Using the Dell 1505 wireless card in the MP

I just installed the Broadcom 4321 card in my MP and would like to get rid of the "third-party wireless card" card type in the System Profiler and have it say the more accurate description of what it really is. This card was sold as a Dell 1505 card so I imagine this is why it comes up as a "third party card" in the Profiler.
Other than that, it's working great.
Does anyone know how to do this?

Nope. Been there done that. I have both "genuine" Apple and the Broadcom card. Purchasing the "real" Apple card is practically extorsion to get the very same thing as this BCM card. Even FastMac admits to the BCM4321 being what they sell...but at 89 bucks. Didn't want to go that route. 20 bucks new sounds much better to me.
I'll put up with the generic description. Small price to pay.

Similar Messages

  • Does a NETGEAR - Wireless-N Router work with a the dell mini g card?

    I want to purchase a dell laptop with a dell mini g card. Will the Netgear Wireless-N Router Model- WNR2000 work with it? It's extra for the dell mini n card. I don't want to have to pay extra for that if I don't have to. Thanks

    Unless you are transferring a large amount of data between computers or a media device attached to a home theater system, wireless N is merely going to give you better range.
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • Can I use the iPone 3gs SIM Card with the iPad 2?

    Can I use the iPone 3gs SIM Card with the iPad 2

    The iPhone 3GS uses a full size SIM card.
    The iPad uses a micro-SIM card.

  • HT5622 Can I use a reloadable prepaid credit card at the itunes store?

    Can I use a reloadable prepaid credit card at the itunes store?

    Welcome to the Apple Community.
    Yes, I believe so in most locations.

  • To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD.---I am using a Dell and can't import the CD I need because the window doesn't automatically pop up.  How do I fix this?  Any thoughts?

    "To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
    I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

    You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
    If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
    tt2

  • HT1725 Used $20 music iTunes gift card. redeemed the $20. but when it went to payment method , there was no inclusion of redeemed card or Store credit. ps I am in AUSTRALIA

    Used $20 music iTunes gift card. redeemed the $20. but when it went to payment method , there was no inclusion of redeemed card or Store credit. ps I am in AUSTRALIA

    Is Settings > General > Restrictions > In-App Purchases: ON (green)?
    Some In-App Purchases works only with credit card.

  • Can I use my parent's credit card for the billing information under my name?

    Can I use my parent's credit card for the billing information under my name?

    You can use whatever nickname that you want to use in the game center. You can change it as well. It shouldn't matter what nickname you use if that's what you are asking. Other people playing games are not going to know that you or your parents or whoever is the card holder. That name identifies you for social games and notifications, achievements and that sort of thing.

  • Recent News on How to upgrade the 802.11g Wireless Card to a 802.11n Card

    Hi everyone!
    I have a macbook Core Duo (not core 2 duo) and I want to buy the new airport express. I was really upset to see that I will not gete the performance upgrade of the n technology on my new computer. Finnaly I saw this post on AppleInsider
    http://www.appleinsider.com/article.php?id=2510
    It says that you can replace the wireless card in the Macbook with a card from the Mac Pro (the same size and same amount of antenas) and the n technology would work (and increase speed and performance).
    Here is how to do it:
    http://www.hardmac.com/articles/71/
    Has anyone done this yet? Does it work? Is there a violation of Applecare by doing this? Where would you get a n airport card for the MacPro?
    Any ideas on this subject would be great!
    If it is true and leagl, then I would be very happy.
    Message was edited by: AlwaysApple

    As to your question about a 'violation of Applecare...' it was already answered in your first link...
    "A quick warranty-voiding disassembly later..."
    Macbook 1.8-)   Mac OS X (10.4.8)   Week 38 base model w/1G Ram

  • Using Extreme as a wireless card

    I have a G4 Dual 800 with no Airport card. I also have a UFO Airport Extreme Basestation.
    Can I connect the basestation to the G4 and use it as a wireless card to connect to my network?
    Does that make sense?

    You cannot use the AirPort Extreme Base Station (AEBS) directly as a replacement wireless adapter, but (if your wireless network is created by another AirPort) you can create a Wireless Distribution System (WDS) between them. This would allow the AEBS to wirelessly extend the wireless network of the other AirPort AND enable its LAN port to allow the G4 to access the network/Internet.

  • Possible to use non-AT&T wireless card with iPad??

    Thinking of getting an iPad, however I travel frequently and after looking at the outlandish prices for international data plans, I am about ready to give up on the idea. Anyone know if it is possible to use a non-AT&T wireless card with the iPad? I'm guessing there would be a compatibility issue of some sort.

    The 3G iPad is not locked to a particular service provider. You can get a local Sim card and data plan in many countries. This article will give you some idea of what's available: http://gigaom.com/2010/05/10/ipad-data-plan-guide/

  • How can I connect the output of a force transducer unit(BNC cable) to the PCI-6036E DAQ card via the SCB-68 block connector?

    I m using the 404A force transducer unit by Aurora Scientific and i want to connect the (converted to Volt) output, which is a BNC cable, to the PCI-6036E DAQ card via the SCB-68 connector block, facing difficulties in choosing the correct input mode for my signal(couldn t clear this using the manual), setting the switches and which channel shall i use in the block connector in order to configure ot with LABVIEW

    Hi MSc Student,
    Connecting your transducer to the 6036E card via the SCB-68 connector block should be pretty straight forward. You have 2 choices of input mode, Referenced Single Ended (RSE) this is where you will connect the screen of the BNC cable to a ground connection for the DAQ card in the SCB-68 and the other to any analogue input channel . These are listed in the device pinouts in the help section of MAX, under the 68 pin devices section. The terminal block numbers correspond to the DAQ card's pin numbers. Another method, which avoids ground loop problems would be to use the Differential connection and connect the signal and ground connections of the BNC cable to a differential analogue input, these are listed in the 6036E manual and in th
    e MAX help section again. the disadvantage to using this method is 2 analogue input channels are used and you must use the lowest 8 analogue input channels for differential inputs.
    The switch settings that you need can be found in the manual for the SCB-68 in table 2-1, the manual can be found here : http://www.ni.com/pdf/manuals/320745b.pdf
    The switches are for power to extra signal conditioning and the cold junction compensation for thermocouples which in your case you do not need so set the switches to the positions in the first box ie Direct feedthrough, with temperature sensor disabled and accessory power disabled. The channel you use should not matter the only ting to remember will be that if you use differential mode measurement that you will be connecting the signals to AI(n) and AI(n+8) so differential input 0 is across the connectors for AI0 and AI(8). The channel numbers corespond to the analogue input number for the card.
    I hope this information helps,
    Chris M
    App
    lications Engineer, National Instruments

  • My keyboard clicks and ringer volume have disappeared. I have tried plugging in the head phones many times, blowing air in the headphone jack, credit card in the charger jack, everything on you tube basically! To no avail! Any suggestions?

    My keyboard clicks and ringer volume have disappeared. I have tried plugging in the head phones many times, blowing air in the headphone jack, credit card in the charger jack, everything on you tube basically! To no avail! Any suggestions?

    Hi Bones777,
    Thanks for visiting Apple Support Communities.
    If you do not hear sound from your iPhone speakers, try these steps next:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If you still do not hear sound after completing the troubleshooting above, I recommend backing up your iPhone data and restoring the iOS software:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Best Regards,
    Jeremy

  • Thanks for yr reply sofar that is clear and indeed, after I  changed the details at my apple ID account from the old Dutch credit card to the new Suisse credit card when I wanted to update my existing apps on the iPhone, I got the message that I can only

    thanks for yr reply
    sofar that is clear
    and indeed, after I
    changed the details at my apple ID account
    from the old Dutch credit card to the new Suisse credit card
    when I wanted to update my existing apps on the iPhone, I
    got the message that I can only use the Suisse Apps store.
    But how does that work?? Can I still update my existing Apps ?? How can I make my iPhone connects to the Suisse App Store ??
    thanks
    Best regards 
    [email protected]

    HI..
    I responded to you here >  https://discussions.apple.com/message/18112516#18112516

  • HT204088 ONCE AGAIN  I BOUGHT IT UNDER "email" = vicfer@**** with many more APPS it is now "vicserfer@**** ...  but the name of visa card is the SAME  for VICTOR FERREIRA

    ONCE AGAIN  I BOUGHT IT UNDER """""""email"""""""" =
    vicfer@**** with many more APPS it is now """"""""vicserfer@****...  but the name of  visa card is the SAME  for VICTOR FERREIRA
    <Email Edited By Host>

    Apple is not here. Apple does not answer questions here. Apple does not acknowledge personal issues with your account here.
    Everyone here is a fellow user and we don't have enough information in this rant to understand what the issue is so as to make recommendations of possible solutions.

  • I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

    I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

    Use this for help from iTunes https://expresslane.apple.com/GetproductgroupList.action. This is where you need to get assistance.

Maybe you are looking for

  • Converting a text file into a String

    I need to convert a text file (in whatever format, in my case it would be xml and xsl files) in a String. I made this methods: public static String createStringFromFile(File f) {         StringBuffer buf = new StringBuffer();         try {           

  • Normal phone numbers are not being recognized as v...

    I don't understand why, but everytime I try to skype numbers I've skyped before and other numbers like customer service to sprint, etc i get a notice that says this is not a valid skype name or number... My skype number is from the US but I'm in Arge

  • Dock vs. Mono to RCA Output for iPodding my car

    I'm putting an interface in my car that adds RCA input so I can play my iPod, now the only thing to do is get an RCA converter cord for the iPod. I've looked around, and found that in addition to the normal mono (headphone port) to RCA converter cord

  • How to set isolation level for BMP

    Hi. We're trying to avoid the ORA-08177 by setting the isolation level in the weblogic-ejb-jar.xml to READ_COMMITED Still (looking in the jdbc.log) it seems that weblogic set the transaction isolation level to SERIALIZABLE The xml : <weblogic-enterpr

  • JSF Data Table

    I have the following requirement. I have DataTable with the following columns. |Status | Institution | State | Country | Major |Degree | Date status is drop down with values " ' ','completed', 'attended' " (note one of the values is empty). Each of t