Using the 'backup playlist' facility in iTunes

Prior to discovering the above facility, I used to copy each mp3 file into a folder on my desktop and then burning a CD. Using the above is much easier but it also backs up the podcasts that happen to be in iTunes at the time. Is there any way to exclude podcasts when executing the backup?
Also, can I use the 'backup' to load my laptop?

Using the 'backup playlist' facility in iTunes
Note that it's Backup - iTunes library (music, videos, podcast and audiobooks) and playlists (the lists of songs).
If you backup/save a playlist, there is no music saved.
Is there any way to exclude podcasts when executing the backup?
No.
can I use the 'backup' to load my laptop?
Yes.

Similar Messages

  • Have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    Because ratings don't travel with the files or the playlist.
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • Can i have 2 Apple IDs using the same playlist from the same pc?

    can i have 2 Apple IDs using the same playlist from the same pc?

    Easiest way is to create separate computer logins with all your own info including your own iTunes library.
    I recommend each individual not have more than one AppleID because you will have purchases on multiple accounts 
    You can use more than one AppleID in an iTunes library.
    AppleID/iTunes =used for purchases.
    iTunes library = iTunes and all media on your computer.

  • I did an icloud backup on my old 4S with iOS 8.3 and wanted to install on my new iPhone 6 but it only has iOS 8.1.3! Can I do/use the backup after I chose "install as new iPhone"?

    I did an icloud backup on my old 4S with iOS 8.3 and wanted to install on my new iPhone 6 but it only has iOS 8.1.3! Can I do/use the backup after I chose "install as new iPhone"?
    Because I cannot update the software until I chose if I want to begin with a new phone setting or download a backup.
    But the backup is of course not compatible with the old iOS.
    So will it be possible to get the new iPhone going, then do the software update to 8.3 and then download / use the data from
    my 4S icloud backup?

    1. Settings > General > Software Update > Update the  to 8.3
    2. Settings > General > Reset > Erase All Content & Settings
    3. Reactivate phone and follow prompts to restore iCloud (or iTunes) backup.

  • HT1766 I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    Connect phone to computer.
    Select Restore.
    Tell iTunes which of the available backup files to use, let iTunes restore it.
    Also, try reading the User's Guide as it answers questions like this.

  • Cannot Open A Library File Using the 'Option' key When Launching iTunes

    I found that when I tried to open a different iTunes library file then my default by using the 'option' key when lanching iTunes that the iTunes Library file was greyed out.
    I looked in the previous Library Folder and noticed that the old file had the extension .itl.
    My solution was to add the extension .itl to the end of the of the file name of my iTunes Library files and things then worked when launching with the 'option' key. As an example 'iTunes Terry Library' became 'iTunes Terry Library.itl'. I applied this to all my iTunes library filles and all is well. Of course make a duplicate of the file you are going to change so you have a backup file.
    I am using iTunes 10.4 and Sno-Leopard 10.6.8.
    MJ

    No, choose library works in Windows. The thread you linked to suggested that, on OSX at least, iTunes now behaves like almost every other application in that you can open a data file associated with the application and it opens that data file rather than a different one it had opened in the past. I was hoping things might have actually changed.
    In short, holding shift or option while launching the app is a very clunky way of opening an alternative library given the standard behaviour of the GUI where "opening" a data file normally opens the application that can work with it.
    tt2

  • I have a new computer and I am not able to use the $12.58 in my itunes store acct.

    why am i not able to use the $12.58 in my itunes acct to purchase items - I am using a new computer and it requests the code on the back of the itunes gift card which I no longer have available but Itunes is telling me I still have that amount in my acct.

    You don't have a copy of it on your backup of your downloads and you've checked your computer's hard drive for it ? What you can re-download will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If other films show there but not that one and it's still in your country's iTunes store then check to see if it's hidden : http://support.apple.com/kb/HT4919
    If it's not hidden and it's still in your country's store then you can try contacting iTunes Support and see if they wil grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or album.

    With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or even the album sort order (for example when adding 2 albums stored in a unique folder). Anyone has any ideas ? Been stumped for a while....!!!

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    iForgot.com

  • Good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should ap

    good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?

    ?

  • Can't use the remote app to enter itunes password on apple TV

    the remote app on my iphone and ipad work really well as a remote control for my apple tv, however if I use the app to enter my Itunes password (typing it on the keyboard)it won't recognise it and I have to use the apple tv remote instead, any ideas?

    Don't have an answer, but this guy http://tidbits.com/article/12126 says you can do it, but doesn't explain how. I would love to know - using YouTube on Apple TV is a complete pain cos you have to enter your search terms using the Apple Remote and it takes forever.

  • I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time con

    I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time consuming for me, so I finally investigated a bit further.
    I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased!  But when I tried to do the same with the other laptop, it failed. 
    What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc.  And yes, I did upgrade the old laptop to the newest iTunes version.
    Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
    My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available."  The newer one  a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
    Both are using the same version of Snow Leopard--10.6.8.

    I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time consuming for me, so I finally investigated a bit further.
    I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased!  But when I tried to do the same with the other laptop, it failed. 
    What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc.  And yes, I did upgrade the old laptop to the newest iTunes version.
    Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
    My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available."  The newer one  a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
    Both are using the same version of Snow Leopard--10.6.8.

  • I forgot the backup encryption password in iTunes how can I get my backup data back?

    I forgot the backup encryption password in iTunes how can I get my backup data back?

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (109920)

  • What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

    What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

    Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

Maybe you are looking for

  • Issue with UTL FILE, does not read directory path

    Hi Guys I have created a procedure using a UTL_File, but when I execute that procedure, it comes with an invalid directory path. create directory r_bmw as 'C:\BMW'; grant read, write on directory r_bmw to bmw; The above have been created successfully

  • Cost Center wise goods issue report

    Hi, Is there any standard report to see the stock of materials based on cost center. I tried MB51 & also put costcenter field in that report. But when i am running the report it is not showing against cost centers. It is showing against mov type 201

  • DTP Full/Delta loads

    I am loading data from one DSO to another. The change log of the source DSO has been deleted for any request before 20 days. I want to do a full load from active table and then start the delta loads from change log. But the problem is the load is pic

  • My About:Config settings aren't being saved

    So when I type in the URL bar, it shows, Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.properties(search text) so I go to about:config and reset the keyword.url, but ea

  • How many listeners can a instance register with?

    when we create a second listener, we must register it using the following commands: sql>alter system set local_listener='list2'; sql>alter system register; But, after this, will the first listener still registered? and do we need to set the local_lis