Using the Assets panel [was: The most basic stupid question on here]

I am very new to web design, self taught on sites like GoDaddy and Microsoft Office Live, but there's no access to root directory and adding affiliate banners won't work. So here I am. Problem #1 so far is how do I get stuff into my assets. I've messed around for a while w/ no success. It can't be that hard. Someone out there please give this "newbie" the instructions for getting text, images and stuff from my computer into the assets box on Dreamweaver. I'll have nightmares about "dreamweaver" till I get this figured out. Thanks a million in advance for answering such a basic (almost stupid) question

There are no stupid questions around here, but a more descriptive subject heading would be appreciated in the future. "Assets Question"
Define a Local Site folder In Dreamweaver. Without this critical first step, DW cannot manage assets for you.
Start by working through this tutorial. Lots of good info.
Creating your First Website in DW C4 -
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Similar Messages

How to make a photo STAY in the assets panel for future use for In browser editing?

How to make a photo STAY in the assets panel for future use for In browser editing?
When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

Sure ... right mouse click on your page and choose 'Exclude Page from Menus' :-)

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Where is the Assets panel

I get this error message when I open MUSE. "This document contains 2 links to assets being upsampled . You should resize them smaller or right-mouse click on the assets in the Assets panel to see additional options.

Thanks. As soon as I posted the question I looked at the different
categories and found it being the panel to the right with all of the different
features.
In a message dated 9/18/2013 2:31:17 A.M. Pacific Daylight Time,
[email protected] writes:
Re: Where is the Assets panel
created by Gaurav Sharma (http://forums.adobe.com/people/Gaurav.S) in
Help with using Adobe Muse CC - View the full discussion
(http://forums.adobe.com/message/5692034#5692034)

I can't see the thumbnail in the Assets Panel.

I have downloaded the newest version of PE 12 and when I download the AVI files into the assets panel, they appear, but appear black and not as any thumbnail that I can identify when trying to do my editing. I can view them in the timeline and they play just fine, but I have a lot of clips and I can't sort through the ones that I want to use if I can't identify it in the panel. All of the other clips show up just fine, but these AVI files (mpeg2) won't give me the thumbnail view that I need. I'm using Windows 7. Any ideas?

lugeman13
We have a lot to sort out here. Your information has been very helpful but still some gaps.
1. When you look at the file on the computer hard drive (before it ever see Premiere Elements, what is the file extension, .mod or .avi?
2. When these video were originally recorded by the JVC camera, were they recorded as mod 4:3 or mod widescreen 16:9?
3. Mod standard and especially Mod standard widescreen have been highly problematic for Premiere Elements (any version). Is there any chance that you or someone else could have been trying to convert these files to something else and that the something else might be the problem now?
4. Would it be possible for you to post a screenshot of the Properties readout that you get for the file when you right click its thumbnail in Project Assets and select Properties?
There have been two classical remedies for .mod file
a. standard or standard widescreen, rename the file extension from .mod to .mpg before file import into Premiere Elements
and
b. for mod standard widescreen, use Premiere Elements Interpret Footage to correct the 4:3 look for the intended 16:9 video
More on those matters later.
We will be watching for your follow up.
Thanks.
ATR

NO MORE INFORMATION IN THE ASSET PANEL

I don't have anymore information when my mouse go to over an asset in the asset panel. Only the name of the file. No more information about original asset size, resampled size and so one.
I just have a yellow box with name of the asset.
Is it the new version? Do I have to enable someting?
ps:apologize for my English...!!!
Michel

Hovering mouse over the icons (as indicated below) should give you the required info. Is it not the case with you?
Thanks,
Vinayak

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

How do I safely get the side panels of the printer off

How do I safely get the side panels off the printer. I am attempting a repair and do not want to break them

The thin strip is called the encoder strip. It has very fine lines that are used to keep track of where the carriage is as it moves across the paper. You should not need to remove the sides to replace this, but it can be a bit tricky. The post here may help. Be sure the encoder strip is properly threaded through the sensor at the back of the carriage.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Where is the Components Panel and the Design Mode button in FlashBuilder 4.7 Premium?

I'm new to FlashBuilder. I've been using many years just Flash and now I'm switching to FlashBuilder. I've seen some tutorials, but the Interface in my copy of the program do not match the one in the tutorials. I could't find the componets Panel and the Design Mode button. Any ideea why?
My Laptop runs on Windows 7. FlashBuilder 4.7 Premium is via Creative Cloud:
SnapShot from Tutorials I've seen
SnapShot From my application
with yelow i've marked the place with the "Components View" and the "Design" mode button
whith that red line I've marked the place where the "Design" mode button is expected
I've notice the following menu:
Whe you click on Views: Window->Show Views->Other... an interactive dialog appears with the tree of views available. Above there is a textField where you can enter a filter. As you type the text, the tree updates accordingly, after each letter.
I've searched for the Components panel ... surprise!!!
nothing on filter
filtering for Outline View
filtering for Component View
the tree complete
the tree finds the Outline View
the tree is already empty
As you notice the list of views is empty even before I finish the spelling of the word "Component".
Is there something I should configure, or this feature is not available in this particular distribution ?

I found the answer myself. Looks like this new version does not support these features anymore: http://www.adobe.com/ro/products/flash-builder/buying-guide.html.
Strange...
The question rising here is what happens with this feature?
Will be available with a future update?
Will no longer be availalble in FlashBuilder, but in another Adobe Project?
Will never be available?
I belive this features are not important for advanced users... but I'm just learning this. I'm used to work in Flash. I write ActionScript, but I'm not familliar with the objects availlable in Flex, so the Component Panel and Design Mode is quite handy on this stage.
Plus, there is a real concern about the future of this technology, now beeing available HTML5. So, there is a question of oportunity investing time in learning things no longer supported. The most frustrating thing is not having an answer to this question. Even a "No" is better than "We don't know yet" <- the answer I received from online support.

Using to Asset Panel links to 'Poin to File'

Hi,
In the properties panel, when I create a link, I can use the "Point to File" icon, (to the left of the Src), and click&drag the cursor to a file on the FILES panel and by so create the link.
When I try to click&drag to the Assets panel nothing happens and no link is created.
Is there a way to enable the “point to File” link for the assets panel as well?
When I add my favorites to the Favorites panel it would be convenient to link to it as well.
Dan

Assets panel is nothing more than a list of the assets used in your site. It doesn't respond to "click & drag."
Add links directly via the link field on your properties panel. If you hit the down arrow, you'll see a list of recent links in the history folder. If it's a new link, hit the "browse" icon to find the file.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Transaction type to dispose the asset only for the depn areas 01 and 02

One of the Company codes XXXX plant XXXX has an isuue for asset # XXXXXXXXXX-0 this asset was partially retired in Nov.2008 and now its acquisition value is JPY312,428
which should not be an asset under US GAAP but qualify for asset under Tax book . So it needs be removed from US and JCC book(01 and 02 area) but keep the record on the Tax book(area 15).
Is there any transaction type to dispose this asset only for the 01 and 02 area but keep the historical data for 15 area?
Thanks for helping in advance

Can I suggest you a way to handle this? Just give a try and see whether it works for you or not.
Post a Credit entry to the Asset only to the area 01 and 02. Please follow the below steps before you do this.
1. Go to main SAP screen => System => User profile => Own data => Parameters
Add parameter ID FAA_FB01_AREA_SWITCH (Turn On Value Entry at Area Level for FB01) and mark "x" against it in Parameter value. Save this changes.
2. Go to F-02, Enter the Asset number (posting key 75 and transaction type 105, which ever you feel like) and then in the next screen, enter the amount. Here in this screen, you will find a tab named area values. Click that tab and change the values Area 01 & 02 to $0.01 and leave the Area 15 as it is. Enter the appropriate dr line item and save the document.
3.Go to AW01N and see tha values against each of the areas.
please revert in case you have any questions.

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Try the Parser VIs (also known as LV Mathematics VIs, or simply GMath VIs) located under the Analyze>>Mathematics palette (not in the Base package). You might want to start with the "Eval Formual Node.vi" located in the Analyze>>Mathematics>>Formula palette. There are many differences between these G-based, dynamic formula VIs and the LabVIEW formula node, but these VIs often prove quite useful when your formula changes on the fly. For more detail on the differences, see the LabVIEW Help file (Cntrl-Shift-? from within LabVIEW) under the topic "Mathematics VIs, parser differences with Formula Node".

Using the Assets panel [was: The most basic stupid question on here]

Similar Messages

Maybe you are looking for