Using techtool pro found problem with "volume structure".  What to do?

Using techtool pro found problem with "volume structure" and this was not fixed by TECHTOOL PRO.  What do you suggest I do?

I would boot from my gray install disk (put the disk in the drive and restart holding down the C key). Then choose Utilities and run Disk Utility and click Repair Disk. As always, be sure you have a back up of your data first.

Similar Messages

  • Using Techtool Pro 5

    Hi, I just finished setting up my new Mac Pro. Pretty amazing upgrade from my old G5 dual 2.0! I was wondering if anyone has advice for using techtool pro to repair,defragment and rebuild drives from time to time. I certainly used it on my old power mac and it was helpful in optimizing performance.
    Thanks in advance.
    Howard

    stuck in an elevator with an insurance agent.
    I am in fact the designated elevator emergency operator at my Insurance office...
    I figured out one mystery, why I couldn't find the same options as before. I had been using TTP 4.
    There is a host of clear cut specified options for creating ones own set of tests in TTP4, that in TTP5 may, I don't know yet, be only possible by clicking the "next" button, which seems to be the one on the right.
    But the commands begin very slowly it seems. One click and wait half a minute or so might do it. I'm getting too annoyed to tell.
    If anyone can tell me where the old interface like structure is on TTP5, please do.

  • I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    Did you fix the problem? I have the same problem and it has been pain in the neck.

  • G20 - Problems with volume wheel

    My volume wheel isn't working as it should, when i'm trying to turn the volume down, it jumps up again. same when turning up, it's jumping down. To turn it up or down i have to turn and turn and turn before it moves. If I'm turning the sound up its like it's moving 1 up, 1 down, 1 up, 1 down, 2 up, 1 down... and so on.
    Does anyone have any solution for this problem? It's like this in Qosmio player and Windows.
    Truls

    Hi again
    I am not technician but according to your explanation I believe that there is mechanical problem with volume control dial. On this way we can just speculate but just intensive check can give you an precise answer.
    In my opinion you should contact Toshiba service partner in your country and explain them the situation. Sorry but I dont see any other solution.
    If the warranty is still valid the repair will be for free. If you need ASP address you can find it under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
    Bye and good luck!

  • HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

    HI. ...
    Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
    I have heard rumours in the past is that all sorted now?

    At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

  • Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

    Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

    Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4))    I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

  • Can I use filemaker pro 8.0 with Lion

    can I use filemaker pro 8.0 with Lion

    Lion is not yet released. You will find out after Lion is released. At this point in time no one knows what will be compatible and what will not.

  • MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

    Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

  • I bought a used macbook pro that came with xcode

    I bought a used macbook pro that came with xcode, this means I can develop Apps but to publish in App Store needed pay developer fees? Or must pay these fees from now?

    All you have are the basic tools. Without a paid program in your name, you cannot distribute apps to the store.
    See iOS Developer Program

  • Hi  i am trying to open a pdf  but " preview " is saying that the file cannot be opened or that there is a problem with the file  - what do i do? :-)

    hi  i am trying to open a pdf  but " preview " is saying that the file cannot be opened or that there is a problem with the file  - what do i do? :-)

    Try opening the file using Adobe Reader.
    Clinton

  • I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.  You will then be able to access Settings>iCloud again.

  • HT4623 I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    This is a concern amoung many corporate users.  It's going to take somekind of policy change with apple.
    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number

  • Volume rebuild using TechTool Pro 5 - How long??

    We put the OS X 10.5 install dvd in our Macbook with the intent to edit the administrator password and instead triggered what our Macbook thought was some kind of upgrade. We were afraid to cancel it, but about a minute in the "upgrade" ended up failing. We lost our ability to boot to the desktop and so we took it in to the Apple Store where they advised us that the node structure became invalid. They told us to either get Diskwarrior or TechTool Pro. We opted for the latter.
    We've been doing a volume rebuild now for the last 27 hours. Is this normal?? We did not have an external drive, but there's no indication that this is required. In further searching, we noticed that it's recommended to have one, but we don't. The program has been sitting at "repairing directory structure" and occasionally the dvd drive spins. There's no progress bar, so we don't know what is going on. Does anyone have experience with this who can shed some light on what's going on??
    Thanks!

    http://www.micromat.com/index.php?option=com_content&task=view&id=29&Itemid=45

  • Problems using Acrobat Pro to scan with 10.5.2 and HP7280

    Hello,
    I'm hoping someone can help me. I'm trying to use Acrobat Pro to create PDF via scan. The scanner I have is an HP Photosmart C7280 all in one. When I try to use it, it starts up HP Scan Pro and gives option is scan to Acrobat. Unfortunately, when I ask it to do so, it crashes Acrobat.
    Any ideas on what to do to make this work?
    Thanks

    BTW: whats with this Îικε stuff.
    As for Adobe/HP.
    They have had a long running feud of Sorts for years running.
    there was a very long period that spanned several versions of Acrobat, and HP Print Driver Updates. where every time adobe issued an update for Acrobat. Hp had to turn around and issue an update to their print Drivers.
    The controversy swilled around If a Pdf was printed through acrobat or Reader to an Hp Printer all you would se was a series of very fine line screwed sideways much like looking at a TV screen the Horizontal hold adjustment was out of whack.
    I'm sure Aandi , and Mike as well as myself posting thousands of times over the years to use the work around of going to print menu advanced and choosing print as image. And if it cleared the problem, to get on the horn with HP and let them know their driver was broken.
    HP would fix it it work for a month and Adobe would do another update, and the same thing would happen.
    It would be like the joke about Peat and repeat sat on a fence. If Peat fell off who's left? Pete. Then you would say repeat. And the person telling everything would repeat until you caught on.
    You would think that a Software That depending highly on how printers would print would actually have sample of printers from the printer vendors to test on.
    I also find it strange you never hear of any other printers having as much problems with adobe products.

  • Found problem with 7.4.2 firmware when using XBox360 wireless

    While I don't know exactly what is causing the problem, I have an Airport Express that is extending an Airport network for me and an XBox360 wireless adapter ... after upgrading from 7.4.2 firmware on the base station AND my Airport Express the XBox would regularly lose association with the network and the only way to correct it was to pull power to the Airport Express and hard reset it.
    Downgrading the Airport Express back to 7.4.1 (leaving the base Airport at 7.4.2 since it didn't appear to be part of the problem) correctly the problem and now my network is stable again for all users.
    I don't see a formal bug or troubleshooting point mentioned here .. but if you are having problems with the XBox360 wireless and the Airport Express at 7.4.2, I would try 7.4.1 until a new version is posted.
    Best to all ...
    -- mike

    My cousin's xbox with the wireless adapter is having the same issue. It sees other access points just fine, but wont see mine. I have Airport Extreme (single band). It was working just fine before the update, and all of the other computers/devices can connect to it just fine. The xbox wireless just cannot see the base station with that firmware. I am having him share the internet from his computer to the xbox, but if that doesnt work then I will have to revert back to 7.4.1.

Maybe you are looking for

  • Purchase order with ref to central contract

    we have created centrallly agreed contract with one vendor , but client wants to create purchase order using  that contract but with different vendor.(vendor field only ) (not through partner roles and vendor sub range)pl suggest if there is way.

  • CM25 Sequence Number Maintenance View

    Dear guru , i enter sequence number operation in the specific view of CM25. In the sequence number maintenance view the production orders are sorted in order of production order number. I want that production orders are sorted in this view in order o

  • Network user can't see local home directory

    Hi there, I have a Mac Mini running Lion Server with Directory Services turned on. I've been using this to allow network users to log into Lion clients, as well as set up mobile accounts. This has been working fine. Now I've just created a new networ

  • My ipad fails when trying to update

    why does my ipad fail when try to update

  • Are they going to have soon something closer to final cut pro 7?

    I am reporter and and download a trial of final cut pro X and i am quite dissapointed, I believe for my purposes it is not as efficient as final cut 7 or other programs.. are they soon going to come up with soemthing better?