Using the 23" HD for only monitor for Macbook

I just bought the 23" HD cinema display and when I am at my desk I just want to use the 23" display. I just want to close the lid of my macbook and use the HD screen. I also bought a wireless keyboard for that purpose.
But I cannot get the macbook screen to turn off. I turned the mirroring off, I still have two monitors on though. On my pc I can turn the laptop screen off and just use my LCD TV in the living room. I hope I can do this, otherwise it is not going to serve its purpose.
Any quick response is appreciated.

Hi there, I just read this post because I have this same problem. I bought the 20" Cinema Display which is hooked up to the 2.2Ghz MacBook. And like the post says, the display on the MacBook stays on the whole time and I have to lean over and turn the brightness down. Apparently you have a different idea. Let me see if I get this right:
1. You shut the lid on MacBook
2. It puts the MacBook to sleep
3. Then you touch the on button on the display which wakes up the display only
4. Is that right?
Thanks
ejr1959

Similar Messages

May I use the power adaptor for Macbook pro into Macbook Air?

May I use the power adaptor for Macbook pro into Macbook Air?

Yes. You can use one of a higher wattage, just not a lower wattage.
Here's the full info.
http://support.apple.com/kb/HT2346
Regards,
Captfred

Has Anyone Used the Pinnacle TV for Macbook Tuner?

I saw this product at the store yesterday and I'm wondering how well it works for recording TV programs and possibly movies onto my macbook. I am hoping it performs similar to a DVR, and I am also wondering if it would be possible to burn these programs onto DVDS? Any advice would be greatly appreciated.

i recently got it... it works great! only problem is it comes with eyetv lite, so you have to pay extra to upgrade to the full version of eyetv that allows exporting to diff ipod and apple tv formats.
The nice thing about the pinnacle compared to the elgato eyetv hybrid is that pinnacle tv for mac hd comes with a remote and a portable antenna. The pinnacle is also black so it matches my black macbook.
So yes it records well, but is limited by the "lite" software. Only issue is that u can only record at whatever resolution its coming in at. tv shows can get as big as 4gb for 1hr. you can burn it to dvds also but i think you need toast titanium.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone. Does anyone know how I can get my music? I know longer own the iPad so I don't have access to it, but I don't think that should be a problem.

So you had music on the iPad that is not in iTunes and you no longer have the iPad. Is that what you are saying? If that is what you are saying, iTunes won't "recognize" anything that was on the iPad, that was not purchased from iTunes. If the music was purchased from iTunes, you should probably be able to download it again for free as long as you are using the same Apple ID that you bought it with. Did you try downloading the music again?
Am I understanding what it is that you want to do? If I am understanding you correctly, you will find this to be useful.
Downloading past purchases from the App Store ... - Support - Apple
I admit that I'm a little confused by your remark about being logged into your iPad account. You should be logged into your iTunes account.

My iPod won't charge on a wall charger, only on the computer. I used the same cord for both though. I used to be able to charge it with a wall charger, but now suddenly I can't. I've even used other wall pieces. Nothing seems to work.

My iPod will no longer charge with a wall charger, only the computer. I know it's not becuase of the wall piece or my cord, since I also use the same cord for computer charging, and the wall piece seems to work with others devices. It worked a couple of weeks ago, then suddenly quit. I think it may be something to do with the inside of my iPod where the charger goes. I find it really inconvient to always have to use the computer to charge my iPod. I believe I have a three year warrenty on my iPod, but I wouldn't think it would cover this problem. Is there anything I can do to fix it?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. Bring the wall charger
Apple Retail Store - Genius Bar
If you have a three-year warrany it is not from Apple. The standare Apple warrantyis 1 year and y can purchas an extended warranty that give y a total of two years. You can check your Apple warranty coverage hee:
Check Your Service and Support Coverage

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

you need a lr serial for mac. the serial number for pc and mac are different.
you can download a trial lr 4 for your mac but you need a mac serial number to install.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?

can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?
This question was solved.
View Solution.

You know, this is just a thought. I'm not sure the differences between the iq526 and iq770, but as I was looking around I found this article. I don't know if it'll help, but you might want to take a look. Evidently someone figured out how to use the HP touchsmart as an external monitor for his Dell laptop.
GeorgeFN
I work on behalf of HP.

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

HT3728 I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

Using the 23" HD for only monitor for Macbook

Similar Messages

Maybe you are looking for