Using the Currency Symbol in the Layout tab of the Display Template

In xMII 11.5 SP3, I'm trying to format a number in a grid template with the USD ($) symbol. In looking through the 'Number format' help screen, I see I'm supposed a symbol that I can't identify in an ASCII table (though I did find it in an EBCDIC table). I can't show you the symbol - if I could I wouldn't have to post this message!
How do I use this symbol?
David Macindoe

Thanks, Jeremy. I had previously tried $000.00 but all I got was 118.27. I just can't get the dollar sign to display which led me to the help screen and the symbol that I can't reproduce.
After your reply, I changed the display template to $#,##0.00 with no change in the result. I'm putting this in the Format column on the Layout tab of a vertical grid display template.
David

Similar Messages

Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types. $(...).slick is not a function (OnPostRender: )

Hi Team,
I implemented news carousel using display template concepts.
Its working.
But some times it shows like some thing went wrong
when clicke on show details
it showing the error like
Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
$(...).slick is not a function (OnPostRender: )
some times showing result and while refreshing the page am getting the error like below
How to fix the issue
Regards,
Dhayanand

Hi Wendy Li,
Finally we fixed.
The prob is that we referring two different version of jquery files in master page and page layout.
We corrected by referring same version of jquery files in both pages
Regards,
Dhayanand

Problems using the 'stationery template' feature in mail

I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
thanks

I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
thanks

Sending email to user using the notification template in OIM 11g

Hi all
I have created a Notification Template using web console in OIM 11g.
Iam able to access the contents from notification template in my java code.
But iam not able to find the correct api's to send email to user using the notification template
(like tcEmailNotificationUtil using this class we can connect to email template created in design console and creating IT resourse we can send email to user using the method sendEmail).
Waiting for your help and pointers
Thanks and Regards
Bipin patil

Thanks GP!.
But i have the same doubt here.
"The Notification Event is defined through a XML file that must be loaded into MDS database." - in which path and in what name it should be.
Because under /metadata/iam-features-notification, i couldnt see any event Xml present. I thought atleast we could see the existing OOB notification template's event xml files.
Please let me know if you are aware.
Thanks,
Amudha

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to use the DISPLAY RECORD Setup Command in an etext file?

Hi All,
How to use the DISPLAY RECORD Setup Command in an etext file?
I want to display a <NEW RECORD> conditionally. The condition will be based on the data coming through from the xml file.
Please help me with an example. The BI User guide also doesnt show any examples.
Your help is appreciated.
Rgds,
Kiran Panditi

Hi,
You can use vb coding in BEx Analyser to calculate your unit price. For this you have to first display the attributes of your object "XYZ". Then you can use VB cosing to calculate the value for the unit price field.
One more thing cna you clarify whether is it display attribute or variable ?
Regards,
Balajee

Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation? or rotate the display of the tv?

Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation with a app or appleTV? or rotate the display of the tv?

The landscape and portrait mode when AirPlaying your iPhone to the Apple TV will depend on the app you are in on the iPhone.
For example, the home screen on your iPhone is in portrait mode even if you rotate the phone, so if you are AirPlay mirroring this, it will show in portrait mode on the TV. If you have photos taken in landscape mode and rotate your phone or watch a video in landscape mode, then the video should appear in landscape mode on the TV.
If things that should be in landscape mode are not in landscape mode, you might have the orientation lock turned on. You can turn it off or on using the steps in this link: http://www.cultofmac.com/142535/how-to-enable-orientation-lock-on-your-ios-devic es-ios-tip/
I hope this helps!

Using the Standard Template Library with 5.0 using 4.2 compatibility mode

Has anyone used the Standard Template Library with the 5.0 release of the complier using the -compat=4 flag ?

It's not your system, unfortunately. It's iTunes 5.0. I have XP, a brand new drive and Nero. I can burn all sorts of CDs, just none from iTunes.
I have gotten several emails from Apple regarding this issue, none of which helped. The last response I got said they were working on my problem. Right now, the best solution that I can come up with, although I'm not sure how to do it, is back up your songs as a data CD, uninstall 5.0 and reinstall version 4.9.
If you go back a few days (or maybe a week) in the discussions, someone posted a link for 4.9. If you can do this and successfully install 4.9 you will have no problem burning CDs. I just haven't had any luck burning my songs as data. I have 4.9 on an older computer and can burn CDs for days. So all I have to do is get my songs to the old PC and I'll be in business.

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

Use the display with the laptop closed

Hey,
I have a MBP with a 24" display and was wondering how I can use the display as my main screen whilst the laptop is closed.

Click here and follow the instructions.
(49293)

I WANT TO USE THE HD TEMPLATES IN DVDSPRO FOR AN SD PROJECT

I want to use the HD templates that comes with DVD STUDIO PRO for one of my SD projects can how can I go by this I know that you could go from SD to HD but from HD to SD it is impossible.

You might be able to locate the source material that is used in those templates, and down convert each element, then rebuild the templates in Motion.

How to find the Display Template associated with a JSP ?

Hi All,
We have a requirement to alter the text on few buttons and headers for a Published Site. I have modified the Seeded JSP and saved as xxseeded.jsp and deployed in $OA_HTML. Now i want to add this custom JSP to the Display Template but i don't know how to find the Display Template Associated with the Seeded JSP. So, i need to know the Programmatic access name for the Display Template which uses this Seeded JSP as Source file. Is there any where i can check?
Thank you

Hi,
Use the below queries
Use the below query to get the Template name for the associated JSP file.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and a.FILE_NAME like 'Jsp file name here'
Same query can be little modified to get the File name from the Template name.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S
WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and I.ACCESS_NAME like ‘template name here’
Thanks
Pradeep
Edited by: Pradeep Kalyan on Feb 9, 2012 9:40 PM

Result Row of Formula is not using the displayed values

Good Day,
I got a query with following layout
                    Child Ship     Parent Ship     Rate
Child          Parent          ST     ST     %
Material A                         F6WH           F6WH     55     22     250,00
          F7D1           F7D1     55     33     166,67
          F8LG           F8LG     55     11     500,00
          Result                  55     66     250,00
The child ship key figure has a setting calculate result as average to display the total shipment of the child. Rate is defined as formula Child Ship %A Parent Ship.
In the result row as Rate I require 83% (55 divided by 66).
It seems that the Rate formular still uses the SUM of child ship 555555 (165 diveded by 66).
Anyone an idea how to get the "wanted result" of 83% ?
Thanks for all replies in advances (points will be assigned).
Axel

Hi,
As far as i understand the issue is with the child ship keyfigure in that you have selected calcualte result as average which is only for display purpose that result cant be used for futher calculations.
If you want to calculate the average make use of exception aggregation.
Make a new formula and put you keyfigure for which you need to calculate avg. then hit Aggregation tab---Exception aggregation as average and refernce characterstic choose on which you are getting unique set of values.
Then continue with your other steps.
Hope it helps.
Regards,
AL
Edited by: AL1112 on Jun 8, 2011 2:35 PM

HT3131 Why doesn't Apple mention using the Display control panel's "Arrange" feature to move the menu from the Macbook's display to the EXTERNAL display? THAT'S the real answer to make Clamshell mode work, but it's not mentioned in any Apple documentation

After a recent OS update, Clamshell mode quit working. I couldn't find any Apple documentation
that would help. So many people were stabbing around in the dark, until I finally found the following information
that is lacking from any Apple documentation that I've been able to find.
Here's what I found to be the most helpful:
Forcing a MacBook to use the External Monitor:
I tried about everything: Rebooting, switching off completely, removing and inserting the Thunderbolt->HDMI adapter etc.
The only thing that finally worked was the following:
1. Take it out of the dock and connect to Power and HDMI to the TV.
Shut down the Mac. Turn it on and close the lid. It will now boot up on the external screen.
Log onto the Mac, and put it in sleep mode (Option-Command-Eject).
Put it back into the dock and wake it up with the spacebar.
It should be OK now... until the next update...
Note: One indication that you’re going to have extreme trouble with this is when (occasionally and without reason) the Mirroring Options icon shows up on the top icon bar.
Other useful commands:
“Command + F1” puts PC in Two-Screen MIRROR mode.
If it’s REALLY being stubborn, do the following (Clamshell Must be open
to see the arrangement tab.):
In System Preferences > Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor (Yes, I know, it’s hard to grab ahold of it...) That will make your EXTERNAL monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV, make sure it’s asleep (Option+Command+Eject buttons) or your Menu Bar will automatically change back to the MacBook.

After a recent OS update, Clamshell mode quit working. I couldn't find any Apple documentation
that would help. So many people were stabbing around in the dark, until I finally found the following information
that is lacking from any Apple documentation that I've been able to find.
Here's what I found to be the most helpful:
Forcing a MacBook to use the External Monitor:
I tried about everything: Rebooting, switching off completely, removing and inserting the Thunderbolt->HDMI adapter etc.
The only thing that finally worked was the following:
1. Take it out of the dock and connect to Power and HDMI to the TV.
Shut down the Mac. Turn it on and close the lid. It will now boot up on the external screen.
Log onto the Mac, and put it in sleep mode (Option-Command-Eject).
Put it back into the dock and wake it up with the spacebar.
It should be OK now... until the next update...
Note: One indication that you’re going to have extreme trouble with this is when (occasionally and without reason) the Mirroring Options icon shows up on the top icon bar.
Other useful commands:
“Command + F1” puts PC in Two-Screen MIRROR mode.
If it’s REALLY being stubborn, do the following (Clamshell Must be open
to see the arrangement tab.):
In System Preferences > Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor (Yes, I know, it’s hard to grab ahold of it...) That will make your EXTERNAL monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV, make sure it’s asleep (Option+Command+Eject buttons) or your Menu Bar will automatically change back to the MacBook.

Using the Currency Symbol in the Layout tab of the Display Template

Similar Messages

Maybe you are looking for