Using the correct charger for hp dv6? 90 or 120w?? which one? help!

Hi guys, currently im using a charger from my hp dv6-6153sa, but i need to cut this story short so you understand.
First of i changed the motherboard in this laptop, the motherboard is from the hp pavilion dv6-6198sp however the battery is from a hp dv6-6b60sa.
So the charger i'm using is from a hp dv6-6153sa which is a 90w charger. 19v 4.74a
So am i right in thinking i would be better of using a 120watt charger?
Any advice would be much appreciated! thanks
This question was solved.
View Solution.

The specifications that I  have seen show a 120 Watt power adapter is required for both. So yes, you should use a 120 Watt power adapter.
HP Pavilion dv6-6b60se specs
http://support.hp.com/us-en/product/HP-Pavilion-dv​6-Entertainment-Notebook-PC-series/5145688/model/5​...
HP Pavilion dv6-6198sp specs
http://support.hp.com/us-en/document/c03015594
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Can I use the car charger for my 3gs on my iphone 4?

    Can I use the car charger for my 3gs that i bough in the att store on my iphone 4?

    With the 3GS Apple dropped support for charging over the firwire pin on the dock connector. Some older chargers will only supply power over the firewire pin, and thus will not work. There are adapters that will fix this, here's one example:
    http://www.griffintechnology.com/products/firewire-to-usb-converter

  • What is the correct wpa for hp photosmart 5514e all in one printer b 111h

    What is the correct WPA for HP Photosmart 5514e All in one Printer B111h

    Hi,
    The correct WPA one is the one only you (or relatives/friends) know. You may forget therefore you have to logon to you wireless router to find out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can i use the ipad charger for iphone 4

    Can I use the 10w charger which came with my ipad 2, to charge my iphone 4?

    simonfromleicester wrote:
    Can I use the 10w charger which came with my ipad 2, to charge my iphone 4?
    Yes you can.
    Stedman

  • HT4060 What If my iPad is not charging while I'm using the compatible charger for it?

    Please help me, I don't know what to do.

    If you are using an Apple charger and not a third-party item, try using a different outlet, try a different charger if you can get one, use a different connecting cable, see that the dock connector port or lightning connector port is clean.  Reboot the iPad by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    If none of that helps, take the iPad and charger to an Apple store genius bar for testing.

  • Is it safe to use the iPad charger for the iPhone too?

    Is it safe to use the iPad mains charger for the iPhone too or should I have to take both mains chargers with me when I travel?

    Yep. Apple even states it is fine for all iPhone models:
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=13 56c8e49b3b440ef5ee613905938b2d95ccc26a2e307fcc3ff9df927f719c0815466a50b36a93c36e d1ccc14a4e47bddd47ff3e3f338fec059a7d1f919e8902c51c125b58437fe7e450e395554a9f4b59 e8cee82e3543d5a1b8dc5b95c1a6e5ef5f51a3be42b1bd16a66f7591cdf281

  • Can I use the iPad charger for my iPhone?

    Can I use the charger for the New iPad for my iPhone 4? I'll be traveling and want to pack light.

    Thank you

  • Can I use the wall charger for my iPad for my nano iPod?

    How do I charge the iPod battery if my computer is not with me.  Can I use ther wall charger that arrived with my iPad?

    Mombert wrote:
    ...I am a 70 year old retiree...
    So am I!  (Actually, I'm 69.)
    The really great thing about senility is that I can hide my own Easter eggs!

  • What is the correct charger for the new iPad Air 2?

    Our new iPad Air 2 came with a 10Watt charger. Went to the apple store to get a spare. The Apple folk insist the 12 watt unit is what it needs  - sold my will two. Just trying to figure out which is correct for a new Model= 'MGKL2LL/A' iPad Air 2.
    Thanks

    Skydiver119 wrote:
    Either will work. Many people say they received a 10W with their iPad, but it will charge just fine with a 12W. Previous models were shipped with 12W chargers, so no one really knows why the 10W was put in with the Air 2.
    I would guess the Air 2 got a 10 Watt Charger, because the battery in the Air 2 is a bit smaller than the battery in the Air.

  • I upgraded to iPhone 4s from 3g, can I use the car charger for the 3g with the 4s?

    I have a new 4s and wish to use my existing car charger with the phone. The cables that came with the 4s look like the cables for the 3g and ipod I have, but appearances can be deceptive. Just wish to know if I have to buy a new charger or will my existing one work?

    It should work just fine.

  • Can i use the same charger for a 4th generation ipod nano with a 5th generation ipod nano

    I am buying a nano 5th generation ipod with no accessories> will my 4th generation charging lead work on it

    Yes.

  • I need a car charger for my iPhone 5. Which one?.

    Hi, i need a iphone 5 car charger. There are so many chargers, which is the best car charger?.
    Some chargers say 5watts and other say 10watts, i don't know the difference.
    I found a Belkin iphone 5 car charger, is it good?.

    yeah but if i buy the 10watts one, it will damage my iphone 5?.
    or is better to buy the 5watts one and that's it?.
    another question is, is better to buy a Lightning cable OEM and this http://www.belkin.com/us/F8J044-Belkin/p/P-F8J044?q=::devicePath:/Device/IPHONE/ IPHONE5
    or this:
    http://www.belkin.com/us/F8J078-Belkin/p/P-F8J078?q=::devicePath:/Device/IPHONE/ IPHONE5
    i just want the best fo my iphone 5.

  • Just purchased an ipad, can I use the same charger as for my ipod touch?

    I just purchased an Ipad2 and wonder if I can use the same charger for it as my Ipod touch uses?

    I doubt it, as my ipod recharger doesn't seem to charge my iPad at all hence the (Not Charging) where the battery would be.
    Hope this helps

  • Can I use the same charger between my Ipad2 and my Iphone 5s

    Is the plugin charger the same for both Ipad2 and Iphone 5s i.e. The actual charging volts/amps etc. I know the cables are different

    Yes, you can use the iPad charger for both the iPad and iPhone.

  • CAN I USE IPHONE 4 CHARGER FOR 4S?

    Can  i use my old iphone4 charger for my new iphone 4s?

    Yes, you can. You can use the same charger for all iPods/iPhones except the 5th gen iPod, iPhone 5, and iPad mini

Maybe you are looking for

  • Free Goods (With Batch Management)

    Hi Gurus, I have defined a fee goods master data for material on which batch is activated. I have defined the it as with a min of 10 qty 1 free good will be delivered as exclusive item Now as the batch management is active and each batch has 1 qty in

  • Initial Settings in SAP PI 7.3 after System Installation

    Hi, We are installing SAP PI 7.3 here. After media installation by BASIS team, what all other things an SAP PI consultant should maintain/configure(initially before start working on scenarios) ? Since I have worked on SAP PI scenarios where the SAP P

  • Connect to a USB AIO on another computer... and use it to scan

    So this isn't a printing related question, but there's an iMac in the office that has an HP 3055 AIO attached to it. I can print to it perfectly fine (as printer sharing is enabled on the iMac and we connect to the same router and stuff) but scanning

  • ABAP Client proxy message not reaching AAE

    Hi Experts, I am facing a strange issue in one of my proxy interfaces. ABAP client Proxy is used to post message to AAE in SAP PI 7.3. The messages are being generated and pushed out of ECC successfully. I can see them in the SXMB_MONI t-code with ch

  • Strange DAQmx Timing Source Timed Loop Error

    I have a digital edge counter fed into a timed loop. Everything works fine until I stop the loop, and stop the DAQ task. Once I restart the loop it fails with "resource is reserved". Attached is my code. Thanks Solved! Go to Solution. Attachments: da