Using sub acceptable video card

My X800XT card died, so I had to put back the 9600 card that came w/ my Mac. Now I get the error message saying card no acceptable for Aperture. As I have lots of work to do this wkend, I was wondering if anyone has figured out how to get Aperture to open anyway.
Mark

Ok, I found something and it looks a bit risky.
So, does anyone in the bay area have a backup video card I can borrow until my new X800XT gets here(middle of this coming week)?
Mark

Similar Messages

Blue screen when attempting to use the dedicated video card

I keep getting a blue screen when attempting to use the dedicated video card.
I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
What could be causing the problem? This problem just recently appeared. Two weeks ago.

boogs wrote:
I tried installing the drivers for my laptop from HP's support site. Still the same result.
This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
Could this be a problem with the graphics card itself?
Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

I'm use two screens, Firefox 4 is not displaying correctlying on my second screen. How do I fix this? (I have Windows 7, 64 bit, and using an external video card)

It only happens on the screen I'm using the external video card. I'm assuming its a bug.

I think this is related to other posts, the solution at the moment seems to be to disable hard acceleration.
see here: [http://support.mozilla.com/en-US/kb/troubleshooting%20extensions%20and%20themes#w_the-problem-does-not-occur-in-safe-mode]
Similar problems
[http://support.mozilla.com/en-US/questions/786524]
[http://support.mozilla.com/en-US/questions/794823]

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Lenovo g550 can't use wifi or video card after clean install of windows 7 from generic iso

My hard disk crashed and I didn't have the restore cd, and windows doesn't see the WIFI or Video card now. I've updated the drivers from support but it still work see them. I haven't tried updating the bios version yet. Is there a step i'm missing?
Solved!
Go to Solution.

Hi Ryan!
Welcome to the forum. Please post a picture of device manager. That will give a much better idea of what's missing.
It is always best to install drivers in the following order. Chipset, Audio, Video, Ethernet, Energy Management and then the rest.
http://support.lenovo.com/en_IN/research/hints-or-tips/detail.page?DocID=HT072728
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an Accepted Solution

G5 w/ PCI-express, use of standard video cards

I was wondering now that Apple is using PCI-express, can you use standard off the shelf PCI-express video cards normally for use on Windows boxes?

Also this....
http://www.hardwarezone.com/articles/view.php?cid=3&id=1688

Use PCI-e video card and onboard video at same time

This is going to be really annoying if i cant use both at the same time. I am trying to get 3 monitors running and want to use the onboard display port or vga port alongside my PCI-E video card and it seems in the bios that only one can work at a time. I am assuming this means i have to use a PCI card with my PCI-e one to get more than the 2 i have at a time.
Has anyone gotten onboard working alongside a PCI or PCI-E card? Seems like a silly thing to not enable in the Board as businesses have a need for more than 2 sometimes.
Any assistance would be great.

lead_org wrote:
this is only possible with selected versions of the Thinkcentre equipped with AMD processors using SurroundView.
Intel equipped motherboard does not allow this.
Actually, a number of later Intel based systems allow for concurrent internal and PCI card-based graphics:
ThinkCentre M71e, M81, M82, M83/p (Small Form Factor) SFF/Tower, M91, M91p SFF/Tower, M92/p,M93/p SFF/Tower
ThinkCentre Edge 71, Edge 72, Edge 91, Edge 92
ThinkStation E30/E31/E32
http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228
I myself use a M91p with 3 monitors on a AMD HD 6670 plus a 4th on the DP motherboard (Intel HD2000) port.

How to SET or Configure BIOS to use XFX6200 TC video card for MSI K8N NEO4 Plat.

Hello Friends,
Can any body help me to the following problem?
I am having XFX 6200 TC Geforce / nvidia Grafix card for my MSI K8N NEO4 Platinum Ultra board.
The BIOS states PCIE clock speed as 100 Mhz as default. The setting can be changed upto 145Mhz.
My Video card can be configured upto 350 Mhz. How to do this and which is the right way to use the display card with optimum setting?
Thanks for all those who reply to this.

the coolbits link http://downloads.guru3d.com/download.php?det=815
to manually set the clocks on the graphic card, after installing coolbits, just follow the instruction on that page:
Quote
Unpack the achive (self extracting) and then in the setup directory simply click on the .reg file. To get to these options simply right-click on your desktop and go to 'NVIDIA Analog Display' (Win XP/2003). For Win 2000 and lower you may need to get to the Nvidia Control Panel the old way. Right click desktop > Properties > Settings > Advanced > GeForce xxxx
for overclocking just take a look at the overclocking sections of the forum. make sure to read the stickies before you do anything.

No video output option at movie project setting can not use my blackmagic video card

no video output option at movie project setting can not use my blackmagic video card

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

Can i turn off integrated video adapter and use only discret video card?

pavilion g6 2284sr. I have not menu in BIOS to do this. I have not menu in Catalyst control center to activate discret card for all processes. i have not any rules for do anything with this problem. Pls can you give me bios programm version that wiil give me rules. I don't know is my discret card all right. Please do not describe me how i must to assign programms for each graphic adapter.
And where i can read information about all components of hardware for this notebook.

For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

Mountain Lion change color profile when use discrete video card

MacBookPro mid 2010. Update Samsung SSD 830.
Mountain Lion 10.8.2 just installed (new installation).
Reset PRAM and SMC. Done. No result.
Try with GfxCardStatus. No result.
When the system uses the discrete video card changes the color profile.
I'm not the only one with this problem.
Someone managed to solve the problem (really)?
I DO NOT ACCEPT COMMENTS OR ANSWERS USELESS.
Sorry, but slightly altering after losing three hours in forums where no one ever answered ...
Thanks.
Stefano.

Let's see...
Sounds like you're running into an expected issue if you make an alias to removeable media. The same thing would happen if you made the alias to a folder on a DVD-R disc or CD-R. If you eject the original, you disable the alias.
If you copy the entire SD card volume to your drive, the PRIVATE package should copy across. Then, as a folder on your hard drive rather than a volume on removeable media, you could make an alias to the STREAM package for quicker access later.
I'm pretty sure that Handbrake, like Prmeiere Pro, can see the MTS files directly. That is, it's not dependant on the other folders in the PRIVATE directory sturcture. As such, you could copy the contents of the STREAM package to another folder on your drive. Just be mindful of the default MTS file names if you're using more than one SD card (you don't want to accidentally copy 00001.MTS from one card over 00001.MTS from another card).
As long as Handbrake sees MTS directly, you could even rename the MTS files after you've copied them.
On a side note, I almost always archive my SD cards with the data structure intact. More often than not, that file structure is important to corretly access the video stored within that structure. If something unexpected happens while working with the MTS files, it is good to have the original file structure to go back to. Although, SD cards are getting to be so low cost that sometimes I just label the SD card and store it for archiving.
-Warren

Pavillion x2 cant project to another creen try updating driver or try a different video card

I dont know if i could watch my laptop on my tv before hand but i assume i could as its a new pc ive just updated to windows 8.1 and plugged in my hdmi cable to my laptop pressed the f4 button and get a message "cant connect to another screen try updating drivers or use a different video card" my pc says driver is up to date any ideas please help!!!!

Hello @h14ppy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to successfully connect your notebook computer to your HDMI TV, and I would be happy to help!
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you are using an adapter between the notebook and the TV.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Ray Traced 3d and MY video card overheats

Hello,
First off, I am not trying to get support to fix this, although some insight what might be going on would be great if someone has an idea. I am using a GTX 480 with After Effects. Yes, I realize this is not a supported GPU but it does work, in my case, not the best.
THE ISSUE: I created a motion graphic that was basically 3 words and some shadows and reflections. I used the ray trace 3d render option, and when I was close to being done, I tried to render it. Unfortunately the video card temps skyrocketed from 70-80 to over 100 degrees celsius before rendering 2 seconds of the clip.
Is this something anyone else using a similar video card has experienced? I just want to see if anyone else has this issue using a GTX 480. Again I understand its not supported by Adobe, but this is what forums are for, to find others that may have had same issue.
I can still render, but it involves me pushing the card to the limit, pausing, and then restarting after the card has cooled down. I do have the most recent drivers from Nvidia, v 306.23. The ambient temps in my house are around 70 degrees Farenhiet, and my card idles at around 45-50degrees celcius. I have 24 gigs of ram and a i7 920. just for comparison sake, not sure if this is needed.
It might be an air flow problem too. I plan on getting a new pc when the new i7's come out next year, but this is putting a hamper on my work now. I am only a hobbyist/part time freelance at the moment.
Thanks for any input.

I believe standard maintenance for air cooled electronic equipment that has no air filtration system built in should be a monthly light cleaning and a semi annual thorough cleaning. One of the facilities that I occasionally work for on a freelance basis only cleans their machines when they fail. Something has failed on almost a third of my visits.
The last PC I built I put a filter in the air inlets. There's all kinds of materials you can get that do a good job of catching most of the lint without fouling up the air flow.
I have my laptops cleaned at least semi annually but I vacuum out the air vents twice a month with a low power device that doesn't spin up the internal fans. You've got to be careful that you don't damage the equipment by over revving rotating parts with too much air pressure.
If I were to set up an office workspace I'd put an electrostatic air cleaner in the office to minimize dust. One equipment failure on a project with a deadline would pay for a really high end filtration system. I run electrostatic air filtration in my home instead of the paper air filters on the HVAC system. It's amazing how little dust and lint we get in the house.

Java plug-in does not work on DELL laptop w/ ATI video card

Hello there,
I try to run Java Web Start on my new DELL laptop with ATI mobility radeon 7500 video card. When I run the SwingSet2 App, the whole system locks up, so I have to do a hard re-boot on my laptop. I found that this problem happens to other DELL laptops when I address this issue to my co-workers. Nevertheless, this problem is fixed when I run Java Web Start on some other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any workaround for this problem?
Please help. Thanks.
A.A.

Hello there,
I try to run Java Web Start on my new DELL laptop with
ATI mobility radeon 7500 video card. When I run the
SwingSet2 App, the whole system locks up, so I have to
do a hard re-boot on my laptop. I found that this
problem happens to other DELL laptops when I address
this issue to my co-workers. Nevertheless, this
problem is fixed when I run Java Web Start on some
other desktops that does not use the ATI video card.
Have any of your experience this? Does any know any
workaround for this problem?
Please help. Thanks.
A.A.Do you use sun one studio? Do you experience system hangs and blue screens?
I do, and I was kind of hoping I'm not alone.
Morten

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Using sub acceptable video card

Similar Messages

Maybe you are looking for