Using submit in RFC

Hi,
Can we use submit and return in a RFC.
I have to call this from an external system....
This submit doesn't work return any list.
regards,
jinesh.

Hi,
There is no such restriction in RFC as i submitted the report RSCONN1 for mail sending. But what report u r going to submit and what that report will do. If it has front end interactions then it won't work because RFC will work on back ground concepts. Can u be more clear on this?
Thanks,
Vinod.

Similar Messages

  • In RFC can we use SUBMIT satement?

    Dear all,
    Thank u vvery much for ur response,
    In RFC can we use SUBMIT statement?
    I had a doubt Please clarify me.
    Thanks and Regards,

    Hi Lakshman,
    I am facing similar situation like Ravi.
    I am using Submit program inside RFC function module in BW.
    And one point here, I am using EXPORT and IMPORT memory IDs in the same RFC to retrive data in BW.
    I am calling this from R3.
    In BW it is working fine, where as in R3 nothing is coming.
    Please help me.
    Thanks,
    Veerendra.

  • How to get spool number when using SUBMIT job

    Hi All,
    I am calling standard program using SUBMIT through JOB as below. Now I need spool number for this job to covert the output to PDF and send to mail. See the below code and guide me.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = name
      IMPORTING
        jobcount         = number
      EXCEPTIONS
        cant_create_job  = 1
        invalid_job_data = 2
        jobname_missing  = 3
        OTHERS           = 4.
    IF sy-subrc = 0.
      data: Zscreen type table of RSPARAMS with header line.
       Zscreen-selname = 'PM_AENNR'.
       Zscreen-kind = 'P'.
       ZSCREEN-LOW = '500000000125'.
       APPEND ZSCREEN.
    SUBMIT RCC00130 WITH selection-table Zscreen TO SAP-SPOOL
                        SPOOL PARAMETERS print_parameters
                       WITHOUT SPOOL DYNPRO
                        VIA JOB name NUMBER number
                        AND RETURN.
      IF sy-subrc = 0.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = number
            jobname              = name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5

    Hi,
    Do this way, first get print parameters by using function module 'GET_PRINT_PARAMETERS'
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = 'LP01'
          list_name      = 'TEST'
          list_text      = 'SUBMIT ... TO SAP-SPOOL'
          immediately    = ' '
          line_size      = '1023'
          no_dialog      = 'X'
        IMPORTING
          out_parameters = wa_pri_params
          valid          = w_valid.
    If it returns success then
        IF w_valid EQ 'X'.
          CONCATENATE 'R'                                   
                       w_tabix                                
                       sy-datum+4(4)
                       sy-uzeit INTO
                       wa_pri_params-plist.
        ENDIF.
        SUBMIT rprccc00
               WITH firmennr = w_cid
               WITH bel_clus = 'X'
               WITH testlauf = ' '
               WITH not_lokl = 'X'
               WITH file_in  = w_arc_out
               TO SAP-SPOOL WITHOUT SPOOL DYNPRO
               SPOOL PARAMETERS wa_pri_params AND RETURN.
        COMMIT WORK AND WAIT.
    SELECT rqident
             FROM tsp01
             INTO w_rqident
             UP TO 1 ROWS
             WHERE rq2name = wa_pri_params-plist.
      ENDSELECT.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid     = w_rqident
          no_dialog       = 'X'
          dst_device      = 'LP01'
          pdf_destination = 'X'
        TABLES
          pdf             = t_pdf.
    Hope it solves your problem
    Regards
    Krishna

  • How to get data from the called program using SUBMIT in a background job?

    Hi Experts,
    I've a program which creates a background job using JOB_OPEN and JOB_CLOSE function modules.
    Between the above function modules I need to call a program using SUBMIT VIA JOB statement.
    My problem is, How do I fetch some data in an internal table in the called program to the calling program after the SUBMIT statement?
    I tried to EXPORT and IMPORT the data, but they are giving a failed sy-subrc when using this background job.
    Kindly let me know your inputs and valuable suggestions.

    Kumar,
    When we execute a program as a background job then the output will be sent to Spool which needs to be fetched again.I guess we need to use Submit via spool as mentioned by Rajat.
    Check these threads to get some idea
    submit report to spool & import spool id
    Re: Generate Spool for a report
    K.Kiran.

  • Using SUBMIT program command in Background

    Hi,
    I am submitting the program in Background using Submit<program> command.
    Job is getting released but not fininishing(not executing the program) in ECC6.0.
    Same program is working in fine in 4.5b.
    Please let me know if any one faces this situation. Its very urgent.
    Expecting the reply from you soon..
    Thanks
    Regards,
    Raj A

    Hi,
    perhaps you or your admin have configured to less batch-workprocess or they are all configured only for A-class jobs.
    Try to start the job as A-Class job. If the program is executed, then ask your administrator to configure more batch workprocess that are not reserved for A-class jobs.
    Regards,
    Stefan

  • To run a program in BACKGROUND using SUBMIT

    I need to run a program in background using the SUBMIT option. Here i have to pass an internal table form one program to another which will be used to update sales orders using BDC.
    Questions
    1} Can we execute a program in background using SUBMIT?
    2} I am sending data to a MEMORY ID , if i run the program in background will the memory id work. As in do  memory IDs work in the background.
    Thanks in Advance

    refer  same thread.
    Re: Problem with SUBMIT in Background

  • How to call RFC in Async Mode using TCP/IP RFC Destination ?

    Hi experts,
         Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ?
    Regards,
    Umesh

    Check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/content.htm
    It says
    <b> For asynchronous calls, no connection to external systems is possible (TCP/IP connections in transaction SM59).</b>
    Regards,
    Abhishek

  • Calling a Report Program In Web Dynpro Using Submit statment

    Hi all,
             Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
    Field symbol has not yet been assigned.
    The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: CHECKBOX_OUT of program SAPLKKBL
    Form: GEN_LINE_OUT of program SAPLKKBL
    Form: DATA_OUT_SIMPLE of program SAPLKKBL
    Form: LIST_OUTPUT_NEW of program SAPLKKBL
    Form: FIRST_LIST_DISPLAY of program SAPLKKBL
    Module: LIST_DISPLAY of program SAPLKKBL
    Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
    Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
    Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
    Form: PBO of program SAPLSLVC_FULLSCREEN
    Edited by: VINMANO on Jul 22, 2009 2:54 PM

    HI,
    Its possible to call report program from Web dunpro...
    chk out dis link,
    calling report(se38) in webdynpro abap
    By the way are using field symbol anywhere and left it unassigned?
    Thanks,
    Divya.S

  • Implemanting Rosettanet PIP 3A4 using BAPI's / RFC's

    Has anyone implemented RosettaNet 3A4 scenario in a productive environment with XI using BAPI's / RFC's?
    We are looking to build B2B using Rosettanet 3A4 but having a hard time finding success stories. Any help would be greatly appreciated!
    Alon

    Hi Alon
    where do u work in israel?

  • How to use SUBMIT key word in the program in the program

    Hello Folks,
                     I want use SUBMIT statment in the program for calling the other program. My query is
    I have one report named REPORT1 and I am using the SUBMIT statment in this report to call the second report named as REPORT2. The flow of the program is I excute the first report REPORT1 and entr the value on selection screen of REPORT1, selection screen is having one parameter. then SUBMIT statment comes into picture to call the second report REPORT2 in this second report, I would like to pass the selection screen value of first report REPORT1.
          I want to know how to pass the selection screen value of the first REPORT1  to second REPORT2.
    Anyone please guide me in this regards.
    Thanks & Regards
    Chetan

    Hi Chetan,
    Try this report.
    Create two reports namely ztry, ztry1 as below.
    Run report ztry.
    When you run report ztry,
    ztry1 will get excuted first(through 'submit'),
    getting values from report ztry through 'import' and 'get parameter'.
    Report ztry.
    *Export and Import
    DATA: text(20) VALUE 'Hello',
          mem(20).
    WRITE:/ 'Export and Import' COLOR = 1.
    EXPORT text TO MEMORY ID mem.
    SUBMIT zawi_try AND RETURN.
    WRITE:/ ''' Hello'' exported to ZAWI_TRY successfully '.
    WRITE:/.
    *Set and Get Parameter ID
    DATA: var(20) VALUE 'Master'.
    WRITE:/ 'Set and Get Parameter' COLOR = 1.
    SET PARAMETER ID 'abc' FIELD var.
    WRITE:/ 'Set Parameter ID is success'.
    WRITE:/.
    Report ztry1.
    DATA: text(5),
          mem(20).
    IMPORT text FROM MEMORY ID mem.
    WRITE:/ 'Importing '' Hello'' from ztry:', text color = 1.
    FREE MEMORY ID mem.
    write:/ mem.
    DATA: var(6).
    GET parameter id 'abc' field var.
    write:/ 'Value got through Get Parameter ID from ztry:',var color = 1 .
    Thanks....

  • But how to use submit??

    but how to use submit?? i mean how to generate an event thru submit and how to receive these values in the next page

    but how to use submit??You can do it by using Simple HTML Code
    <INPUT TYPE="SUMBIT" VALUE="SUBMIT">
    i mean how to generate an event thru submit and how to receive these values in the next pageTo generate an event through Submit! You need to do this using java script.
    I think you are talking about assingning some values on the click of submit and collecting those values in the next page!
    To do that
    keep some input fields in page1. Then try to assign the values to those input fileds using javascript through onclick event.
    <INPUT TYPE="SUMBIT" VALUE="SUBMIT" onclick="javascript:callSomeFunc()">
    In
    callSomeFunc() {
    //Assign values to the hidden fields
    In next page say page2 collect those values using request.getAttribute(" InputHiddenFieldsName);
    That's it.

  • How to use IDOC and RFC adapter in 1 scenario?

    We have AAA field and BBB field and we want to send AAA field to receiver sap system using IDOC adapter and BBB field to receiver sap system using RFC adapter. But how to use IDOC and RFC adapter in 1 scenario and how to map and  what are the design and configuration objects we require to create?

    To achieve this you have to use
    Two Interface Determinations
    Two Communication Channels (IDOC & RFC)
    & Two Receiver Aggrements.
    Use the Enhanced Interface determination and give your conditions there. Based on you condition your interface mapping will be triggered and data will be sent to IDOC & RFC respectively.

  • Create spool for background jobs which uses submit statement

    Hi Gurus,
                 I have a quick question regarding the backgroud jobs. When we run a program in the background , it should create a spool for us, but, the problem comes when I am running a program in the background, its not creating the spool. This program uses SUBMIT statement. This program collects the data and it will submit to the other program and then retuen. In this case, its not creating a spool. Its very important for us to look at the spool for this program. Does anybody cam across this kind of problem? I need ur inputs.
    Thanks in advance, <REMOVED BY MODERATOR>
    Regards,
    Srinivas.
    Edited by: Alvaro Tejada Galindo on Mar 18, 2008 4:31 PM

    hi check this link ...
    Scheduling a submitable program as a background task with the number number in a background request name. After scheduling, the background task is completed by function module JOB_CLOSE and released immediately.
    DATA: number TYPE tbtcjob-jobcount,
          name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
          print_parameters TYPE pri_params.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = name
      IMPORTING
        jobcount         = number
      EXCEPTIONS
        cant_create_job  = 1
        invalid_job_data = 2
        jobname_missing  = 3
        OTHERS           = 4.
    IF sy-subrc = 0.
      SUBMIT submitable TO SAP-SPOOL
                        SPOOL PARAMETERS print_parameters
                        WITHOUT SPOOL DYNPRO
                        VIA JOB name NUMBER number
                        AND RETURN.
      IF sy-subrc = 0.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = number
            jobname              = name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDIF.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=backgroundsubmit&adv=false&sortby=cm_rnd_rankvalue
    sy-subrc  Meaning
    0            Background task scheduled successfully.
    4            Scheduling cancelled by user on the selection screen.
    8            Error during scheduling, i.e. when accessing JOB_SUBMIT internally.
    12          Error in internal number assignment.
    regards,
    venkat.
    Edited by: venkat  appikonda on Mar 18, 2008 6:32 PM

  • Problem using Submit statement

    Dear Experts,
    I am trying to use submit statement in a report for transaction ML85. I have used the below code.
    submit RMSRVF00 with FRGCO = 'S1'
                    with FRGGR = 'S1'
                    with listu = 'ENTRY_REL'
                    with ebeln = '4500000309'
                    AND RETURN.
    But when I execute the report the values which I set are not filled and the screens opens with error message as '' Fill in all required entry fields". I am passing values for fields Releasecode - FRGCO, Release group - FRGGR, Purchase Order - EBELN, Scope of list - LISTU.
    Please tell me why this message is coming and values are not set for fields.
    KR,
    Bharath

    hai,
    try like this
    SUBMIT ZVENDOR_REPORT_NEW1 USING SELECTION-SCREEN '100'
                  WITH SELECTION-TABLE TB_OUTPUT
                   WITH P_DATE = SY-DATUM
                   WITH S_ERDAT BETWEEN '01.01.2008' AND '01.06.2008'
                   AND RETURN.
    or you can go in this way using type pools:
    TYPE-POOLS RSDS.
    DATA: TRANGE                        TYPE RSDS_TRANGE,
          TRANGE_LINE                   LIKE LINE OF TRANGE,
          TRANGE_FRANGE_T_LINE          LIKE LINE OF TRANGE_LINE-FRANGE_T,
          TRANGE_FRANGE_T_SELOPT_T_LINE LIKE LINE OF TRANGE_FRANGE_T_LINE-SELOPT_T,
          TEXPR                         TYPE RSDS_TEXPR.
    TRANGE_LINE-TABLENAME = 'TB_OUTPUT'.
    TRANGE_FRANGE_T_LINE-FIELDNAME = 'S_ERDAT'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN   = 'I'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'BT'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-LOW    = '01.01.2008'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-HIGH   = '01.06.2008'.
    APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
    TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN   = 'I'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'NE'.
    TRANGE_FRANGE_T_SELOPT_T_LINE-LOW    = SY-DATUM.
    APPEND TRANGE_FRANGE_T_SELOPT_T_LINE  TO TRANGE_FRANGE_T_LINE-SELOPT_T.
    APPEND TRANGE_FRANGE_T_LINE TO TRANGE_LINE-FRANGE_T.
    APPEND TRANGE_LINE TO TRANGE.
    CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
      EXPORTING
        FIELD_RANGES = TRANGE
      IMPORTING
        EXPRESSIONS  = TEXPR.
    SUBMIT ZVENDOR_REPORT_NEW1 VIA SELECTION-SCREEN
                   WITH SELECTION-TABLE TB_OUTPUT
                    WITH FREE SELECTIONS TEXPR AND RETURN.

  • Problem in using Submit

    Hi Experts.
    I am calling another report in my program inside a method using SUBMIT statement.I can't use Export-Import because OO Concept does not support Export-Import inside a method.
    Please tell me how to pass a value stored in a variable using Submit?
    Thanks
    Abhishek

    Hi Abhishek,
    try out this code whether it is helpful.
    CALL FUNCTION 'JOB_OPEN'
    EXPORTING
    jobname = l_jobname
    IMPORTING
    jobcount = l_jobcount
    EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS = 4.
    DATA list_tab TYPE TABLE OF abaplist.
    IF sy-subrc <> 0.
    RETURN.
    ENDIF.
    Submit report to job
    SUBMIT rkpep005
    USING SELECTION-SET 'TEST1'
    VIA JOB l_jobname
    NUMBER l_jobcount
    TO SAP-SPOOL WITHOUT SPOOL DYNPRO
    SPOOL PARAMETERS ls_params
    AND RETURN.
    Regards,
    prasad

Maybe you are looking for