Using the A1016 Wireless Keyboard with Windows

Question

So, this isn't a question, it's more like a 'For What It's Worth'. I found some bad information in some archived posts here, and it seems I'm not allowed to resurrect them lol.  Anyway, the rumor on the forum is that this old keyboard won't work with Windows 7, 8, etc., but that is just wrong! 
http://www.silly-science.co.uk/2012/06/05/pairing-apple-1st-gen-keyboard-a1016-w ith-windows-7/
1) First, have another functioning keyboard hooked up to your PC, in such a way that it is fully operational as an input device for said PC.
2) Batteries in your wireless keyboard are good, right?
3) Slide the switch on the keyboard to 'on'.
4) Go into the Bluetooth control panel in Windows and if the keyboard shows up as a device, hit the connect button.
5) ** Here's the new part ** on your wireless keyboard, type 1 2 3 4 [return].
6) Now Windows will prompt you for a code. Type 1 2 3 4 [return].
Yay! I typed this on a homemade Windows 8.1 PC using my antique Apple Wireless Keyboard A1016. Serenity.

Answer 1

Success! I finally got the older, plastic, white Apple A1016 Bluetooth Keyboard to work on Windows7. I have tried several attempts and multiple days and dont remember the exact steps but I wanted to let folks know the general steps and patience in making it work. You will likely have to try many many times to get it working.
-First, stabilize your Windows BT device drivers i.e., make sure your bluetooth driver works with another device such as a BT mouse. This way, you know your BT driver is working correctly in Windows 7
-Turn on the A1016 power switch until it starts to blink. On your BT menu, click "Add Device" or something equivalent.
-Once it detects the A1016, you can right click on the BT KB icon. I noticed that the first tab did not display the "HID Device" check box option but the 2nd tab, allowed me to change the name of the KB. It is fine if you do not see the "HID Device" check box, as suggested by other sites.
-Click to Connect --- this is where I spent multiple days to get it right.
-It may or may not display a page where it asks you for a pairing code and sometimes, a screen just disappears in a flash. I got multiple pages where I was asked to enter a code (and then failed to connect), got to a page where it asked if I wanted to enter my Code or System generated (also failed to connect) but finally I got to a point, when I hit Connect or Next, it just stayed on the same page (as though nothing is happening), except that is says "Connecting"
At this point, enter "0000" or "1234" or any series of #s on an existing/usb or wired keyboard. Immediately enter the same "0000" or your choice of #s on the A1016 and hit return. Success!
I have spent countless days googling suggested steps and have seen all the problems that others have described but entering on the wired keyboard and then entering the same code on the A1016 was the step that made it work. I liked the look and feel of the A1016 hence I spent an enormous amount of time to make it work but I am glad I did.