Using the business area as a breakdown category in BCS

Hi,
Can I use BA as a breakdown category in BCS? If so, how can I use the breakdown category while the manuel posting in BCS?
Thx.
Message was edited by: ebru soydas

Business Area may be used, but must first be included in the data model as a characteristic with the dimension Subassignments. Then the BCS Databasis must include this characteristic with the role subassignment. This will automatically make it available for breakdown categories where the values may be required, optional, and so forth.
I hope this helps.

Similar Messages

  • How to restric the use of Business Area and Plant in PTC module

    Hi Expert,
    I am facing a problem with restricting the use of Business Area and Plant in PTC module.
    In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
    We have applied same authorisation in the PTF module.
    Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
    Note: We have already inserted two authorisations object manually -
    1) F_BKPF_GSB
    2) A_IMPR_GSB
    but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
    Regards,
    Venkatesh

    Hi,
    have you done OMJ7?
    Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
    Regards

  • I am not able to see the Business area in Discoverer desktop

    Hi,
    r
    I am new to Discoverer
    I have created a business area in EUL with user name and password as dewip/dewip in Discoverer administrator and now when I am logging in to Discoverer Desktop with the same user name and password to create workbook I am able to log in but I am not able to find the Business area in the Discoverer desktop.
    After creating the business area do we need to do anything ( We don't even have save option to save also).
    In Discoverer admin -> tools-> privilages I checked to see the privilages for this user ,but I could not see this user name(dewip) only.
    Please help me ,its urgent.
    Thanks,
    gsr

    Hi gsr
    If you are working on Desktop and you change the default EUL but it doesn't stick this means that you don't have Admin rights over your machine.
    In order to make these setting stick you need to have permission to update the system registry.
    If you really cannot be given these rights then I suggest you ask you system admin to change the registry setting for you on your machine so that it reflects the correct EUL. You will find it here:
    1. From the Start button, use Run | regedit
    2. Open your registry to display HKEY_CURRENT_USER | Software | Oracle | Discoverer 10
    3. Expand the folder called Database
    4. Inside here you will see one set of settings that begin with AEUL and another with UEL. The format is like this:
    AEUL_username_database and UEUL_username_database
    5. You should see the name of the default EUL in the column called Data
    6. Right-click on the setting you want to change and from the pop-up select Modify
    7. Type the name of the EUL that Desktop should default to for that user in the database, making sure you type it in UPPERCASE
    8. Click the OK button
    9. Close the registry
    When you now connect to Discoverer Desktop you should be in the correct EUL.
    Note: this is only required if you don't have admin rights on your PC. If you do have admin rights then Discoverer will set this for itself.
    By the way, if you or anyone reading this is unsure about manually editing your registry you should back it up first. Here are the steps:
    To backup your registry, follow this workflow:
    1. From your PC, click Start | Run
    2. In the Run dialog box, type "regedit" and press the Enter key
    3. The registry will now be displayed
    4. From the registry menu bar, select Registry | Export Registry File
    5. When the Export Registry File dialog box opens, give a name to the file you want the registry to be saved as
    6. In Export Range, check "All" or "Selected Branch" - Selected Branch will export the current folder, so if you happen to have already navigated down tp the appropriate Discoverer Administrator folder you will be able to back it up
    7. Click the Save button
    8. Close the registry editor
    To restore your registry, follow this workflow:
    1. From your PC, click Start | Run
    2. In the Run dialog box, type "regedit" and press the Enter key
    3. The registry will now be displayed
    4. From the registry menu bar, select Registry | Import Registry File
    5. Navigate to the folder in which your registry is saved and locate the file
    6. Click the Open button - the registry will be restored
    7. Close the registry editor
    Best wishes
    Michael

  • Making the Business Area field as editable

    Hi
    We have business area field as compulsory field for document splitting. The same is picking up on the Business Area assignment in SD. However, the field for the same is seen as greyed out field in Sales Order at line item level. we would like to make the same field as editable. How can the same be done?
    Regards
    Rahul Sharma

    Hi
    The fields in a sales order can be made optional / mandatory by following this menu path - IMG - S&D-> Basic > Functions-> Log of incomplete Procedures => select the fields > from the tables and the system will check for them (OVA2/VUA2)
    To make a filed entry enabled or grey (non-entry allowed):
    User exits in the program MV45AFZZ-USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields. To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP.
    If a field has no field name, it cannot be allocated to a group. The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains ‘LOO’ for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit. This FORM routine is called up by the module FELDAUSWAHL.
    Actually suppressing fielding sales orders userwise is quite easy. We are doing it in our company. For this we use userexit FORM USEREXIT_FIELD_MODIFICATION in MV45AFZZ.
    Below is the sample code
    IF SCREEN-NAME = ‘VBKD-ABSSC’.
    AUTHORITY-CHECK OBJECT ‘ZMV45AFZZ’ ID ‘SCRFNAME’ FIELD SCREEN-NAME.
    IF sy-subrc = 0.
    SCREEN-INPUT = 1.
    else.
    SCREEN-INPUT = 0.
    ENDIF.
    endif.
    You place the authority check object in authorization profile in the role of the users, who should have access to the field (in this case it is VBKD-ABSSC), and there assign the corresponding fields that are to be accessed via this userexit.

  • How to make the Business Area field from Change Mod to Display Mode in AS02

    Hi Gurus,
    I created a Customized T-code   YAS02   for making the Business Area in Display mode with the help of SHD0.
    But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
    Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
    Thanks in advance...
    regs / Devi Aparna

    Hi Devi,
    check the following customization
    asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
    Regards,
    Ranjith

  • What is Month End Procedure using in Business Area?

    Hi All,
    What is Month End Procedure using In Business Area?
    Thank you
    Ramakanth

    Hi,
    As my experience business area month end to check the profitability each b. areawise and all the month end adjustment entries should be enter business area wise. We can also check the clearning for one business area to anyother b.area.
    Regards,
    Pankaj

  • Query to identify to which resposibilities the business areas asre shared

    Hey,
    I have a requiremnt to identify to which responsibilities the Business Area's in the EUL are shared with.
    Can anyone help me if with query to get this info?
    Thanks,
    SK

    SK,
    This is the query I have been using. As you can see, my eul schema owner is eul_us:
    select upper(ba.ba_name) business_area ,
    resp.responsibility_name ,
    resp.responsibility_id ,
    nvl(crtd_by.user_name,'Seeded Business Area') created_by,
    --usrs.eu_username                                   ,
    regexp_substr(usrs.eu_username,'[[:digit:]]+',1,1) user_id1,
    regexp_substr(usrs.eu_username,'[[:digit:]]+',1,2) user_id2,
    crtd_by.user_name
    from eul_us.eul5_eul_users usrs ,
    eul_us.eul5_access_privs privs ,
    eul_us.eul5_bas ba ,
    applsys.fnd_responsibility_tl resp,
    applsys.fnd_user crtd_by
    where privs.ap_type ='GBA'
    and privs.ap_eu_id =usrs.eu_id
    and privs.gba_ba_id =ba.ba_id
    and resp.responsibility_id (+)=regexp_substr(usrs.eu_username,'[[:digit:]]+',1,1)
    and crtd_by.user_id(+) =regexp_substr(ba.ba_created_by,'[[:digit:]]+',1,1)
    and resp.language= 'US'
    order by 1;
    I hope this helps.
    Patrick

  • Removing the business area from the WBS element

    Hi Experts,
    I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
    Now I want to remove the business area from WBS element.
    Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
    Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
    But still Business area field is grayed out for that WBS element.
    Could you please let me know how to remove the business area in this case ???
    Regards,
    Pradip

    Hi,
    Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
    Create new wbse with correct BA & then create pr & po.
    Regards,
    Sandeep

  • How to Install the Cubes(SD & MM) by using the Business Content

    Hi All,
    Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
    And also require any Material & Navigation steps for to do this...
    Reply back me to [email protected]
    Regards,
    Kiran

    I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
    stage, as nobody has answered, I would recommend that you call Intune support.
    You will find your local Intune support number here
    http://technet.microsoft.com/en-US/jj839713.aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Using the rendered area as an output for a switcher.

    Hello
    I am working for a webcasting company that wants to use some nice graphics made in AE. Our question is if it is possible to use the render area as an output instead of having to render the comp into a video file and playing that back.
    We are using CS 6
    Much appricated

    Sorry, but you're trying to make AE do something it wasn't designed to do.  If you want to integrate motion graphics from AE, you will have to render the animation.  If it has transparency, you'll have to render in a codec that supports alpha channels.
    You'll also need a playback device to play (and possibly loop) your animations.  Since these are live webcasts, I expect you may also want to include lower-thirds, titles and other things.  If this is so, you'll need to get a character generator; most CG's these days have the capability of incorporating animations like those made in AE.

  • Can i view customer report as per the business area wise , region-wise how?

    can i view customer report as per the business area wise , region-wise how?

    Hi,
    You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
    Regards,
    Pankaj

  • Problem in changing the Business Area?

    Hi,
    I have a discoverer report where the eul folders are in one business are. Now I need to change the business area. By manage folder option I can do that.
    Now my query is as the business are is changed for the folder what should I do for the workbook. Do I need to recreate it because the business area definitions are changed.
    Could anyone please help....
    Thanks

    Hi,
    You don't need to change the workbook at all. However, make sure the business area security is correct so that the workbook owner can still access the folder. The workbook references the folder and so the folder will be shown in the new business area when you inspect the workbook items.
    Rod West

  • How to fetch the Business area field value from MIRo into report

    Hi,
    I want to create a report for MIRO with payment details.
    How to fetch the business area field value in to report.
    What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
    After that, how to find the accounting document for payment and check details.
    What are the table names and field names. What we can get from PAYR table.
    With regards
    Lakki

    Dear,
    For Bussiness area
    RKPF-GSBER

  • Error code "A valid key code to use the Business View Manager is not found"

    Hello.
    I am trying to resolve this message in the Business View Manager. The message of " A valid key code to use the Business View Manager is not found" appears when accessing a folder in the Repositiry Explorer. I have admin rights for View, Edit and Set Security.
    What am I doing wrong?

    Try running this query in the CMS Query Builder tool:
    Select * from CI_SystemObjects where si_id = 4
    When the query returns, look for the attribute "SI_CAN_USE_METADATA" and see if its set to false. Or see if something else in there is set to false that looks more suitable.  Your keycode might have the BusinessView manager locked out.  The error sounds more like a keycode restriction than a permissions issue with security.

  • Select a small area and then use the selected area to paint other areas of the image

    Hello
    My problem is a little hard to explain but I try.
    What I want is to select a small area and then use the selected area to paint other areas of the image. Do not know how to do it and if it's stamp tools or pen tools to be used?

    Howdy.
    Sounds like you're looking for the Clone Stamp Tool. Set to Aligned, the sampling point resets when you release the mouse after painting. Untic Aligned and the sampling point stays in the original spot for the next stroke. It's a good idea to clone onto a separate layer with Sample All Layers selected. Then you don't lose original pixels. Allows you a do over later.
    FWIW.
    Peace,
    Lee

Maybe you are looking for