Using Standard output determination to advise PO changes in SRM

Hello experts,
Please advise if it is possible to use standard output determination to trigger IDOC creation on changes in PO's in SRM. I know this is standard functionality in ECC but not sure if this can be implemented in SRM.
thank you

No Replies.

Similar Messages

  • To Transfer Data from Ztable using standard output ( FAX ).

    Is it possible to send data stored in Ztable to standard output device like FAX .
    Infact in a standard program we are using badi which in turn stores data in a ztable and i want to output data stored in this ztable using standard optput device ( fax) .
    If possible please guide on the procedure.
    Message was edited by: vidya bhushan
            Vidya Bhushan

    Hi Ravi,
    Thanks for you help.
    Ravi can you guide me on how to get the layout of the fax. Here fax is at client site so i am unable to get the fax sent. So if i configure dummy fax then can i see the fax layout . probably if possible you can send me the code where you called the function module SO_NEW_DOCUMENT_SEND_API1.

  • Automatic PO output Determination do not get trigger for SRM Classic impl

    Hello,
    We have implemented SRM 7.0 classic scenarios. We have set up system in such a way that whatever user put in Preferred Supplier at Shopping cart while saving the shopping cart we convert it to Supplier partner type and once approved create PO in ERP system.
    Things are working perfectly fine but the problem we are facing is Output determination. We have Vendor email address maintained in vendor master and placed Condition type in MN04 for vendor with Immediate output of email.
    But whenever PO is being created that automatic output determination is not being triggered...
    Could anyone please help what thing i am missing.
    Thanks
    Ritesh

    Hi,
    Please check the created condition record in MN06 in all aspects i.e. partner fucntion name, Medium (5), Language, etc.
    I believe  you have created the condition record with the combination of vendor/pur.org/document type.
    Also check the Actual processing tab and general data is there any check box against Locked field.
    Thanks
    Rajesh K

  • Automatic output determination for SO when changes done

    Hi
    I created one output type ZNSO for sales order and created access sequence and condition record for Order Type in VV11. Now, I am able get that output type ZNSO in messages automatically while creating SO (VA01) and posting an IDoc.
    But, my requirement is, If I change the sales order (VA02) that should post an IDoc automatically (User doesn't want to enter output type manually).
    How can I achieve this. Plz help me on this.

    Hi
    In NACE, Select the output type.
    There in GENERAL tab,
    CHECK on MULTIPLE ISSUING,
    Fill Program as FM06AEND and
    Form routine as CHANGE_FLAG.
    BR
    Asik.

  • Output determination for Customer Account group - A brain teaser

    At the place of configuration for Account groups, there is a field called Output Determination which has values like DB001, DB002 etc which says output for sold to, ship to and so on...
    What is the purpose of maintaining output determination procedure at the account group level?
    And also, where can i do the complete output determination for it? Like i could see Output determination for sales activities, sales documents, billing documents and shipping...But no where in the img screen, i found a place where i can configure these? Any ideas?

    In SAP, we send different output types(read documents) for Inquiries, quotations, orders etc. to relevant partners (read contact persons) sold-to party, ship-to party etc. thru various transmission mediums like ex. Print, Fax, e-mail etc.
    Output can be determined by using component output determination procedure. System should know from where the output is to be determined whether from IMG or from customer A/C group.  This is depended upon the control that we can activate or deactivate in "Check access for condition type" in definition of the output type (T.Code: NV03)
    Output Determination:
    IMG > Sales and Distribution > Basic Functions > Output Control > Output Determination  Output Determination Using the Condition Technique > Maintain Output Determination for Sales activities/ Sales Documents etc.
    Regards
    AK
    Reward points if helpful

  • Output determination - Requirement

    Hello Gurus
        I have an output type which is always entered as manual only in the sale order. If the order is on credit hold then system should issue an error message when the user selects this message type. I have created a requirement for this and attached in the determination procedure. When the output type is entered manually system is issuing a message stating that for manually entered output types requirements won't be executed.So the requirement is not getting executed. Any other way to solve this?

    Hi There,
    The solution for your problem is simple just setup the output type using automatic output determination instead of manual entry
    Anyway, you can revamp the requirement, create another user exit to check the credit status against the output type on USEREXIT_SAVE_DOCUMENT_PREPARE in program MV45AFZZ.
    Regards,
    Gumanti

  • CONDITION TECHNIQUE -  Output Determination

    Hi,
         I have a billing document having document type ZSTP (Stock transfer posting). There is one condition record for this billing type in output type(Condition type) and after selecting this condition record I pressed COMMUNICATION button on the application tool bar,in the new screen I can see some output device(printer) say "epson_9" is there. My question is wht is the purpose of maintaining condition record for this billing type ZSTP and a printer,anyhow v get the default output device(printer) say "epson_2" which v set in SU3 tcode. And this condition type is attached to this billing type in SAP IMG -> Sales and distrubution -> Basic function -> output control -> Output Determination -> Output Determination using CT -> Output Determination for Billing -> Asign Output Determination Procedures.
    Through which printer we get to print this document either epson_2 OR epson_9. if so,plz tell reason for that....
    I am a bit confused with this output determination using CT...Awaiting your replays
    Helpful answers will be rewarded.
    Thanks & Regards,
    V.Raghavender.

    Hi Mohan,
                   Thanks a lot for your reply. As you are telling that, if we maintain condition record, system will create output document after creation of the billing document.
    May I know in which transaction code I can see that created output document ?
    We can also maintain printer in the billing document itself,like after opening the required billing document, in the menu bar - GOTO --> HEADER --> OUTPUT, by giving the condition type,selecting that line and pressing Communication button on the application tool bar for maintaining printer.
    Please tell what is the difference in maintaining condition record and directly maintaining by through the menu bar - GOTO --> HEADER --> OUTPUT ??? & what about the USER default printer in SU3
    I am online at raghavendervit at gmail.com.
    Helpful answers will rewarded
    Thanks & Regards,
    V.Raghavender
    Technical Consultant

  • Function where PO output determination is decided

    Hi,
    Does anyone know the name of the function or equivalent where the PO output determination logic can be found in SRM 5.0?
    Our system started resending POs to vendors if the output medium is XML when the PO is completed.
    Thanks,
    Jerry

    Hi Jerry,
    Please check the IMG settings in the transaction SPRO:
    SAP Implementation Guide -> Supplier Relationship Management - SRM Server
    -> Cross-Application Basic Settings -> Set Output Actions and Output Format
    -> Define Actions for Document Output.
    Thanks,
    Pradeep

  • How to use output determination: track changes made on the contract

    We have a third party application which is requiring a delta change log of contract from SAP, does anyone know the mechanisms of using output determination to track all the changes on contact level?
    Thanks a lot!

    Hi,
    You can use SAP change documents.
    Please refer to the link below:
    [http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/7e713ae142d65de10000000a114084/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/7e713ae142d65de10000000a114084/frameset.htm]
    Cheers

  • Output determination in Create/Change.

    HI Gurus,
              How can I diifrentiate whether Sales order is created or changed in output determination, I'm sending data to XI through a custom IDOC. I want to send different data for creation of order and Change of Order how can I handle this.
              Where should I andle this in a driver program.
              Imeediate soultion awaited.Thanks.
    Kind Regards,
    Suresh

    Hello Suresh,
    1. You can track it using sy-tcode and check whether it is VA01 or VA02.
    2. Other way is you can check in the Idoc Message type and your Partner profile configuration.Under the Message control, you can find a check box, which would tell you whether you should trigger your idoc on create or change. If it is unchecked, it would send on create and if checked, it will send during change mode.
    Thanks!
    Suresh Ganti

  • Email output using Standard SAP and outlook

    Can anyone provide detailed configuration tips for output determination which includes defining communication strategy, output types, output procedure and condition records?
    I am trying to set up email generation to customers based on billing documents.
    Regards,
    Ottley.

    Hi
    Please see if the below steps help you- let me know if you need any more information, You ahve to seek help from your basis team in completing the necessary basis related settings
    1. You must maintain email address in Customer master data.
    2. The same applies to user master data.  For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the  Customizing via the following path: 
    (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). 
    As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Please see that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    3. Use the standard SAP environment
    4. In the condition records for the output type, use medium '5' (External send).
    5. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    6. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.

  • Config to email using output determination

    Hi,
    I'm trying to set up output determination that will email a PDF of the invoice at the time of invoice creation.  I've created a communication strategy with a single entry for communication method "INT" for email.  I added an entry for simple mail(7) in the processing routines config of the output type and pointed to my sapscript form and print program.  I created the master data record using VV31 and added my own email in the communication section of the master data record.  When I create my invoice, the correct output record is determined, but when it attempts to process at save, the system returns with errors in the processing log.  The error message states "No communication type from strategy RD00 could be used".  The diagnosis section of this error message says that the message type should be sent with a communication type, but I don't understand why this information is not pulling from the configuration that I set up.  Any help would be greatly appreciated!
    Jim Tollett

    Hi James,
       Every output type has a driver program (and subroutine combination) configured for each communication medium. Usually what you are looking for (email PDF) is not supported by most of the standard output types. You may need to write a driver program for this communication medium (7) or enhance the standard to support simple email.
    Cheers,
    Sanjeev

  • Print HU label from Outbound delivery using output determination

    Hi,
      We have a business requirement to print HU labels from outbound delivery. The steps followed are
    1) User executes VL02N
    2) User clicks on packing
    3) Material is entered to pack. HU is automatically generated.
    4) After saving the delivery, output message is triggered.
    Output determination is as follows
    1) An Z output type is created.
    2) Form entry and smartform name is assigned to this output type
    Issue:
    The issue is when the output message is triggered and the code in the form entry is executed, the handling unit (from nast) is not yet committed in the database. Since it is not updated in the database table, we cannot get any handling unit data to be printed.
    Any inputs on how to print HU labels using output determination from outbound delivery is appreciated.
    Thanks,
    Sandeep

    Hi Surya,
         Thanks for the reply. But, my question was how to print labels from VL02N when i pack a material on this delivery.
    Regards,
    Sandeep

  • Changing standard output from Text to XML customization?

    Hi Team,
    We wanted to get an excel output for a standard reports Accounts Payables Trial Balance, we changed the output from Text to XML. We did not attach a data definition or template definition ..we just wanted to see the XML output.. We got an error in the process ."Caused by: oracle.xdo.parser.v2.XMLParseException: '=' missing in attribute" .. for which we raised a TAR..
    We were told in the TAR that changing the standard output from Text to XML is customization!!!!... can you please clarify if this is the case..

    Hi
    Is this issue get resolved ???
    Thanks
    Shivdeep Singh

  • Output Determination using Requirement for Shipment

    I created a new output requirement, 909,  to handle two different formats for shipment bills of lading.  The new requirement prevents a NAST record for format B from being created if a NAST record for format A exists.  It works in the development environment and was transported to the QA environment.  It does not work in the QA environment.  It appears the requirement is not being check.  Output determination procedure, access sequence, and output types are the same.  The condition records created via VV73 are the same.  What could cause a requirement to not be used?  Thanks for your help.

    Needed to execute RV80HGEN.

Maybe you are looking for