop and go to the next song. Any solutions?
I have experienced the same problem on my my iPad1, my former iPhone 4 my laptop and even my new iPhone5 though I had really hoped that the new phone and IOS would solve the problem. About 5% of the songs are affected and the stoppage can range from seconds short to a minute and a half. The file shows more of the music left, but it stops playing and goes to the next song. Very aggravating. Appears to happen on purchased and uploaded music.
Any help Apple? -
Grid Control Architecture for Very Large Sites: New Article published
A new article on Grid Control was published recently:
Grid Control Architecture for Very Large Sites
http://www.oracle.com/technology/pub/articles/havewala-gridcontrol.htmlOliver,
Thanks for the comments. The article is based on practical experience. If one was to recommend a pool of 2 management servers for a large corporate with 1000 servers, what that would mean is that if 1 server was brought down for any maintenance reason (for eg. applying an EM patch), all the EM work load would be on the remaining management server. So it is better to have 3 management servers instead of 2 when the EM system is servicing so many targets. Otherwise, the DBAs would be a tad angry since only 1 remaining managment server would not be able to service them properly during the time of the maintainance fix on the first management server.
The article ends with these words: "You can easily manage hundreds or even *thousands* of targets with such an architecture. The large corporate which had deployed this project scaled easily up to managing 600 to 700 targets with a pool of just three management servers, and the future plan is to manage *2,000 or more* targets which is quite achievable." The 2000 or more is based on the same architecture of 3 managment servers.
So as per the best practice document, 2 management servers would be fine for 1000 servers, although I would still advise 3 servers in practice.
For your case of 200 servers, it depends on the level of monitoring you are planning to do, and the type of database managment activities that
will be done by the DBAs. For eg, if the Dbas are planning on creating standby databases now and then through Grid Control, running backups daily
via Grid Control, cloning databases in Grid Control, patching databases in Grid Control and so on, I would definitely advise a pool of 2 servers
in your case. 2 is always better than 1.
Regards,
Porus.
Edited by: Porushh on Feb 21, 2009 12:51 AM -
I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?
You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’. -
I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?
The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David -
I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????
Go to settings/notification centre and make sure today vie and calendar day view are both on
-
When i use language for non-unicode [Russian] and i insert another language
when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
Thank you for help.My English is not good,Sorrythat is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file. -
i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do
You need to move the music from the iPod to your iTunes library on your computer then sync with the iPhone.
Assuming you have a PC you can use this: http://www.yamipod.com/main/modules/home/ -
my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme
No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking. -
I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff I don't use. Any advice on what to buy?
Well, there is a whole world of free or affordable software out there like GIMP, PDPaint and similar. Otherwise if you want to stick with Adobe stuff signing up for the CC photography program would be the most cost-efficient way...
Mylenium -
I'm going to be a freshmen in college soon and don't know what laptop I should buy. What do I need to look for? I will be mainly using it for typing essays, research, and music.
You should contact the department of studies at the school and ask what types of application that you might have to use. If there are Windows based ones, then you may have to consider installing Windows in your MBA or get a PC. This could have an influence on the amount of storage the MBA should have.
Ciao.
Maybe you are looking for
-
HT201342 can i use a gmail account with iCloud
How can I receive emails from a gmail account on my icloud email server
-
How do I split pages in a journal in iPhoto on the iPad?
How do I split pages in a journal in iPhoto on the iPad?
-
Action doesn't work if getFocusOwner() is null
i have JInternalFrame with toolbar with three buttons with defined actions (insert,update,delete) and jtable. actions have key bindings so i don't need buttons to ever get focused, i'd preffer jtable to have focus all the time so key presses (up/down
-
Why are there now TWO Adobe Flash Players needed to view all websites: v11.9.900 and v12.0.0.43?
I had Adobe Flash Player v.11.9.900.170 and upgraded to v.12.0.0.43. When I checked the Add-Ons manager, both Flash versions were listed and active. I de-activated the earlier version, and now some websites indicate I do not have Flash. When I re-act
-
Printer Dialog for Canon S9000 Printer
I dug out my large format Canon S9000 printer and am having trouble color correcting the photographic prints. Part of the trouble seems to be that in OS 10.6 I don't seem to be able to get the printer dialog box from the printer utility. When you go