Using the bluetooth feature in my car

Is there any way to use the provided ear buds microphone in my car to change the current song? Currently, if you plug the earbuds into the microphone jack it cancels the built in speaker and pauses the bluetooth. Any suggestions? Thanks in advance,
Greg

Thank you for the response.
This happens when I am driving, and my wife, using her Iphone, accesses Google.com. Once she is on the web site, and she types in her search, it activates the phone on the Navi system, and the screen on the navi system says "talking".
I have a Blackberry, and it is also paired with the car, but we make sure only my wife's Iphone is connected when the happens.
THANK YOU!

Similar Messages

  • HT6154 when I had my Iphone 4s i was able to use the bluetooth feature in my car now but now that I upgraded to the IPhone 5s I can not do so can somebody please help me

    once I upgraded to the Iphone 5s my chevy 2014 cruze will no longer sync with the blue tooth can someone please instruct me how to fix this problem. I love the handsfree feature that both you and chevy offered me

    Remove the iPhone from the list of devices in the car. Remove the car from the list of devices in the iPhone. Turn Bluetooth off on the phone and reset the phone. hodl the sleep/wake and home buttons together until you see the Apple logo and release. The phone will reboot. Turn the car on and put the radio into discovery/pairing mode. Turn Bluetooth on for the iPhone which puts it into discovery/pairing mode. The two should see each other.

  • How can I install the driver to use the bluetooth feature on my ipod touch

    I am trying to pair my iTouchbluetooth with my Dell My Dell says "Bluetooth peripheral device doesn't have a driver" and "problem with pnp devices". Can someone help me?

    You can't. That is not a feature of an iPod (or iPad or iPhone)

  • Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

    Hi everyone,
    I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
    on different physical disks to have them not slow-down each other in case of intensive disk accesses.
    So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
    individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
    Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
    Thanks in advance.
    Cheers,
    Sebastian

    Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform.  Lastly, you could copy the vhd file to a different location
    before starting the VM.
    .:|:.:|:. tim
    Hi Tim,
    thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
    The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
    How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
    2x physical machines carrying severel HDDs
    8+ VMs spread to run on the 2x servers
    when setting up replication I can only set the storage-location from server A on B and vice versa B on A
    Thanks again for your reply.
    Cheers,
    Sebastian

  • I want to use the Maps feature on my X3

    I purchased a Nokia X3 two weeks ago.
    I would like to use the Maps feature for work purposes.
    According to the Nokia website this mobile has Nokia Maps preinstalled (reference http://europe.nokia.com/support/product-support/compatibility-and-download#/nokia-x3/)
    So why am I required to purchase an External Bluetooth GPS module?
    The website clearly states “You’re good to go. Your mobile has Nokia Maps preinstalled. You can now find the good places to know and the best way to go in over 180 countries worldwide.”
    Which device is compatible with the X3 handset?

    The X3 comes with the Nokia Maps software preinstalled but it does not have an integrated gps chip like some of the other models.
    You can still use the software to browse maps and plan journeys but you won't be able to use it for live turn by turn directions becuase it does not have the gps chip to tell it your current position. To do that you need to get an external bluetooth gps receiver chip such as the Nokia LD-4W. Cheaper alternatives are available from online shops.

  • How do I use the OCR feature in Acrobat 9?

    Does Acrobat 9 have the OCR feature?  If so, where do I find it?  In Acrobat 8, one would go to Document, OCR Text Recognition, Recognize Test Using OCR, OK.  I specifically want to know how to apply OCR to a scanned document in order to use the Find feature.

    Simple. go to DOCUMENT, and then select OCR TEXT RECOGNITION.

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

    HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

    There is no current panorama feature.  When iOS 6 is released (Sept. 19) we will find out.

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there.  Why doesn't it show up in the folder?

    I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there.  Why doesn't it show up in the folder?

    What system and iPhoto version are you running?
    If your're using iPhoto 9 or later  Command (right) - click on the photo in the search window and select Show Event in the Contextual menu. 
    That will take you to the event where the photo is.
    OT

  • Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

    Can I hook my iphone 5 to a touchscreen monitor and use the touchscreen feature of the monitor. Would I have to use the lighting to hdmi?

    The connection of the phone to the monitor would allow you to see, but does not have the ability to translate the touch on the monitor to the phone through that cable.

  • I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address.  Have since upgraded the e-mail addre

    I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct.  Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in.  It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me.  Any assistance would be much appreciated, Thanks

    Hi rbcjoker76, and a warm welcome to the forums!
    Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
    Required Fonts from 10.3, much the same in 10.4...
    http://support.apple.com/kb/HT2444?viewlocale=en_US
    You may have to get Pacifist...
    http://www.charlessoft.com/
    then intall the Fonts what you need from your Install Disk.
    Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

    I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

  • I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one.  Are there any aftermarket devices for USB to phone that would work in this case?

    I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

    You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

Maybe you are looking for