Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks@

Hi Charles,
Are you still facing this issue. Is this issue reproducible with every file you want to convert.
Regards,
Ajlan Huda.

Similar Messages

Does using the home button in 4s would result to being damage in the long run? I really don't like the assistive.

I do prefer using the home button. Will it somehow be 'damaged' in the long run? I just need assurance. *TIA.

Any mechanical component is subject to failure. If it does fail, if your device is in hardware warranty, it would likely be replaced. If you are still within the first year, purchase AppleCare to extend the warranty for an additional year.

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

In Adobe Digital Editions a ding sounds everytime I use the arrow buttons to scroll...how do I stop this?

In Adobe Digital Editions a ding sounds everytime I use the arrow buttons to scroll...how do I stop this?

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle.
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
See also http://kb.mozillazine.org/Accessibility_features_of_Firefox

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut down the computer?

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut the computer down.
How do you delete programs?
thanks

If Flash Player is indeed the problem I would suggest using the Adobe Uninstaller.
Have you tried using a different browser such as Chrome, Firefox or Safari to see if they have a problem with Flash?

Click the Convert button in the Adobe PDF toolbar?

Windows 7 Pro - 64
Just installed Acrobat as tool for converting HTML pages to PDF.
Adobe says to open HTML page in Chrome then "Click the Convert button in the Adobe PDF toolbar" to make this happen.
How do you get the the toolbar into Chrome please?

Hi ,
Could you please explain what toolbar are you referring to and why do you need that toolbar ?
Do you just want to convert the PDF or perform some more tasks as well ?
You can refer the following link on how to convert a HTML file to PDF .
It also has an attached video to get more information about conversion of HTML files to PDF . Please have a look and see if that helps you .
Acrobat Help | Converting web pages to PDF
Regards
Sukrit Dhingra

How to suppress Save As dialog when using the Close button on an editable pdf

Environment: Windows 7, SDK 9, Adobe Acrobat Pro X, Visual Studio 2010 Professional
Summary: when a document is opened for editing using automation, edited, then closed using the "Close" button, the confirmation dialog appears, "yes" is selected and then the "Save As" dialog appears. It should save without the "Save As" dialog in the same way it does were the document opened from Adobe Acrobat directly. My question is, is there any flag to set which governs whether the "Save As" dialog appears as part of the close document process. It is behaving as if the document is read-only upon close. (it isn't)
This is how the document is opened from C++:
if(SUCCEEDED(hr = ::CoCreateInstance(__uuidof(Adobe9::Acrobat::CAcroAVDoc), 0, CLSCTX_ALL, IID_IUnknown, (void**)&pUnk))){
hr = OleRun(pUnk);
if (SUCCEEDED(hr)){
if (SUCCEEDED(hr = pUnk->QueryInterface(&pAVDoc))){
hr = pAVDoc->Open((BSTR)CComBSTR(strPath), strDocName, &bRet);
Even when the plugin is removed from the plug_ins\AcrobatSDK directory, the behaviour is the same.
Another reproduction is running the BasicIacVC sample, commenting out all lines from gAcroPdDoc->Close(); in InitInstance() and returning TRUE. If an editable document is opened using the sample, edited then closed using the "X" button, the confirmation dialog is followed by a "Save As" dialog as if it were a read-only document which it is not.
Any suggestions would be appreciated.
Regards,
Evan

Yes, it does. (as long as the pdf has been opened via a COM interface)

When I try to forward a PDF file by using the email button on the toolbar, it won't send.

I cannot always forward a PDF using the email button on the toolbar. For example, I get a report forwarded to me as a link. When I open the link, the document opens as a PDF. I use the email button on the toolbar to forward the document as an attachment. Outlook pops up as a new message with the attachment. I finish writing my email and hit the "send" button and I get an error saying the doucment couldn't be sent. If I close the email and save it as a draft, I can open the draft copy and it will send. Is there someway to fix this so I can eliminate these extra steps? This has happened on a computer with Adobe Reader as well as a computer with Adobe Acrobate 9 Standard.

teresah7680 wrote:
the doucment couldn't be sent.
Is that the exact message that Outlooks gives you?
Anyway, why don't you just forward the original link to the document, instead of the PDF itself?

How do I increase the text size when I click the T button in Adobe Reader

On some documents in Adobe Reader when I wish to enter text using the T button, I am given the option of the font and size of text. However, on other documents, a very small text size is used with no option to change it. How can I change the text size or bring up the option window?

Press Ctrl+E to open the properties bar, where you could set the font size.

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran.

I purchased PS CS6 recently as a student. At TAFE today we were instructed to convert our NEF (nikon) files to dng files using the converter in Bridge. However when I got home I don't seem to have the converter as far as I can see. Can you help me plea

I recently purchased PS CS6 as a student. At TAFE today we were shown how to convert NEF (nikon) files to dng in Bridge. C
an anyone help me find the converter please?

Adobe Camera Raw (ACR) would be the converter to do this from Bridge. In Bridge, select your nef files then Open in Camera Raw. In ACR, 'select all' then Save Images button at bottom of ACR and set save format to Digital Negative. (File extension should show dng.)

After last maverick update macbook pro can't be shut down anymore - only by using the power button

Hello!
I hope that someone can help: after the last Maverick update I can't shut down the computer anymore - or restart. I need to use the power button. Furthermore several apps don't close when they are supposed to be closed - I always have to check with Force Quit. I could live with that, but not being able to shut down or restart the Mac is more than tiresome. Can anybody help?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Bug Report: [VIsio 2010] whenever I try to save a diagram to JPEG and then close Visio using the X button, Visio hangs

Greetings
I use Visio 2010 in windows 7 64bit
and I have this problem:
whenever I try to save a diagram to JPEG (save as>JPEG) and then close Visio using the X button on the upper right corner, then Visio hangs.
The jpeg pic is saved ok, but Visio hangs permanently: I have to close it using task manager.
On the other hand, if after I save into jpeg, I press whatever other button in Visio (from ribbon) then it works ok, and afterwards I can close Visio with the X button
- but, if I try to close Visio with the X button right after saving to JPEG, Visio will surely hang.
Thank you
PS. Visio 2010 is fully updated (File>Help reports:
Visio 2010 Premium (v14.0.6111.5000) SP1 MSO (14.0.6112.5000) 32bit)

Update:
The problem reappeared/wasn't completely solved:
So, I also went to Control Panel>add/remove programs, rightclick on Adobe Acrobat X> change installation and untick the PDFMaker item, in order to uninstall it:
that's because initially, even after I had unticked "PDFMaker for Visio AddIn" in COM Add-Ins,
in File>Options>Add-Ins tab, on the Active Application Add-Ins part (yes, on ACTIVE Add-Ins)
I was still seeing about 5-6 lines, all having items containing PDFMaker for Visio AddIn" [PDFMVisio.vsl].
In other words, the PDFMVisio.vsl file was loaded even if unticked!!
Then, after uninstalling the add-in, the problem was finally fixed at last!
Thank you so much for this additional information! I was having the same problem. I did what you instructed, and the problem has now disappeared!

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks

Similar Messages

Maybe you are looking for