Using the brilliant effect with a size oscillate.
Hi,
Trying to achieve a Star Trek effect with the Brilliant particle generator. It's the flash at the end of this (http://youtube.com/watch?v=8d10vQHbZQU).
I'm trying to replicate it with the Brilliant particle and i get something strange. I added an oscillate to the scale parameter, and while it works I get some particles drifting along the y-axis? I'm not sure why it's doing this. I'm applying the oscillate to the whole group. Should I be adding it to just the particle?
Cheers and Thanks,
Jose
Have you taken a look at the Dazzle filter? You may be able to recreate that effect with just the Dazzle filter and some object opacity keying plus adjustments and key framing to Dazzles Amount and Brightness parameters.
Similar Messages
-
I have purchased a macbook air with 64 gb hard disk. the available space is only 10gb. With this available space, i can't use the system effectively. kindly advise.
You should have bought one with a larger SSD. You can regain some space by disabling the sleepimage file:
To disable safe sleep, run the two following commands in Terminal:
$ sudo pmset -a hibernatemode 0
$ sudo nvram "use-nvramrc?"=false
When done, restart your computer. Now go delete the file "/private/var/vm/sleepimage" to free up some hard drive space. When you put your computer to sleep it, should happen in under five seconds; my MacBook now goes to sleep in two seconds.
[robg adds: To state the obvious, with safe sleep disabled, a total power loss will wipe out whatever was open on your machine. To enable safe sleep mode again, repeat the above commands, but change hibernatemode 0 on the first line to hibernatemode 3, and =false to =true on the second line. You'll then need to reboot again. Personally, I prefer the safe sleep mode, even with the slower sleep time and hard drive consumption -- even if for no other reason than it's great when changing batteries on a flight.]
You can also delete unneeded files:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
i paid for the single after effects cc app and I used the same account with the expired free trial . so after paying for after effects, i try downloading it but it brings up a screen saying that i need to purchase after effects to continu
Activation Stuff
Mylenium -
How do I find and use the "Spotlight Effect" in PS6?
How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!
Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting. -
Can I use adobe after effects with my project from premiere elements
Wondering if I can use adobe after effects with my premiere elements project
drunner
What version of Adobe After Effects do you have?
Whatever the case, I have not found any Adobe After Effects documentation that include a Premiere Elements project.prel file as a supported import choice.
I suspect that you are going to have to export your Premiere Elements Timeline as a .mp4 file with a After Effects supported compression into After Effects.
But, I would ask in the Adobe After Effects Forum just to double check.
After Effects
More later.
ATR -
[discuss] Does anyone use the Timeline Effects?
Just curious. I don't, but I probably would if the effects
were better -- the system itself of applying and editing effects
works nice.I've never used the Timeline Effects either, and after some
fooling around with them I think these are the main reasons:
1) There aren't very many effects. I don't expect to discover
much there.
2) The effects that are there aren't particularly useful.
I've never really needed to "explode" or "expand" something in my
animation. Some of the effects are so basic they don't seem to
really offer any benefit over normal tweening, such as Transform
and Transition. And what about Text effects? If there were
professional text effects, such as the quality found in After
Effects, I'd find that useful.
3) The effects that exist are not very high quality. They
aren't smooth and natural looking.
4) The preview framerate is not synchronized to your movie
framerate, so the preview is mostly useless.
5) UI visibility of the Timeline Effect is really low.
There's no indication in the timeline or Property panel that a
symbol is actually a timeline effect. The only way to edit or
create a timeline effect is through a menu. This makes for a very
awkward interface.
5) You can only have a single Timeline Effect at once.
6) A Symbol with a Timeline Effect can't be edited, you can't
even adjust the frame span in the timeline without the timeline
effect being "baked" and not editable anymore. This makes some of
the "helpers" particularly useless, since it basically locks down
your selection after being applied.
So in the end I think I'll avoid extending Timeline Effects
altogether and just create some Commands to help us in creating
tweens. Any suggestions as far as that goes? -
How do I use the App store with macbook pro and mac pro
I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
I can't find anything that specifically outlines how this works.
I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro. -
i have an apple id but i have not been able to use the same id with i tune and app store..what to do???every time i m trying to login it is telling that this id has not been used with i tune and App Store ....reviewing of my id is one of the option provided to me after this...
Have you logged in and reviewed your account and entered payment details ? Unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
then credit card details will need to be entered before the account can be used to download any item from the store.
You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either have to enter card details (you should be able to remove them after entering them), or create a new account (using the instructions on the above link). -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
Can two people use the same computer with two different ipods?
I was just wondering if me and my mother can use the same computer with our ipods?
Glad you asked. Before you get rid of the old one move its iTunes Library to the new one:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
"Deauthorize" the old computer too. Go to the iTunes Store menu and select "Deauthorize This Computer..."
I hope you get a Mac this time -
It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook. -
Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?
Yes. After Windows/Bootcamp discovers your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
Then check the mouse drivers box and your device should work. (I located this solution on another thread)
It works for both the Magic Mouse and Magic Trackpad.
Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
It's Windows. -
Using the apple remote with ipod mini
is it possible to use the apple remote with ipod mini dock
advent 1318 Windows XP n/aWould the apple remote and universal dock allow remote adjustment of the volume level when using and iPod mini? I know the nano and 5g support this feature but am unsure for the mini as my old 3g ipod only gave 'line out' via the dock.
-
Using the apple remote with garageband
Can you use the apple remote with Garagband? I know there are apps that cost like iRed Lite, but are there other options?
are there other options?
the only other one i know of is Remote Buddy -
Using the MacBook Pro with external Monitor and Keyboard
This may be a dumb question, but here it goes anyway:
Can I use the MacBook Pro with an external monitor and a bluetooth keyboard and mouse without having it opened all of the time ?
I am planning to buy a MacBook for my wife and most of the time she will be using it at her home office.
I don't want her to use the computer opened all of the time when she is actually looking at the separate screen and using a separate keyboard. Having the laptop opened will only accumulate dust and reduce the lifetime of the built in screen.
What I would actually need is a kind of "docking station", but Apple doesn't make that - I know.
So can the MacBook at least be operated without the internal screen powered on while it is closed?
Thanks for your help
Martin
Message was edited by: mdoppYes - it's called clamshell mode:
http://support.apple.com/kb/HT3131
Maybe you are looking for
-
List Price Not getting displayed in B2B Webshop Product Catalog
Hello Experts, We have done all the required configuration to view the LIST PRICE in B2B Webshop product catalog. We have done following settings: 1. Pricing Procedure assignment to the PRODUCT CATALOG VARIANT 2. Initial Replication of the product ca
-
Wont install 10.5.2- has any else had this problem?
Sent computer in for repair did all the updates and only update that wont work is 10.5.2. It talks about a patch and to contact manufactor. Has any one else had this issue or suggestions? Thanks
-
GI Label Print against movement type
Hi Experts, While posting the Return Goods Issue (MVT- 202,222 & 262) document, the lable has to print in the Printer. But as per standard there is no movement type control for the lable print against the Inventory management. Can you please hlep on
-
Auto Calculate Forms when opening pdf
I have a PDF that has form boxes that I created in them. I also have an Access Database that is pushing values to these forms. The numbers are populating all of the cells correctly. My issue is that when I open my file some of the form boxes that rel
-
what do I need in order to install windows xp for autocad on my macbookpro