Using the Ago Function

Hi,
I have a time dimension with levels AllTime, Year, Month, Week, Day. I set the chronological key to the day and created an Ago Measure in my fact. The repository global consistency was successful. However when I used it in answers, I got the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22040] To use AGO function, the storage level of the query ('[DIM_DATE.DIMENSION_KEY]') must be a static level. (HY000)
SQL Issued: SELECT DIM_DATE.CALENDAR_YEAR_NAME saw_0, F_TEST.MEASURE saw_1, F_TEST.YearAgoMeasures saw_2 FROM WMS ORDER BY saw_0
Does anyone have any idea please? Note that the DIM_DATE.DIMENSION_KEY is the primary key of the time dimension table.
Thanks a lot
Marija

Hi Wildmight,
I restarted everything and got the "must be a static level. (HY000)" error fixed. Then I checked the chronological key in the level "year" but it seems not to be working. It's taking a long long time to show the results (I finally cancel it).
Reviewing the nqquery log file, I don't really get how obi retrieves the todate info, it uses the analytic function: ROW_NUMBER() OVER (partition by....), do you get the same?
Thanks again.

Similar Messages

How to calculate the measure for the next month using the AGO Function

Hi,
I need to calculate the measure for the current month and the next month.
Can anyone please let me know the syntax to use AGO function for the above requirement.
Regards,
Ambika Nanda.

Hi.
You can also use Oracle analytic functions LAG and LEAD inside the EVALUATE obiee function. The second one will give you the next measure.
For example the report is:
TIMES.CALENDAR_MONTH_DESC
SALES.AMOUNT_SOLD
LAG column: EVALUATE('LAG(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
LEAD column: EVALUATE('LEAD(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
And the result is:
CALENDAR_MONTH_DESC--------AMOUNT_SOLD--------LAG--------------LEAD
2000-01----------------------------------8025513.84---------------------------8474475.88
2000-02----------------------------------8474475.88----- 8025513.84-----7439568.24
2000-03----------------------------------7439568.24------8474475.88-----7062040.48
2000-04----------------------------------7062040.48------7439568.24-----7497971.40
Regards
Goran
http://108obiee.blogspot.com

How to use the AGO function to calculate the sum of the last 12 months?

year     |     month     |     amount
2009     |     01     |     100
2009     |     02     |     150
2009     |     03     |     120
2009     |     04     |     110
2009     |     05     |     155
2009     |     06     |     180
2009     |     07     |     105
2009     |     08     |     145
2009     |     09     |     200
2009     |     10     |     205
2009     |     11     |     150
2009     |     12     |     120
2010     |     01     |     225
SUM OF THE LAST 12 MONTHS OF 201001=>225+120+150+205+200+145+105+180+155+110+120+150     *1.865*
How do I do this? Could anyone help me?
Thanks.

hi,
Create a dummy column in Fx
Use *Filter ( amount_col using date col= TimeStampAdd(SQLTSI_MONTH, -12 ,date_col)*
If u want to show at grand total level
Go with combine with similar request
same as u mentioned (1st criteria)
date_col, month, use the above formula (2nd criteria)
try this and let me know
Thanks,
Saichand.v
Edited by: Saichand Varanasi on Oct 7, 2010 7:27 PM

NQSError: 22047] The Dimension used in AGO function must be referenced

Hi All,
I am selecting the following columns in the report:
1. Dimension.Product
2. Sales: Directly mapped to physical datasource
3. Prior Month Sales: calculated using the AGO function at the Month Level
4. Var from Prior Month : Sales - Prior Month Sales (Calculated at the Logical Level)
Time Dimensional Hierarchy is Year > Quarter > Month
I am getting the data for the same but when I apply Grand Total is throws the error:
nQSError: 22047] The Dimension used in AGO function must be referenced in the query. (HY000)
When I use the filter for the Month filed it is coming up fine but when I remove the month filter and apply on Year it doesnt work.
Can anybody please let me know how this works?

This error is happening in request?
You have to apply filter MONTH because you are calling month in AGO function. Try to create YEAR AGO calculation and then try combining filters, you will see that then YEAR will be important, not month.

On the AGO Function need to Create TODATE function with Diff levels - MTD,Q

Hi All,
My Basic Requirement is to Create Time Series Function on AAA ie ( Month To Date , Quarter To Date and Year To Date )
The Logic for the AAA = XXX / Previous 3 Months Revenue.
we know that we can use the AGO Function to create Previous 3 months Revenue with Month is Level . But the issue is .... i cant use AGO function since i need to perform Year to Date, QTD and MTD upon 'AAA' this OBIEE doesn't permit to use nested time series functions upon varying levels .
So How can i Resolve the issue ie creation of TODATE function on the AGO Function with Diff levels
Thanks,
Swapna S

hi,
for your requirement create three repository variables like
for previous 3 months create repository variable like
select to_char(sysdate,'yyyymm') -3 from dual;
for month to date first calculate first day of the month
select To_Char(Add_Months(Last_Day(Sysdate),-1) + 1,'MM/DD/YYYY') from dual;
after put a filter in answers date between first date of the present month and current date
create the same thing for year to date
calculate first date in the year like following query
select To_Char(Trunc(Sysdate,'YEAR'),'MM/DD/YYYY') from dual;
after that apply filter date b/w first date in the year and current date
i hope it works for your scenario
Regards
Naresh
Edited by: Naresh Meda on Nov 10, 2008 2:08 AM
Edited by: Naresh Meda on Nov 10, 2008 2:12 AM

In iPhoto, how can I find a particular event using the search function?, In iPhoto, how can I find a particular event using the search function?

In iPhoto, how can I find a particular event using the search function?

NO - read my last answer over a year ago
That is because iPhoto is all about photos - not about files
You do not access the piles in iphoto - you access the photos using either iPhoto or the media browser - see this user tip for photo access details
LN

How to use the Table Function defined in package in OWB?

Hi,
I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
Any one can explain it, how to resolve this problem.
Thank you,
Regards
Gowtham Sen.

Hi Marcos,
Thank you for reply.
OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
For exampe say sample_pkg is a package. say a function is defined in a package.
then we call that function as sample_pkg.functionname(); This is not a stand alone function.
I hope you understand it.
owb supports stand alone functions.
Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
Here I would like know, is there any other way to use the table functions which are defined in a package.
Thank you,
Regards,
Gowtham Sen.

How do I use the print function to output a numeric variable with a fixed amount of leading zeroes

I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string. For example if the variable is 12 the output should
be 012 and if the variable is 3 the output should be 003.
Presently the syntax I am using is PRINT STR(@CLUSTER,3) . But if @CLUSTER which is numeric is less than three characters I get spaces in front.
Please help!

>> I need to create an output from a T-SQL query .. <<
NO! NO! In RDBMS, we have a presentation layer that handles displays. We do not ever do it in the database. This is fundamental. But more than that, the purpose of PRINT is for debugging in T-SQL and never for output.
You are still writing 1960's COBOL or BASIC, but you want to to it in SQL. You probably picked the wrong data type (a numeric that should be a string) and are trying to repair your design error.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the CMS functionality in Sun Portal Server 7.2

Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
Srikanth

Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps!

How to use the divide() function in bpel

Hi All,
How to use the divide() function in bpel.
pls can u give the one sample example

2 div 4
Eg;
<assign name="Assign_1">
<copy>
<from expression="2 div 4"/>
<to variable="outputVariable" part="payload"
query="/client:testProcessResponse/client:result"/>
</copy>
</assign>
--Prasanna

How to use the pps function from JCOP?

Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
 readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
 //If no readers has a card it ends the process
 if(readers.isEmpty()){
 System.out.println("\nNo card in the reader...");
 return;
 System.out.println("\nReader Type: "+readers.get(0).toString());
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
 } catch (Exception e) {
 e.printStackTrace();
 System.out.println("ATR: "+toHex(atr.getBytes()));
 //sending a data 11223344
 System.out.println("\nsending data: 11223344");
 byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
 System.out.println("Response data is:" + toHex(responsesend));
 //close terminal
 term.close();
 System.out.println("\nTerminal closed");I've got this output on the console:
StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
Protocol and parameter selection not supported by this terminal!
 at com.ibm.jc.JCTerminal.pps(Unknown Source)
 at com.test.essai.main(essai.java:46)
>
And If I take a look at the data exchanged with the card:
Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM

-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 System.out.println("ATR: "+toHex(atr.getBytes()));
 jcard = new JCard(term,atr,0);
 jcard.reset();
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
 } catch (Exception e) {
 e.printStackTrace();
 }The same pps is always send after each reset...

How do I find out what year my MacBook Pro is? I want to know if I can use the mirroring function with my Apple TV if I download Mountain Lion.

I'm trying to find out if I can use the mirror function to look at large construction drawings using my Apple TV. It says that my MacBook Pro has to be early 2011 or newer and I can't remember what it is.

Mactracker - Get Info on any Mac

Using the Ago Function

Similar Messages

Maybe you are looking for