Using the 192.168.1.115 IP address I can ot get into the camera.
Hello,
Just installed the WVC54GC WEB Cam and it sees the network both wired and wireless. But if I try to get into the camera to update the firmware and make changes to the settings I get the "Cannot find server" error message. I used ...
http://192.168.1.115 but it's not working. I can get into my 80211G Linksys router with no issues. Any ideas what is going on here?
Thanks
Bud
just bougt the wire less G RTZ internet cam , the helpdesk not to reach in netherlands, total overworkt. everyting installed bij typing 192.168.1.115 no connection possible. in the display of the cam stays that ip adress.
i am sick of this **bleep**, including that helpdesk.
i bring back the cam to the shop and get my money back as the promissed.
i will wait till the new sijstem comes of wireless USB that will be very friendly for installing the same as BLEUTOOTH that is also logical friendly software.
the old **bleep** as they use now, please throw it in the garbish.
better waith for the new sijstem than put 10 ours of installing old **bleep** now.
greetings , robert www.trebor.nl
Similar Messages
-
i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?
Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should. -
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
I have an iphone 4 and recently changed my apple id password. I went through the verification successfully. For some reason, I can't sign into the app store on my iphone using my apple id and password.
Apple doesn't monitor here. Best we can do is to push you to contact Apple directly.
This is from the iOS Dev Center forum...
http://devimages.apple.com/maintenance/
We apologize for the significant inconvenience that our downtime has caused and encourage you to reach out to ourhttps://developer.apple.com/contact/ if you need any assistance.
(Check under "Program Enrollment").
Note that your program membership should have been automatically renewed if it lapsed during the downtime period. If not, please be explicit about that in your support request.
--- DrErnie -
I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?
If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
read this article to give you direction how to put your device into recovery mode.
Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
good luck!
http://support.apple.com/kb/ht1808 -
My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!
Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least. If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer. -
I can't get into the itunes store without downloading itunes 10.3
I can't get into the itunes store through my itunes because the homepage has the add for updating to itunes 10. I tried to do it, but then realized I don't have the software for it, I need Mac OS 10.5 or higher and I have 10.4. How do I get to the itunes store still, surely I don't have to buy a whole new computer to keep using Itunes? Does anyone know anything about this?
I've got this as well and it seems to have affected only the Music and Home pages - do a search in the search bar and you will get to the films etc. Looks like somone goofed! If anyone from Apple checks this out, mine is the UK store. Home page and Music pages only affected.
-
Please I need a help. I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full. Please do you have a knowledge of how I can get rid of the message and get into the ipad?
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it. -
I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!I have tried all the above and nothing seems to work. Any other suggestions?
-
My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?
Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though -
Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.
Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos. Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?
-
I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner and get a drop down list. However, the screen is then white with "iTunes" in the middle. Any suggestions? Thank you.
Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If your computer has one of the LSPs listed you may have to reset winsock.
If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues -
Hello, I restored my ipod and now I can't restore my information back on my ipod. I read the manual on how to restore my ipod and I click the ipod under devices but, it won't let me get into the itune store. I keep getting error -9808. What can I do to resolve this problem? Thanks!
Have you seen this Apple support document?
http://support.apple.com/kb/TS2753
B-rock -
TS1424 is it just me that can't get into the store
is it just me that can not get into the store
You're not the only one some European countries (UK, Poland, Austria, Belgium, Germany < these are the countries that have confirmed they are having this problem) are having the same problem. This discussion is also highlighting the same problems you are having:
https://discussions.apple.com/message/22845142#22845142
I can confirm that the homepage and the music section in the iTunes store are experiencing this problem. -
My iphone 3GS gives me this message: Your Apple ID has been disable. How can I get into the apps?
Apple ID FAQ
http://support.apple.com/kb/HE37
Apple ID Security Alert
http://support.apple.com/kb/TS2446
Maybe you are looking for
-
CUCM 8.6 - Call pick up not working
Hello, We have a call pick up group when a user attempts to pick up the call "temporary failure" is displayed on the phone. Phone model is 8945. This is reproducable everytime. Any ideas to troubleshoot this would be appreciated. Thanks, Ayaz
-
Ok, I understand about numeric string formating (NumberFormat). But what I need help with is string formatting. For example, I'm working on an app with fixed-length records. Let's take a name field. I need the string "John Doe" formatted to a 40-char
-
How do I lock an ipod? We found an ipod and we can't tell if it is mine are not because it is locked. It says "ipod disabled, connect to itunes".
-
Top 10 SQL's by Physical reads
Dear experts, Oracle version - 11.1.0.7 Do we have a way to pull top 10 SQL's (physical reads) for a 24 hour period based on AWR data or other V$ views. Thanks
-
Hello,i have my new itouch,and i want to sync all the thing back in,and all the things could,without the apps, so do i have to press the download button for each apps 1 by 1 ? or is there a better way,like pressing a button for 'download all apps'?