Using "SXIPPER" as an add on.......

....and having excruciating problems!!!
I have an absolutely APPALLING memory! And so have to use a password manager. I had problem very early on with FF's own so was recommended to SXIPPER. Lately it has been behaving stupidly with the worst thing being it suddenly starts to tell me it is "deleting all your passwords!" That would be a total disaster! I aske3d for support, waited about ten days and was rewarded with the message that they area aware of this and are looking into it? Sorry but not good enough for me.
Anyway I was wondering how I switch back on the FF own version?? Do I simply remove Sxipper? As I followed the instructions on the Mozilla site and it told me to go to the Edit menu and look for a tab which quite simply does not exist?? (To re-install FF's own password manager) I am not looking for a recommend you understand as I don't believe that is in the scheme of things (BUT if you have a 100% cast iron rock solid suggestion :) please feel free.....)
So how to get rid of Sxipper and revert to FF's own password manager is it in a nutshell (I am also prone to burbling as well! And I haven't opened a bottle yet.)
Thanks
Chris

From http://www.sxipper.com/faq#uninstall
To uninstall Sxipper go to your Firefox menu and choose Tools | Add-ons. Select '''Sxipper '''from the list of extensions and click the "Uninstall" button. After restarting your browser Sxipper will be removed.
Sxipper still uses the Firefox Password Manager, so your passwords are all there. Uninstalling Sxipper will restore the default password manager functionality. See http://www.sxipper.com/faq#wherepassword

Similar Messages

I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

never mind. i think it just makes you review the information -- it looks like you have to click through everything.

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Using JSP, how to add new items to Fuego Business Object "Group" ?

Given the classic Fuego Business Object (FBO) example of an Order, which has a few attributes (orderNumber, customerName, Order Date) and a GROUP attribute called OrderItems (ItemName, ItemPrice, etc.), I want to use a JSP to allow user to submit order. My JSP has a form and uses the Fuego Tag Library. There are FORM INPUT elements for Order.orderNumber, Order.customerName, Order.OrderDate, and a table using dynamic HTML to add rows and INPUT elements for new items to add to the GROUP attribute OrderItems - ItemName, ItemPrice, etc.)
But when the user wants to add "OrderItems" to the order, I don't know how to get Fuego to create OrderItem Objects to add to the array (aka GROUP).
Thx in advance.

###### below is the response I response I received from a BEA Engineer. From looking at the html source of fuego presentations that implement desired functionality, it appears as though they handle it using the first suggested workaround below ######
Hi,
The short answer to your question is that there is no out of the box feature to support directly what you are asking for.
The problem is that JSPs receives a Fuego Object that is accessed at rendering time (JSP compilation/ HTML rendering). And then all the updated values are sent back to the engine in a new request when you hit the submit button of a FOR tag that has the postResult tag in the action attribute. At this point all these values are automatically taken from the request and the Fuego Object instance variable in the screenflow is updated.
After saying this you will notice that it doesnâ€™t make sense to update the Fuego Object instance on the JSP. Because you only could do this ate rendering time and because this instance is not going back to the engine (just the values).
Fuego Object tag Library was designed basically to be able to show Fuego Object data and invoke runs-on-server FO methods.
I see 3 different approaches to solve the problem you have:
1)Use JavaScript to call a runs-on-server method that recive the required arguments to extend the group and set the values. You should use the new tag called invokeUrl that allows you to use AjaX, in this way you could update the page with partial rendering.
2)Use JavaScritp to submit the form when the user click the add row button. And have a loop in the Screenflow with an automatic activity that will extend the group and the go back to the component activity that now will show the page again but with one more row. The drawback is that each time the user wants to add a row, it will require the entire page to be refresh.
3)Handle the table and values using JavaScritp and DHTML, and put all the new values in the request (input element), then in the Screenflow use an automatic activity to set this values to the Fuego Object.
Look at the Samples of using Fuego Tag Lib and AJaX
albpm5.7\studio\samples\Integration\Portlets\PFoodDelivery.fpr
albpm5.7\studio\samples\Integration\ThirdParty\AJaX.fpr

XI 3.1 SR3 on Solaris SPARC - using ccm.sh to add new node ?

Hi,
I'm configuring the XI 3.1 SR3 Integration for SAP component on my newly built BOE 3.1 SR3 environment and have a question on the "configuring SAP server side trust" part of the configuration. On page 91 of the Int Kit for SAP guide it states that :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
The trouble is that the BOE S.1 SR3 administrators guide for "adding a node" on page 63 describes the process on windows where the ccm GUI tools is used. On unix however the ccm.sh command line tool needs to be used and looking at the "ccm.sh -help" options I can't see anything listed that could be used to perform this add node procedure.
Can anyone suggest to me how I can setup this new node that is required so I can continue with the XI 3.1 SR3 Integratrion for SAP setup.
Regards,
Brian.
I'm new to BOE so please accept my apologies if this is a basic task.

Hi Seb,
thanks for this. I suppose I'm unsure on this due to me only just becoming involved with BOE, the Integration for SAP document isn't very clear on this process for setting up a new SIA. I checked with the project manager and this needs to be setup to enable their planned usage. I'll take a look at using the serverconfig.sh utilility to create a new SAPProcessors "node".
I'm assuming I can then use the CMC as per step 2 in the XI3 SR3 Integration for SAP guide, page 91 :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
Regards,
Brian.

What is the use of OTYPE_REF in Add method

what is the use of OTYPE_REF in Add method

class A
static public void m(){}
class B extends A
static public void m(){}
}is this over riding? well static methods are bind at
compile time then there shouldnt be any over riding
in case of static methods but when we use final
keyword in the method of class A it makes an error.
when static methods are bind at compile time then
what is the use of final keyword with static methods?there is none, since static methods cannot be overridden and final prevents them from being overridden

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals.

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals. It went crash.

Hi,
In regarding of the issue, please provide us more information to assist you better.
Do you mind telling us the Excel version number? Like 15.0.XXXX.1000
Would you like to collect the Event Log and App Crash dump file to do further troubleshooting?
As far as I know, if Excel crashes when using Analysis ToolPack add-ins, it usually causes by the >>Faulting module name: mso.dll<<, Please try the following method and check if it is helpful:
1.Copy/paste the Mso.dll from another PC.
2.Click "Start" and "Computer."
3.Double-click "C: Drive," "Windows" and "System32." The System32 folder opens.
4.Drag the Mso.dll file on your desktop into the System32 folder.
5.Click "Start," type "cmd" into the search field and press "Enter" to open the Command Prompt.
6.Type "regsvr32 mso.dll" (without the quotation marks) into the Command Prompt and press "Enter."
7.Close the Command Prompt and restart your computer.
Then, if the Faulting module name is not MSO.Dll, you also can upload(Or send to us via email
[email protected]) the Event Log/App Crash dump file. We'd like to do further troubleshooting.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Find text using regular expression and add highlight annotation

Hi Friends
Is it possible to find text using regular expression and add highlight annotation using plugin

A plugin can use the PDWordFinder to get a list of the words on a page, and their location. That's all that the API offers for searching. Of course, you can use a regular expression library to work with that word list.

Using Bloomberg Professional Excel Add-In with Parallels and Vista

Has anyone successfully used the Bloomberg Excel Add-In for Excel 2007, Windows Vista, and Mac OS 10.5#? Bloomberg professional works fine, but I can't get any data to populate with the BDS(), BDH() or BDP() functions.

Check the file permissions on c:\winnt\system32\msvcr71.dll. This needs to be 'Read/Execute' for 'everyone'. The add-in installation only gives permissions to the User who is installing the add-in. Which causes problems when other users need to access the Add-in. (Similar problem on Citrix / TS). <BR><BR>James Archer

Can I use my photos and add them or substitute them for wallpaper.

Can I use my photos and add them or substitute them for wallpaper on the Ipod Touch? If so, what procedure is suggested to add the photos and use them.
Thank you for your help.

Here are the instructions form the Users Guide:
Adding Wallpaper
You can set an image or photo as wallpaper for the Lock screen. You can also set
wallpaper for your Home screen. You can choose an image that came with iPod touch,
or a photo synced to iPod touch from your computer.
Set wallpaper (iPod touch 3rd generation or later):
1 In Settings, choose Wallpaper, tap the image of the Lock and Home screens, then tap
Wallpaper or an album.
2 Tap to choose an image or photo. If you choose a photo, drag to position it and pinch
to zoom in or out, until it looks the way you want.
3 Tap Set, then choose whether you want to use the photo as wallpaper for your Lock
Screen, Home screen, or both.
SInce you said you have iOS 4.3.2, you must and a 3 or 4G ipod.

How do I delete Yahoo email account I no longer use in iCloud and add gmail as my secondary iCloud account on my Mac Pro laptop and iPhone 4s? I have OS X Yosemite on my laptop and latest version on iPhone. I'm not particularly computer literate; ple

How do I delete Yahoo email account I no longer use in iCloud and add gmail as my secondary iCloud account on my Mac Pro laptop and iPhone 4s? I have OS X Yosemite on my laptop and latest version on iPhone. I'm not particularly computer literate; please respond accordingly.

You can do this at My Apple ID

Do I have to use add-ons or can I use Firefox savely without add-ons?

Can I use Firefox savely without add-ons? If not, how will I know which add-ons are needed? How save are the add-ons? What if an add-on contains a bug or a mistake? Will I get updates automatically?

Add-ons are optional. I find some of them incredibly useful, but you probably will end up with different ones that suit your needs or interests.
If the add-ons are installed from the Mozilla Add-ons site, then they are checked for updates on a regular basis.
Some add-ons will have bugs or cause conflicts with other add-ons or web sites. You can see the evidence of that on this forum, especially after major upgrades... All that flexibility makes Firefox harder to support, but everyone wants choice. :-)
I should add that much of the web does not work correctly with the Adobe Flash plugin, so maybe that one isn't so optional.

Is there an app you can use with iphoto to add ghosts to pictures

I am trying to find an app to use with iphoto to add "ghosts" to existing pictures.. does anyone know of any?

photoshop?

I use the proxy settings add-on in Firefox to access my company server. However, I updated Firefox this morning to the latest version. Now this add-on doesn'tl.

I used the proxy settings add-on to access the company server and wi-fi with my Android 2.36 phone.
This morning I updated Firefox. The add-on doesn't work anymore. I uninstalled it and went to the add on website to reinstall what I thought must be a new version. This add-on doesn't seem to exist anymore.
How do I change proxy settings with the new version of Firefox for Android?

The author of the add-on will need to update their version to be compliant with our newly rewritten Firefox for Android product.
The new version of Firefox does not provide a user-interface for manipulating proxy settings.
On the other hand, you can manipulate these settings yourself at your own discretion by visiting the URL about:config and searching for network.proxy
http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries

Using "SXIPPER" as an add on.......

Similar Messages

Maybe you are looking for