Using the Adjstment brush in camera raw cc,

Dear Adobe
When using the Adjstment brush in camera raw cc, there is a lag before it paints, any reason why? never use to??
Chris Jones

Moving to camera raw forum.
Regards,
Romit Sinha

Similar Messages

Using the preview button in camera raw

Im learning to use camera raw via an online tutorial.
The tutorial explains that the preview button can be toggled on and off to show before and after of changes made in each adjustment panel, and then by going to the presets or snapshots panel I can toggle the preview button to show before and after of all adjustments made to the image.
However, while this is working for adjustments in the right hand panels - e.g. basic/detail/grayscale etc, when i make an adjustment in the top left and panels e.g. adjustment brush/gradient filter etc and return to to the presets panel and switch the preview P key on and off, these adjustments remain. I would like to be able to preview before and after all changes made to the image - which is what the tutorial is telling me should happen.
Any suggestions please?!
Thank you

Check out this very long thread on this subject:
Preview Button!!!!

How do you make the colour tone of the adjustment brush in camera raw white?

I am using Camera Raw (Version7.0.0.308) in CS6. The adjustment brush does not have a slider for the colour tone but jumps from blue to yellow with the +, - keys. How do I set it to white? Currently all my adjustment come out either with a yellow tone or a blue tone.

Hi,
I would update to camera raw 7.4 and install any other updates that show when using Help>Updates from within photoshop cs6.
Then check if you have the same issue.

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.?

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.

Well, it worked fine for me as well for the past couple of years. I had not had any problems using it for the past few years. I use a Mac OS X Yosemite. As far as I can tell nothing had changed. I had not added any new updates, and a week ago the adjustment brush in camera raw simply ceased working. Everything else in camera raw works. However, the adjustment brush is a critical tool. I have checked my permissions, and even repaired my permissions with no results. Of course I have also tried several restarts to no avail.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

What operating system are you using?
Which version of camera raw do you have in photoshop cs6?
After you select the Adjustment Brush, the New button should already be enabled.
Then after you draw on an area of the image, the Add button should be enabled, with the option to choose either of the other two buttons; New or Erase
Could you post a screenshot?
Maybe all the adjustment values are set to zero?
(at least one needs to have a value other than zero)

Will LR get the new brush feature added to the graduated filter and radial filter like the latest version of Camera raw?

Will LR get the new brush feature added to the graduated filter and radial filter like the latest version of Camera raw?

OK, at least I can look forward to it and use Photoshop & CR instead of LR for these filters until then.
Thanks

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

See for yourself which version of ACR is needed for that camera’s RAW files
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
then check your version (Photoshop > About Plug-In > Camera Raw).
Your version of Photoshop does not support that version of ACR.
You could use the free DNG Converter.

Why are the jpgs that are generated in my camera better than the ones i create from the nef file in camera raw?

i shoot raw+ jpg in camera, for some reason the jpgs that come from my camera (nikon D300) always seem better than the jpgs i create
from the nef files in camera raw. i am saving at the highest quality. the jpgs from the camera seem to have more detail in highlights
better color more vibrant, sharper. could my camera be doing some enhancements to the jpgs before processing?

I had similar thoughts back when I first started shooting raw. Really, it's just a matter of editing to your personal taste.
Yes, that camera applies lots of presets before creating the jpeg, as Trevor.Dennis mentioned. Also, as he said, you can far surpass native jpegs with raw.
If you need it more vibrant, make it so. If you need to bring down the highlights, do so. Need sharpening? Apply some.
Here is one of my edits that I made a tutorial of: Sunrise Raw File Edit - Adobe Lightroom - Landscape Photography - YouTube. It is one of my less dramatic edits, but still a good one.
I don't want to clutter this thread with links, but if you take a look at my Facebook page, I put a lot of before and afters up in January and February. A Google search for Benjamin Root Photography will bring it up.
I shoot in raw, and highly recommend it.
I'll leave you with a nice NEF RAW file before and after:
BTW, D300 is a nice camera, I've used it...
Benjamin

I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download said it was sucessful but I still can not import photos.

I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download said it was sucessful but I still can not import photos.

Lightroom doesn't use the Camera Raw plug-in. So downloading the latest Camera Raw didn't do anything at all for you. The only way to update or upgrade Lightroom is to obtain the latest version. If you have Lightroom 4 then the last version of Lightroom you can have at no additional cost is Lightroom 4.4.1. If the camera you are using requires anything newer than what is supported and that version of Lightroom then it will require an upgrade to Lightroom 5.

I need to know the file location of Camera Raw within PS CC.

Would like to the know location of Camera Raw .8bi file within PS CC. (.../Program files/Adobe/. . . . ???) Also, the location of the compressed download of PS CC updates would be helpful. Using Windows 64 bit vers.
Thanks

On a 64 bit Windows system, for Photoshop CC:
64 bit Camera Raw plug-in:
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\Camera Raw.8bi
32 bit Camera Raw plug-in:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats\Camera Raw.8bi
I don't know if there's a special place for downloads; I'd suggest checking the TEMP folder.
-Noel

Using the Adjstment brush in camera raw cc,

Similar Messages

Maybe you are looking for