Using the Capture function with a Capture Card

I was wondering why I can't get premiere to recognize my capture card when I try to use the capture function.

Ah, then you are out of luck. Premiere only captures via firewire.
If your camera has usb then copy content of memory or card to hard disk then import into Premiere.

Similar Messages

Need help using the "skatter" function with brushes.

I'm using Photoshop 7 right now. I want to use the scatter function with one of the standard brushes to make a star trail, but the problem is that the stars are too thick, there's too many of them. How do I tell it to draw less instances of the brush when I'm in scatter mode? So that it's only dropping 5 at a time or so?

I have a control bar for "Master Diameter" but I can't find anything that says "spacing."

How do i lock all fields without using the signature function with adobe lifecycle designer 9

How do i lock all fields without using the signature function with adobe lifecycle designer 9 ...
I want it to have the same affect as when a signature is used but not use that function. I want a button that says lock all fields. And then you can click it again to unlock all fields...
Thanks

Here you go!
LOCK the form once its SAVEd?

Using the IF function with a range of numbers

I am working with the IF function and trying to get it to work "if" the number I'm examining is within a range of numbers.
Example:
If a wigit costs between $1000 and $1999, then a discount of $100 is given
If a wigit costs between $2000 and $2999, then a discount of $150 is given
If a wigit costs between $3000 and $3999, then a discount of $225 is given
And so on.
If cell A1 always holds the current cost of the wigit being sold.
cell B1,B2,B3 holds the value of the discount values respectively.
In cell C1 I would like to return what the current discount value is to be given for the wigit price in cell A1?
How do I do this using the IF function or is there another way?
Thanks,
Ryan

HI Ryan,
In this post you have, except for the issue noted by Badunit, the basis for the discount table described by Wayne:
I'm trying to devise a way of knowing what Cash Card a customer will receive depending on the amount of the purchase, based on the following table:
$0         to $999 purchase         =      $50 Cash Card
$1,000 to $1,999 purchase     =     $100 Cash Card
$2,000 to $2,999 purchase      =     $200 Cash Card
$3,000 to $3,999 purchase      =      $300 Cash Card
$4,000 to $4,999 purchase      =      $400 Cash Card
$5,000 to $5,999 purchase      =     $550 Cash Card
$6,000 to $6,999 purchase     =      $700 Cash Card
$7,000 to $7,999 purchase      =     $850 Cash Card
$8,000 to $8,999 purchase     =      $1,000 Cash Card
$9,000 to $9,999 purchase     =     $1,200 Cash Card
$10,000 to   UP   purchase     =     $1,500 Cash Card
To take care of the issue noted by Badunit, you need to revise the top line to state the minimum purchase necessary to earn a cash card, then add a line above that to handle purchases under that amount. I've arbitrarily chosen a $500 minimum, which results in these two lines:
$0             to $499 purchase        =      $0 Cash Card
$500         to $999 purchase         =      $50 Cash Card
To write this as Wayne's table, you need to remove all of the text (including the $ currency markers), the top end of each range, and the = sign. What you're left with is two columns of numbers: The bottom number of each range of values, and the number telling the dollar amount of the cash card for that range. Here's your table, edited to make it work with LOOKUP:
Here is a second table (Main), containing only the labels and the two cells involved in the calculation of the cash card amount. The Purchase amount is the amount used in your example. The Cash Card amount is produced by the LOOKUP formula below the image.
Purchase price is in cell B1 of the table "Main". The LOOKUP formula is in B2:
B2: =LOOKUP(B1,CC Amt :: A,CC Amt :: B)
LOOKUP acts essentially as you request in your post containing the iPad image with the time shown as 1:46. But it takes a much simpler approach.
Here's the syntax:
LOOKUP(search-for,search-where,return-from)
LOOKUP gets the search-for value (2535) from cell B1.
It looks in column A of the table "CC Amt" for the largest value less than or equal to the search-for value, and finds 2000.
It returns the value from the same line of column B (200).
Below are two more examples. Main-2 and Main-3 are copies of the Main table. Both contain exactly the same formula as Main, but have had a different Purchase price amount entered. LOOKUP uses the same CC Amt table as is used above, and returns the appropriate Cash Card value for each of the two new amounts:
You may, as implied in your 1:46 post, use a pair of cells to calculate the Cash Card amount for each widget in the purchase, then total the Cash Card amounts, or you may use a single pair of cells, one containing the total purchase amount, the other containing the Cash Card amount due for that total. That choice is yours. The formula is the same for either case.
Regards,
Barry

Using the Treo 750 with no SIM CARD

Please advise on how I can use the Treo 750 for everything except what I would need a sim card for. I am currently upgrading my smartphone, but would like to have my wife use the PDA functions and apps on the Treo without having to insert a sim card until she is comfortable with using the smartphone for everything else.
The features I would expect NOT to have is phone service, wireless data service - wireless exchange email and wireless internet access. Associated services that would be great to retain - Outlook Exchange Server synch/update via USB when tied to a PC that has internet connection.
Sort of like turning an iphone into an ipod touch.
When I boot the phone without a sim card, it basically says I cannot use it without a sim card. Would I need a "dummy" sim to make the thing more than a paperweight?
Please advise.
Post relates to: Treo 750 (AT&T)
Message Edited by Lordchu001 on 01-14-2010 11:33 AM

Hello!
Quickly hit the start menu button twice and that should go back to the today screen and use like a PDA. Due note that a restart and/or using cellular stuff could trigger the SIM card requirement again.

How do I find out what year my MacBook Pro is? I want to know if I can use the mirroring function with my Apple TV if I download Mountain Lion.

I'm trying to find out if I can use the mirror function to look at large construction drawings using my Apple TV. It says that my MacBook Pro has to be early 2011 or newer and I can't remember what it is.

Mactracker - Get Info on any Mac

Why can't i use the ftp functions with a built file

I have created a report program that connects to an MS Access database and generates a series of reports from it. i also wanted to give the user the ability to download the database. we haev the database stored on a server at a different building. i have used the labview FTP function in the internet tool kit. the program works fine in the development mode. however if i build an application the ftp call fails to work. i have added traps so that if i get an error i will know it. unfortunatly the program flows through with no errors but the database is not copied.
i have also written an ftp function which works in the development mode and the application mode with no installer, but it does not work in the apli
cation mode with an installer.
Attachments:
test_ftp.vi ‏28 KB
shawns_ftp_get_files.vi ‏71 KB

Well once again I find myself on a machine that will not let be take a look.
I am glad to here that you have your app running.
I am troubled by by the solution. It makes me nervous when functions behave differently in the two environments. Have you run this past NI support?
I'll email myself this link as a reminder for monday.
Thank you for the update.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I use the iPhone 4S with no SIM card?

How can I use the 4s with
no SIM card
Just for photo and internet

Using an iPhone without a wireless service plan - Support - Apple

How to use the sharing function with other pc on the Finder sidebar?

I discver my housemates' pc's names under "sharing" on the Finder sidebar. We all use the same wifi network at home. Neither they nor I have enabled anything so I'm just wondering what is that for and where am I able to control sharing options?
Also I can even access their iTunes libraries. How do these all work? Am I able to set any security options at all?

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

How to use video capture function with Ti4200-VTD8X card?

I have installed nVIDIA Capture Driver provided by MSI (come with VGA card), but don't know how to use this function, do I need to run a third party program or simething else? I couldn't find any document or information in MSI site talking about this function: "Capture the image through the video input port on the card". Please help, Thanks in advance.

Try Ulead Video Studio or check your card's bundled software.Intervideo WinProducer anywhere?
Check your card's manual for proper connections :D

Using the WRT54G3G-ST with cellular PCMCIA cards other than Sprint?

I am looking at using a Cingular PCMCIA "aircard" with my laptop, but would also like to take advantage of it at home for a desktops with wi-fi adapter when not in use with my laptop. The WRT54G3G-ST seems to only be sold from Sprint (in the US at least), but I am wondering whether folks here have experience using it with any other vendor cellular broadband cards? It would seem that this SHOULD work, but I wanted to see whether there are any known gatchas.

Have you changed Sprint login info to Cingular info?
In notebook, load Sierra Watcher software, verify card connects thru watcher, then ask watcher for particulars of connection to Cingular.
Change all the Sprint connection info to Cingular.
One other problem, Sprint frequencies may differ. Sierra web has pdf with command set of Sierra cards, so you can ask card for frequency band it is using.
Many posts of connecting to Cingular in Linux should apply to G3G connection to Cingular. Many lists of conection protocols are in those posts.
Please reply if it works near fast as same card does in Windiz!

Using the "fit" function with "mFct" ?

having a problem with declaring a function and using it in a nonlinear least squares fit:
function Fit5(a,x,y)
rslt5 = a[1]*(2.0*besselj(sqrt(.....;
return rslt5;
end function;
[a, res1, q1, qVar1] = fit(g, Top_data, fit5, guess,,,iterMax,w,rho );
getting the following error message:
is not a valid signature for the function"fit"

having a problem with declaring a function and using it in a nonlinear least squares fit:
function Fit5(a,x,y)
rslt5 = a[1]*(2.0*besselj(sqrt(.....;
return rslt5;
end function;
[a, res1, q1, qVar1] = fit(g, Top_data, fit5, guess,,,iterMax,w,rho );
getting the following error message:
is not a valid signature for the function"fit"

Why my iphone5 can not use the weather function with the mobile internet?

I just bought an iphone5, but the weather software doesn't work if not using wifi, the support people told me that Apple desined this only for wifi, but I don't think so, pls help to find a solution

As the attached article shows, AirPlay Mirroring requires an iMac to be from mid-2011 or newer.
You should be able to use AirPlay to send music (but not video or pictures) from your iMac to speakers.
http://support.apple.com/kb/SP654

Can't use voice/video functionality with external domain connected users through federation

Hello All,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way to resolve the issue.
Thanks, MK

Thanks for your reply.<o:p></o:p>
Audio/Video works fine within corporate when dial any lync contact. We only have issue while trying to use the same functionality with any other
external lync contact configured over federation option.<o:p></o:p>
We already checked the security rules and all required ports are open, as confirmed by local resolver group.<o:p></o:p>
We have checked with external parties and according to them their systems are hosted by Microsoft as part of office 365 suite and they already have
federation option for 17 different customers which works fine. Which means issue must be your local end.<o:p></o:p>
Is there any tool available to identify the issue from client end?<o:p></o:p>
Also I have a question here....In my corporate environment...client is sitting in India and lync servers are hosted in UK and users connect to it
over MPLS route. In Client lync configuration we have internal/external servers configured .....so when i tried to make a voice call with external lync users then I see from netstat -a command that traffic hitting to multiple public IP addresses
directly from my machine..<o:p></o:p>
Does it mean that client required internet connectivity with specific open media ports to connect with external parties for video/voice? or in ideal
case all request should handle by corporate internal server which should took UK internet path to connect with external lync contact?
Thanks, MK

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?

Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

Using the Capture function with a Capture Card

Similar Messages

Maybe you are looking for