Using the 6500c with HP iPAQ

I need to use the modem from the 6500c to connect to the Internet with the iPAQ.
The correct parameters are entered on the telephone which work with a telephone from Ericsson.

The Bluetooth settings on the iPAQ are
General Profile default
Accessibility Name WM My Name
Address 00:121:31:CA:80
(Use PocketPC device name for Bluetooth
Accesibility Allow other devices to connect
- Paired devices only.
Services File Transfer; Info Exchange; Serial Port; Personal Network Sever.
Service Settings Enable Service On
Authorisation req. On
Authentication(passkey) req . On
Encryption required. On
Switching on Bluetooth the iPAQ I see that I have contact with the 6500c. I have set the parameters for a connection with SFR which uses the channel *99***1# (given by SFR and which works with the Ericsson but using *99***3#) I have then added the dial-up modem command AT+CGDCONT=1,"IP","websfr"
I have spoken both with SFR and Nokia (Service Centre,) and no one has an idea on how this problem can be resolved.
It appears that there is a lot of interest with the same problem on the 6500 slide.
Thanks for your help

Similar Messages

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
Thanks,
David

wjosten wrote:
Phil0124 wrote:
I doubt the phone is locked to GCI in any way
Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
Fact is your post won't help the OP.
And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?

I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?

x

I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

I cannot read or write I have been using the iPad With the accessibility icon Is there a video to help teach me To learn how to use this accessibility more efficiently

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card.

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
Personal info removed to comply with the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

HT204291 Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Help! I cannot see the Airplay symbol on any of my devices anymore! I have tried following all guides and troubleshooting, but to no avail. Just cannot use the AppleTV with any of my devices.

Thanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
Thanks

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, I can't use outlook else where, is there any way I can reset the settings in order to be able to use outlook every where?

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, outlook won't work out of office, is there any way I can reset the settings in order to be able to use outlook every where?

I can see my folders by clicking the X next to my name on the Inbox Folder. So I have my folders now, just cannot see them in the left colum or see multiple windows on Outlook. At this point, I can use the folders, just with limited functionality. Thanks -Gina

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Photo shop is not allowing me to use the "Intersect with current selection"

Photoshop is not allowing me to use the "Itersect with current selection" marquee. (The "UNION" between two selection marquees.) When I press the [Shift] + [Option] keys while dragging on a first selection marquee, this just creates a new selection and removes the old selection. I have also tried using the "intersect with selection" icon which is not working either.

Lack of experience possibly'.
To get the 360 degree scroll you need to be 'zoomed in' closer (than 1:1) to a picture or web page so that it is too large to fit on your screen.
As you know, with Windows you need, at all times' to scroll the bars at the bottom and/or right of the screen to move the display around (a little like an altazimuth telescope is manouvred). Also, if you accidently leave the scroll bar when dragging, the screen immediately snaps back to where you started from rather than knowing how far down you got before your cursor moved off the bar (if it did). You are certain to know what I mean.
If you are similarly 'zoomed in' to a picture on your new Mac, you don't necessarily need to click and drag on the scroll bars at the bottom (or right) of the window, or use the scroll wheel to move the screen vertically. With your Mac, when zoomed in to a greater than 100%, the mouse allows one toscroll 360 degrees with the mouse - not just vertically. But the picture (or web page needs to be zoomed in somewhat - i.e. greater than 1:1)
With Web pages in Safari and any other Web Browser (with the possible exception of IE with which I have had no experience with sometime before 2002 and I have only 'heard' that it doesn't work ), if you use the keys 'cmd and '+" together.
At he end of the day, you just need to keep exploring your new Mac and have fun finfing all the added extras for yourself.
(There's do many little treasures, it just gettng the time to find them all, in my experience.)

I want to use the iphone4 with local GSM providers in Nigeria

I have an iPhone4 which I bought as a pay-as-you-go from O2 in England (UK). But now I have moved to Nigeria. I want to use the iphone4 with local GSM providers. How do I go about it? Please help.Thanks.

You contact o2 as they are the only ones who can unlock the phone for you.

I have an order iPod classic (2007). I also have a Boise docking station. I can use the ipod with earphones

I have an order iPod classic (2007). I also have a Boise docking station. I can use the ipod with earphones or the computer however there is no sound when placed on the docking station. I don't believe it is the docking station as it is never moved, only I use it (older and single). Could it be a setting? Help

iPods, iPhones, and iPads aren't tied to one particular iTunes accout/Apple ID. So there are no special instructions to follow to allow you to sync it with your newer account. Simply sync it as you would your iPhone 4.
B-rock

Using the 6500c with HP iPAQ

Similar Messages

Maybe you are looking for