Using the Clip Plane

Hello, I seek the wisdom of the Labview Gurus. I have a VI that I can succesfully create objects and display my data. I can then manipulate the position and do a host of other things that I need done. Unfortunately, I cannot seem to figure out the Clip Plane. I have tried using the Create Clip plane VI and then using the property node to add the Clip Plane, but this does not work. I also created an object called "Clip Plane", added the Clip Plane to that object, and then added Object "Clip Plane" to the parent object. This did not work either. None of the examples seem to have Clip Plane usage in them. Any help would be greatly appriciated.
Thanks,
Austin
PS - The solar system VI was an awesome example in 3d modeling!

I found out my own problem. To turn on the clip plane, there is a control node under objects called "Set Clip Plane". Under this is an option to turn on clip planes for the objects.

Similar Messages

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it?

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it? I am on Telus mobility with my iphone 4s.

See the answer on the same question you asked a few minutes ago.

Using the Clip function of an AP-Element

This is a follow up question to my previous post asking about
opening external links within my site.
After taking some good advice on embedding the image in an
HTML doc on my site and then calling this page from the navigation
bar.......I'm now on the trail of embedding the image in an
AP-Element so I can then do my RHS or LHS justification using the
clip function. In principle I've had it working once on my exisitng
home page, but as soon as I try creating a new Doc and embedding
the AP-element the clipping fails to work. If I clip the LH corner
of the image it diplays correctly in the designer window, but as
soon as I go to the browser preview it reverts back to an unclipped
version of the image.
This is what I'm doing:-
1) I create a blank new document
2) I then add an AP Element by Insert|Layout Object|AP Div
3) I then resize this to a reasonable size on the page and
then insert an image
4) I then click on the AP-element border and go to the Clip
property and set up to clip the LH corner of the image
When I then look at the designer window, it correctly shows
the clipped LH corner as expected. But as soon as I preview it in
the browser it reverts back to the full size image.
Any guidance would be most greatfully received.
Thanks,
Neil

Tell us again why you are clipping the image, please?
Also, AP elements cannot interact with any other elements on
the page
because the fact that they are absolutely positioned removes
them from the
normal flow. So, if you are seeing movement that you
interpret in this way,
you are not interpreting it correctly - most likely you have
other issues on
the page. Finally, editable regions are NOT layout regions -
they are
content regions. If you are seeing 'editable region' issues,
then look to
your page's code and the HTML infrastructure there, not at
your template
region markup.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"CS4Rookie" <[email protected]> wrote in
message
news:gqnrea$1d$[email protected]..
> Ok, I have part of the site running now so you can see
what stage I'm at.
>
> I think the AP element clipping works ok for what I'm
doing, but it does
> pose
> problems with a large clipped image as I need to select
a different
> clipping
> area for each side of the image. When I do this I then
need to move the AP
> elemnt around in the page and this seems to create
editable region issues
> due
> to it being a wide image.
> Again, this is probably due to my inexperience, so I
guess I'll sort it
> out if
> I put enough time in.
>
> Thanks for your comments and support so far.
>
> Neil
>

Using the deployment plan to extend the security roles

Hi,
We have an existing application that has a set of security roles defined. This app has been deployed to Weblogic.
We would like provide additional security roles through this application. Currently, we have been doing this by manually editing the web.xml and the weblogic.xml files and redeploying the app. Is there any way to achieve this using the deployment plan feature ? If yes, how do we do it?
Regds,
Mridhula

you can use the following deployment Plan xml file:
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://www.bea.com/ns/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/deployment-plan http://www.bea.com/ns/weblogic/deployment-plan/1.0/deployment-plan.xsd">
<application-name>deploy_plan</application-name>
<variable-definition>
<variable>
*<name>RoleName</name>*
*<value>plan</value>*
</variable>
<variable>
*<name>PrincipalName</name>*
*<value>test</value>*
</variable>
</variable-definition>
<module-override>
<module-name>appA.war</module-name>
<module-type>war</module-type>
<module-descriptor external="false">
<root-element>weblogic-web-app</root-element>
<uri>WEB-INF/weblogic.xml</uri>
     <variable-assignment>
*<name>PrincipalName</name>*
<xpath>/weblogic-web-app/security-role-assignment/[*role-name="plan"*]/principal-name</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>web-app</root-element>
*<uri>WEB-INF/web.xml</uri>*
     <variable-assignment>
*<name>RoleName</name>*
*<xpath>/web-app/security-constraint/auth-constraint/role-name</xpath>*
</variable-assignment>
     <variable-assignment>
*<name>RoleName</name>*
*<xpath>/web-app/security-role/role-name</xpath>*
</variable-assignment>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>E:\wls_docs\deploy_plan\plan</config-root>
</deployment-plan>
thanks,
Sandeep

Anyone ever use the global plan for an 5c

Going to France next week with a iPhone 5c. Has anyone used the global plan? How's it work, dialing numbers both in France and US?

Roger1968,
Traveling is always an exciting time! And being able to use your phone while traveling is definitely important.
Our Global plan are awesome! You can get 100 minutes, 100 text to send, and 100MB for only $40. If you only want to use data you can add the $25 and receive 100Mb to use.
While in France and you want to call the USA, just dial Plus Sign then 1 then ten digit U.S. number. To call a number in France just dial Plus Sign then Country Code then Local Number with Area Code (if applicable). For complete details you can visit http://www.verizonwireless.com/b2c/tripplanner/tripplannercontroller. Once there enter the country you will be visiting and your phone model. It will provide all the info you need. Keep us posted of you need further assistance.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

If i have an ipad 3 with wifi feature only, can I add or use the data plan in another country?, if i have an ipad 3 with wifi feature only, can I add or use the data plan in another country?

I have an ipad 3 with wifi feature only, can I use the data plan 3G in another country??

No. You have no place for a sim card in the WiFi only iPad. You MAY be able to purchase a personal MIFI hotspot that will work with a data plan in another country. I have one here in the U.S. that I bought through Verizon, but I assume it will only work on the Verizon network here with my Verizon Data Plan. So you would need a data plan in the country in which you want to use the iPad if this option is available for you.

Is the ipod shuffle or nano good for exercise if you just use the clip on the unit, and connect to your shorts? if so, does it feel like it's too loose, might fall off?

is the ipod shuffle or nano good for exercise if you just use the clip on the unit, and connect to your shorts? if so, does it feel like it's too loose, might fall off?

I often use my shuffle while exercising, cleaning, and just generally going about my day. Never once has it come unclipped exept for when I got the earbud cord caught on something and got said earbuds yanked out of my ears. I have permanently solved that problem by simply running the cord under my shirt. Works like a charm! I can't answer you about the nano, though I'd say it has a higher likelihood of coming off as it is a bit heavier.

If you use imessage while on WiFi does it still use your data plan or does it only use the data plan if you're on 3G?

I just got the new iPhone4s (my first time off of a flip phone!) with the imessaging but I'm not sure if that is going to use up my data plan if I use it instead of texts. If I'm at home on my wifi will that still take away from my data plan if I use imessage? I know that FaceTime works off of wifi as opposed to the data plan but wasn't sure if it was the same for imessage. I'm on the Verizon data plan if that matters.
Thanks!

This weekend, the AT&T tower near our home failed. We had no AT&T cell service whatsoever. During this time, our home WiFi was always running at 100%. No iMessage would go through, nor could any iMessage be received. Both my and my wife's iPhone 4S were connected to the home WiFi and were used with it. Two things did not work: cell service and iMessage.
I think that iMessage seems to rely on the phone data plan, or at least the cell service must be in range to use it.

Using the Demand Planning functionality in TEM

Good afternoon
I have been trying to use (in our test client) the Demand Planning functionality of TEM, I am wanting to create demand based on last year's bookings however I get no results. I have courses, which are firmly booked with attendees on them in last year. Is there a minimum number of courses and/or attendees required before a demand can be created? What am I missing?
Many thanks
Dawn

Hi Dawn,
Try this:
Run the demand planning report using either S_AHR_61016220 or PSV2. Choose the event type which you want to create demand for, or if you have used PSV2 that is already defaulted. If the location is mandatory then put that in and run the report for the year 2010 (with all or the specified quarters checked). If you are running this for the first time, then you should get a screen which says No demand exists. Click on the name of the event type such that it is highlighted (where the cursor is on the name of the event type). Click on the Plan button (F5) and then click on the Plan button button again (F5). This should give you the various options of prebookings or bookings from the previous yea. Select the one you want, and it should determine the demand which you will transfer and save.
Regards,
Priya.

Can Illustrator snap clipping groups to grid using the clipping path?

I want to be able to snap a clipping group to grid so that the clipping path snaps to the grid, not the masked paths. Is this possible?

Thanks for the replies, however neither is a solution to the problem. I want to make a seamless tessellation pattern using a clipping group as the unit of repetition. No matter what I try, Illustrator does not allow me to "over-ride" the anchor points of the clipping contents in order to snap the clipping path to grid. Of course it can be done manually, but if the clipping mask is an equilateral triangle, for example, and the pattern reflects on all sides of the triangle as it repeats, a manual construction is a hassle. And besides, the whole idea is to use snap-to-grid to guarantee a seamless tessellation.
The solution to the problem would be if Illustrator could treat a clipping path as a crop rather than a mask when snapping to grid.

P.S.Elements. How do i use the clipping mask for painting? I can't quite apply it for anything.

I'm wondering if the clipping mask can be used for painting on layers. I can't get it to do anything. I'm rendering race car paint schemes. Elements doesn't have paths. I have Gimp but I want to stick with photoshop. Something about Gimp I just didn't feel it

Could you give an example of what you are trying to do ?
The concept of clipping mask is not intuitive at all. Besides 'normal' layer masks associated with their layer, the clipping mask is a 'normal' layer having transparency. It has a what was called a 'linked layer' in older version. The 'clipping mask' layer determines transparency of the linked layer (which is shown offset to the right in the layers panel) to show that the effect of the clipping mask is limited to the above linked layer(s). Instead of having one layer with a mask, you have a mask targetting the 'above' layer.
The difference is that the normal mask uses greyscale values to represent transparency while the clipping mask has real transparency.
So, the purpose being masking, I don't see how you could use it to paint ?

I used the protection plan on my iMac, but it is not working for my Time Capsule...

I recently bought the Apple Care Protection Plan and I got my iMac registered for it. However, I cannot get my Time Capsule, purchased months before the Protection Plan, registered. I did type the serial numbers of both the Plan and the device correctly, but the site cannot register the Time Capsule, I keep getting a system error. Is there a way that I can get the Plan on my Time Capsule too? I could buy another Plan, but I don't think I should spend another $200.00 if it's not necessary. Can anyone explain why my Time Capsule cannot be registered with the plan?

DestroyerDrak wrote:
I recently bought the Apple Care Protection Plan and I got my iMac registered for it. However, I cannot get my Time Capsule, purchased months before the Protection Plan, registered.
That's correct; it's covered, but you can't register it separately for some reason. (I went through this with Apple a couple of years ago myself.)
Just keep your receipts, preferably with the serial number, in case you ever have a problem.

Using the clip volume envelope to amplify rather than attenuate

Hi everyone,
I was trying to edit the volume envelope of a clip in Multitrack View, and I realised that the volume envelope really only allows you to *attenuate* the volume of a clip throughout its duration, not *amplify* it. In other words, you can only add points on the envelope that are *beneath* the +0dB line, thus decreasing the volume by so-many dB.
Is there a way to also vary to volume of a clip in the other direction, that is - to amplify it, in the Multitrack View?
Many thanks for any suggestions!

Presumably because that is the limit set by Adobe for that operation. If you need more than that then you probably need to permanently increase the level of the file in Edit View.
There seems to be, however, a workaround. If, having rescaled the clip envelope to maximum, you Right click and open Clip Properties you will see that Audition has set the Clip Volume to the max of +15dB. If you reset the fader level to 0 you can then go and rescale the Envelopes a second time. This may allow you to get the gain you require. But, as mentioned above, if your levels are that low in the first place I would raise the level of the file permanently in Edit View.

Error message while using the hyperion planning copy utility

When i try to copy an application from production server to development server using copy utility ,having relation databases in SQL server i got the following error message.
" D:\Hyperion\Planning\bin>copyApp /S:PLAN /T:HYP_PLAN /P:copyapp.properties /L:pl
an.log /A /C /O /E /U
Creating rebind thread to RMI
Exception in thread "main" java.lang.RuntimeException: PLAN_JDBC_DATABASE_TYPE i
s undefined or it's value is null
at com.hyperion.planning.copyapp.CopyAppHelper.getConnectionInfo(Unknown
Source)
at com.hyperion.planning.copyapp.CopyAppHelper.getConnectionInfoFromProp
ertyFile(Unknown Source)
at com.hyperion.planning.copyapp.CopyApp.main(Unknown Source)"
my coppyapp.properties file is
"Plan_JDBC_CATALOG=HypSys9Plan
Plan_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
Plan_JDBC_URL=jdbc:hyperion:sqlserver://naspdsvdb03:1433
Plan_JDBC_USERNAME=HypSys9Plan
Plan_JDBC_PASSWORD=isoIEn28Jkh
Plan_JDBC_DATABASE_TYPE=SQL
Plan_OLAP_SERVER=naspdsvap28
Plan_OLAP_USERNAME=admin
Plan_OLAP_PASSWORD=password
Plan_OLAP_APPNAME=Plan
Plan_JDBC_CATALOG=hyp_plan
Plan_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
Plan_JDBC_URL=jdbc:hyperion:sqlserver://nasdvsvdb02:1433
Plan_JDBC_USERNAME=HYP_PLAN
Plan_JDBC_PASSWORD=hyp_plan
Plan_JDBC_DATABASE_TYPE=SQL
Plan_OLAP_SERVER=naspdsvap20
Plan_OLAP_USERNAME=hyeasprod
Plan_OLAP_PASSWORD=hyperion
Plan_OLAP_APPNAME=Plan "
I could not interpret above mentioned error.anybody have any suggestions.
thanks
Pavan

Hi,
The utility is case sensitive, in your parameters you have put /S:PLAN but in your copyapp.properties you have lowercase plan_
so the utility is looking for PLAN_JDBC_DATABASE_TYPE and won't find it because you have plan_JDBC_DATABASE_TYPE
either change the parameter or the properties file to match
Cheers
John
http://john-goodwin.blogspot.com/

Do i have to buy a phone from verizon to use the edge plan? can i buy a used verizon phone and still recive the $25 per month discount with 10 gigs of data?

id prefer to buy a used phone for a lower price, but only if i can still get the edge discount

Don't do it... That verizon Edge will literally bring you over the edge should you try to leave, be sure to read the complete contract which they don't advertise correctly...
Verizon Wireless is basically a criminal who misleads their customers. My contract was almost up. I sign up for the Edge program, and the way it was explained to me, was "oh this way you can upgrade when you want (really once a year) and you aren't in a contract". Well that was a lie. I decide to go elsewhere so I call and ask what I need to do. They say "well, you are in a contract", (ok that wasn't told to me but fine) I ask what my termination fee is, they say "To get out of your edge program, you have to pay the $500 remaining fee for your phone ( Galaxy S5 which I was paying monthly, $25) and a termination fee for your service of $150."
HOLD up, so basically you are telling me that you guys came up with a way to charge two **** termination fees????? If I decided to take my phone with me, I could almost understand that, but If I give the phone back, why would I be paying for something that is no longer in my possession??? They say" That is how the Edge program works" WHAT COMPANY RUNS GAME LIKE THAT ESPECIALLY WHEN THEY ARE GOING TO TAKE THAT PHONE AND RESELL IT??? WHAT COMPANY LIES AT THE START OF A PROGRAM AND NEVER TELL YOU WHAT THE REAL DEAL IS???
I will be making it my business to go to every possible website to not only complain but warn potential customers to stay away from this company who will mislead you and then rob you when you decide to walk away. I worked for a telecommunication company for 10 years and never heard of anything like this in my life...***?!?!?!?!?!?

Using the Clip Plane

Similar Messages

Maybe you are looking for