Using text select tool in Preview--pasting into Word
Hi, since the recent updates made Acrobat Pro 7 unusable (installer crashes, Acrobat crashes upon displaying title bars . . . I've posted on this elsewhere), I have been using Preview. I noticed that when I select and copy a piece of text in Preview and then paste this selection into a Word document the selection is unreadable. Is there any way to make the image readable?
Liz,
I have the same problem. Acrobat Reader 7 works well in my computer... I do not know if you can copy/paste into Word. However, I am going to reintall the System X and not do the recent updates (QT7, wireless keyboard and Security from last Friday)
Similar Messages
-
Using selection tool to Cut image into pieces...
Hi all,
I was just experimenting with my Painter image editing software in my computer, and I just thought about an effect that I performed in my Painter software.
Actually, what I did is best show in images attached here. Please use them as a guide to my questions.
In Painter, I used the selection tool to seperate parts of my image as seen in my attached image. I just wonder whether one can do the same thing in after effects too.
Thanks and hope to here your responses to my question.Ok. Thanks for your great tips as I'll see where I can go from here.
Ugoharris.
Date: Tue, 22 Dec 2009 09:46:28 -0700
From: [email protected]
To: [email protected]
Subject: Using selection tool to Cut image into pieces...
Like Steve said, you'll have to use masks. To keep it clean and predictable, draw all your masks as needed, then duplicate the layer (Ctrl+D). then delete the masks on a given layer that you don't need. What is to become the background with "holes" also will need the mask modes to be set from the default Add to Subtract. Once you have everything, you may wish to use the pan behind tool (Y) to move the layer anchor points into the centers of the masked shapes, so animation becomes a bit more predictable.
Mylenium
> -
Text selection tool is too bad since many years ago
selected easily in skim on MAC
selected dont know what in acrobatX on MAC - -bkowdkpd wrote:
This problem, in my memory , has been there since 1X years ago when I was just starting to use computer, in other words,exsiting more then 10 years ... text can not be selected correctly in a word editing tool more than 10 years , is really an incredible thing !!
http://screencast.com/t/KwUOd83lWi
Use the select tool which is the arrow as I show in this movie. You can copy and paste into another document.
Now if you want to edit text that another subject altogether. -
In version 5, how do I use the selection tool to move objects?
I can use the selection tool to select objects, but when I try to drag it, nothing happens. My workaround is to use the selection tool to select an object, and then use the transform tool to drag the object into its new position. Any help is greatly appreciated.
is your object locked?
Message was edited by: lilia@
... or perhaps your clicking on the content grabber? -
Text select tool not working properly
When I use the text select tool, it selects columns, not words in a row, which is what I want. It used to work correctly. I am using Acrobat Pro, version 9.0.0.
I tried adding the ALT key, with no good result.Is it with this specific document o any pdf you work on?
If it was earlier working fine for you, try repairing Acrobat by going to 'Help' menu > Repair Acrobat.
Also make sure you have updated it to the latest patch.
Regards,
Ravi. -
PPro CC crashes when using Track Select tool
This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.0.0.342
Application Timestamp: 5176598d
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c0000005
Exception Offset: 0000000000052fc6
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 1ce0
Additional Information 2: 1ce04770b02f823ff20b7f82076eba51
Additional Information 3: c192
Additional Information 4: c19212ee5e1e8407cb093e848f6cb5d8
System specs:
Creative Suite CS6 subscription
Creative Cloud trial
Windows 7 x64, SP1
Nvidia Quadro 4000 GPU
i7-3039k CPU
32Gb of RAM
thank youYep, buggy project..
New project with same and different footage works fine
Other project created in CC works fine
Imported sequence from CS6 works fine
Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
Thank you for your replies! -
KdeGraphics-Okular - How to change the color of Text Selection tool
Hello All
I'm trying to know how to change/fix the color of the Text Selection Tool (Ctrl + 4). Because when I highlight the text, it's only one color (Dark Blue) that make me could not read clear.
---- My OS Configuration
OS : Arch
DE: LXDE
WM: OpenBoxThe highlight color is determined by the system-wide color scheme that you're using. There's no way to change it only for okular.
-
How to implement text selection tool
Hello,
I need to develop one plug-in. On click of menu, the cursor should change to text selection tool.
On selection of text, I need to get coordinates of text.
How to do this. Please help me to solve this issue.
Thanks,
ShilpHello,
Thanks for your response.
I have implemented the function for AVToolRec as follows.
AVToolRec AVRect;
AVRect.size = sizeof(AVToolRec);
AVRect.GetType = ASCallbackCreateProto(GetTypeProcType, &ToolGetType);
AVRect.DoClick = ASCallbackCreateProto(DoClickProcType, &DoClick);
AVRect.AdjustCursor = ASCallbackCreateProto(AdjustCursorProcType, &AdjustCursor);
AVAppRegisterTool(&AVRect);
ACCB1 ASBool ACCB2 AdjustCursor(AVTool tool, AVPageView pageView, Int16 x, Int16 y)
AVSysSetCursor((AVCursor) LoadCursor(NULL, IDC_CROSS)); //Works fine for cross
I want to develop the cursor as acrobat provides.. "Selection tool for text and images"
I tried to change the cursor to IDC_BEAM, But it's not useful. Is it possible to create the cursor as acrobat provides and get coordinates for the text selection.
Please help me to solve this.
Regards,
Shilp -
Skipping to the top of the document when text selection tool selected
This may be difficult to explain. But often after I click in the toolbar to switch over to a specific Adobe document (in windows 7) that I previously opened and that is open to a page other than page 1 and with the text select tool has been selected, if I click into the text on the page (say page 4) and then scroll down with the mouse wheel to get to page five, the program will jump back to the beginning of page 1. (display is set at single page - fit page). I like Acrobat very much, but I find this to be extremely irritating and wasteful when trying to select text from and navigate a large document. Can you please tell me why this occurs?
mari40 wrote:
I READ the user guide, which told me view>format bar>show format bar. I am talking about the bar that shows how to set the format-- font, spacing, etc. That has gone gray, and eliminated all the settings so I can't alter the settings or print.
Mari,
We're here to try to help you; we get some satisfaction out of helping folks to get along with their Apple Pages software. If you just take this one step at a time, I'm sure we can sort it out.
Thanks for clearing up what your primary issue is. You had Fruhulda all confused with your complaint about printing. I sort of glossed over the printing issue because you seemed to be more focused on the formatting.
Please re-read my first post - the part about the Format Bar being contextual - and let's go from there.
Jerry -
Need clarification using the selection tool
Hi all,
I have some strange (to me) occurrences while using the 'selection tool'...
Explanation:
I'm using PSE11 on a Win 7 (64) PC.
What I want to do is to create a new pic from an existing pic. The existing pic's background is unsuitable for what I want. But the FG is what I need. I thought that selecting the FG object and placing it into a new pic would be what I needed using the <quick selection tool>.
To do this, I am trying to use the <quick selection tool>. I've had varying degrees of success using it. One main thing I don't understand & pretty much renders my task useless, is the fact that whenever I use <refine edge> so that I can refine my edge selection, my pic is immediately lost or taken away. Since I have no idea as to what's happening, I am forced to close the pic (W/O saving changes, of course) & then re-opening the pic. All's well until I use the <refine edge> button again, then, my pic disappears AGAIN!
There are a few more details about this <selection tool> that I'm muddy on. Is there something where I can read more about its use? I would love to know more, but how? Where?
I am not a constant user of PSE, rather, I only use it on occasions. Normally, I use its scanning features. I may play around with a few other features, but I also know that PSE offers many other powerful features, I rarely, if ever, use.There are many selection tool and way to extract a subject. There are more way in Photoshop then in Photoshop Elements you should ask over in the Elements forum to get answers suitable for elements users. You may get answers here that are not possible to use in Elements. Photoshop Elements
-
When I use the selection tool to move vector points and bend edges, I only see the change in wire frame. Once I commit by letting go of the mouse button, the object does change. It just previews with a wire frame. I would like to see the preview change on the solid object. Is there a setting somewhere?
I sure hope I am explaining this for people to understand .
Thanks
EdHi Ed,
What do you mean by wire frame??And are you using selection or sub-selection tool since you have mentioned about vector point I doubt if it is sub-selection tool.Could you please attach a video demonstrating the issue where we see the mismatch in the preview and the output, so that we can understand the problem better and try to resolve it.
Thanks,
Sangeeta -
White lines using Quick Selection Tool in conjunction with the Content Aware Fill.
When using quick selection tool in conjunction with the content aware fill i get a white line where the image join is.
How do i stop this from happening?
Basically, i need the select tool to 'over select' into the next photo so its a seamless fills.
This isn't a complex seletion, its a photomerge with blank, white areas that i am filling in using content away fill.thanks for your help.
-
I just started using a new Windows 7 computer with Office 7 installed. I can no longer copy from any webpage opened in Firefox and paste into Word.
I can paste into email. Word to Word is OK. And copy from email and into Word is OK. But not from an opened webpage into Word.
Any help GREATLY appreciated!it sure would be nice if Firefox had technical help that customers could call for help.
-
Acrobat 9 - table/formatted text select tool
In acrobat 5 exist "table/formatted text select tool". That function exist in acrobat 9? Where?
thanksHi,
as its a long time ago since the thread was wrote, but sometimes anybody is looking it could help .
Select the text of yout table with the normal text selecting tool and open the context menu with your right mousebutton. There you can save the table with "Save as table".
Best regards -
[Bug] Photoshop CC,Layer Group add vector mask and disable it, use path selection tool click canvas, always crash!!! Please help me!
The sample psd file(158KB):
http://doc.aoyea.com/ps_cc_bug.psd
My Computer configuration:
SONY VAIO CA100 Notebook、Intel Core I5 2410 CPU、16GB RAM、AMD Radeon 6600M(1G RAM)、Windows7 x64 SP1(clean)、Scratch disk free space is 100GB
email: [email protected]Hi,
As far as i know that's a bug that will hopefully be fixed in the next update to photoshop cc.
Maybe you are looking for
-
Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to share to the media browser? I have done this many times before and never got this message. This is ver
-
HT3819 I have a Samsung tablet I want to connect to TV to use my Apple TV
I have a Samsung tablet I want to be able to connect to an Apple TV on my TV
-
Portuguese Suppliers Recapitulative Report
Hi All, Please let us know the process of generating the Portuguese Suppliers Recapitulative Report I have done the Prerequisites as mention in R12-Oracle Financials For Europe User Guide But still the report is blank even after running the EMEA VAT
-
Calling servlet with out entry in web.xml
Hi I want to know whether can a servlet be invoked with out having an entry in web.xml.Because to my knowledge when ever an entry is made in teh web.xml the <url-pattern> and the class file will be stored as key value combination it is only then when
-
Accessing Enterprsie login page?
Our DBA installed patch "XDO/ORACLE XML PUBLISHER CORE ROLLUP PATCH 5.6.2, # 5097966". Does that allow me to access the Enterprise pages? If so do i need a special responsiblity and what is the URL? Or is there another patch for this application? I d