Using the disk to disk recovery tool to image a new hard drive

I have a new SSD hard drive that I am installing and want a fresh version on Win 7. I plan on using my existing hard drive just for data and to maintin the recovery partion in case I need it again. I want to do a disk to disk recovery. I get to the point in the Recovery 4.3 software where it prompts me to confirm I will loose all my data on the partition, but I do not see where it allows me to choose the new hard drive. I do not want to loose my data so I exited out. Did I not go far enough into the processs to allow me to choose the hard drive? I have not found a manual for the recovery tool to show me what's next. I have the new hard drive installed in the ultrabay.
T410i
Thanks,

Check on your HDD win 7 RNR if you have the Create Product Recovery option. This will back up the Recovery Partition. First disc is bootable recovery, you can use a CD. Second disc is data, try a DVD for this. It may create a 3rd disc.
When you get done, you want a recovery partition on the SDD. The recovery bootable and partition are fairly small.
Thus, when you use these disc to populate the SDD, you have a recovery partition on the SDD.
When I ordered my PC, I ordered 2 HDD's 120GB and 320GB. Windows does not let you select where the operating system goes to. It uses the first HDD it finds (which might be your win 7 Hdd!!). In my case, it came from the factory with (vista) on the 320GB. I had to swap them, similar to what you are doing. I used the Product Recovery disk set AND had to disconnect the 320GB for the recovery to go to the 120GB.
What size is your HDD and SDD? I would take backups of your Win 7 system. Last thing you want is a messed up win 7 HDD. If all works, you will have a bootable HDD and SDD and might have to decide which one to use every time you boot up.
Down the road, when SSD is as you like it, copy the HDD data over to the SDD. Erase the HDD, then copy the HDD data back over. Thus HDD is truly a second hard drive(data drive).
Side note: The placement of the New win 7 is dependent on the Logic of the Recovery partition. I would guess where ever the Q drive is created, that is where the operating system is going to go. Could be Win7 install (standalone win 7 install DVD) logic Now allows you to choose Hard drive 1 or Hard drive 2,

Similar Messages

Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?

I tried to customize the Envy 15t but I can't proceed on upgrading the following.
Error
24GB SSD Acceleration Cache requires purchase only up to 8GB System Memory.
Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?
Can HP explain this to me? or any one? please

Hi,
The 24Gb cache drive will store manything and normally it will need at least twice the size (capacity) of RAM. Double 16Gb is 32Gb therefore 24Gb is not big enough.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!!

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!! Shouldn't that be covered by warranty?

My newest Mac just did the same "folder of death" dance. It's too late for you now, but you might consider a passport backup drive.You can get 2&3 T-bytes now fairly reasonably priced. A given with computers is they will crash, just a question of how bad and when, so you can be prepared for the next time.

Disk Utility in Internet Recovery mode cannot properly detect new hard drive

I intend to format my new hard rive and install OS X into it.
Here is my problem, I bought a new 1TB HGST 7200rpm hard disk and put into the macbook. I boot up under Internet recovery mode, under the disk utility I tried format to MacOS Extended Journaled but it takes ages (stuck for more than 15 minutes). I simply just cannot get the macbook to read the drive under disk utility from Internet recovery mode.
Here are the things that I have tried:
1. Boot the MacBook from old drive, successfully use the disk utility to zero out format (MacOS Extended Journaled) with 1 partition (GUID). But when I boot the Mac under Internet recovery mode, the disk utility simply cannot mount the drive.
2. Restore the new drive (as an external drive) from the old drive using disk utility, successfully restore. I could startup the new disk as an external drive, but when I put it into the Mac it shows flashing folder. I waited for more than 30 minutes, the flashing folder just stays there.
3. Boot the MacBook on Internet recovery mode and connect the new drive as external drive, no problem. I reinstall OS X into it but it midway it stop and error message says something like cannot add additional components.
Not sure what is the problem, I think I have exhausted all method. There is no issue with the new hard drive and MacBook.

The MacBook is early 2013. It came with 1TB Mountain Lion, I left the DVD in my country so I don't have it with me. How do I download the installer? the Mac App Store only lets me upgrade the OS to Maverick.
I have tried to restore the new drive from my old drive, but the only way is to use Internet Recovery. The Disk Utility boot from the old drive OS (Mountain Lion) does not allow me to restore my new hard drive from the old (current boot) drive, the message instruct me to use the Internet recovery mode. From here I can see my new drive format as GUID, but when I boot to Internet Recovery the Disk Utility recognised my new drive format as Master Boot Record instead of GUID...?????

Using ipod classic to store complete library to transfer to new hard drive:

My itunes files are about to outgrow my hard drive.
Can I use an ipod classic (7th gen) to store my entire library, and then, after installing a larger hard drive, "re-copy" my library from the ipod onto the new hard drive?
And would it retain the file structure from the original hard drive?
THANKS!!!

Hello thomaejacobi,
And welcome to Apple Discussions!
Yes. See this article for more assistance and instructions on how to do this. It says to a new computer, but is pretty much the same situation for you. Simply back everything up to your iPod, and then copy it back over once the new larger HD has been installed.
[How to use your iPod to move your music to a new computer|http://support.apple.com/kb/ht1329?viewlocale=en_us]
And would it retain the file structure from the original hard drive?
Yes.
B-rock

Run out of Hard Drive space using Premiere Cs5- Can I save my work, buy and new hard drive?

I am in the middle of a project using premiere cs5 and I have run out of hard drive space. Can I save it, buy a new hard drive and install Premiere and then reopen it again without it effecting my project?

If you are talking about only having one drive for Windows and programs AND video data and project files, a better option is to buy a second drive and move your projects and video data files to the new drive

HP Recovery Manager won't recognize new hard drive

Hello,
I have a HP Pavilion TouchSmart 14-b173cl Sleekbook. I purchased a new hard drive and I have ordered a usb recovery kit from HP.
Howevery, when I try to run the recovery manager, it gives the message no hdd.
Also, if I try and do a hard drive check, it says not installed. It does not detect the hdd. However, if I put back the original hdd and run the recovery manager, it does recognized it and allows to start the recovery process.
Can anyone help me with this issue? Why does the laptop does not recognize the new hard drive?
Thanks!!!

Hi there
So nothing of my suggestions really did bring any improvement for you I suppose: (
These are the last suggestions I have -
Update BIOS and chipset from your product download site & try putting new HDD again.
Bios:
Updating BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00042629
Latest version (Windows 8, Intel processor):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135598-1&cc=us&dlc=en&lc=en...
Intel chipset:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112630-1&cc=us&dlc=en&lc=en...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Having problems using window 8 recovery disc to install on new hard drive

My hard drive crashed bought a new ssd and installed it and tried to install using my recovery discs and get to 75% and get error message 0xe0ef000e. Have done hard drive test and shows passed. was wondering if it is possible to use recovery discs to install on new drive and any sugestions on what i am doing wrong

My hard drive crashed bought a new ssd and installed it and tried to install using my recovery discs and get to 75% and get error message 0xe0ef000e. Have done hard drive test and shows passed. was wondering if it is possible to use recovery discs to install on new drive and any sugestions on what i am doing wrong

How to install a recovery partition after installing a new Hard drive? and FileVault help.

Hi,
I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
If there is a solution to solve both these issues, or any one issue it would be appreciated.

The formatting being referred to is actually the presence of the Recovery Disk.
You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

How to recover HP recovery manager after replacing a new hard drive

Recently i've got alot of BSOD saying Bad_System_Configuration_Info, and i ran a hp start up test and my hard drive failed the short DST test, so i searched online and it says that it means my hard drive is failing.
im planning to buy a new hard disk. i dont have a windows disk to recover my windows 7, so i wanted to copy the hp recovery partion from the old drive to the new one. i dont know how to do it, i wonder if anyone knows. i dont have any recovery disks and i dont think i can order one so i want to restore my new hdd without using disks and using my old hdd`s recovery manager from hp
i bought the computer in US but i moved to china so im assuming that i will buy a new HDD that is not from Hp ? i dont know if this will still work cause i hear that it has to be HDD from hp to work
This question was solved.
View Solution.

Hi,
Here's an alternative option you can use.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - ie Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

HP Recovery manager re-install on New Hard Drive

I had to get a new Hard Dive due to the original unit died. I need to re-install my OS but I dont have the cd's. What can I do to resolve this?

Hi,
Please use the following instructions:
http://support.hp.com/au-en/document/bph07143
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Very elementary doubt, but... can i use the rest free space of Airport Time Capsule as a Hard Drive (copy and paste files freely, from my MacAir SSD to the Time Capsule), besides use it with Time Machine at the same time?

Cant find it clearly in tutorials...

You can do it.. should you do it is another question.
Store files on the TC.
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. Think this out very clearly.. how and to where are you going to backup your files. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
The following are controls on the hard disk side.
Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
Even apple btw say don’t do it.
http://support.apple.com/kb/TS5168 Although mostly about FAT32 it adds network drives.
5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

I need the unconfusing way to put a password on a external hard drive, please

it seems the more i look the more confusing things got. basically i have a new hard drive ( g drive mobile usb ) i want to put a password on to it so that if you do not know the password you will not be able to access ANYTHING. it seems like there is either a tutorial on how to put a password on to a 'folder' & when it comes to a 'harddrive' the term 'password' is now 'encrypted' & it just seems like there is a difference in the explanation. also people seem to say "thumb drive" a lot & i know that i am not talking about a thumb drive, i am using a hard drive, maybe it is all the same but nobody is saying so & i don't want to find out that a password on a folder or a thumb drive is totally different when it comes to using a hard drive.
so, how do i put a password onto a hard drive so that when i plug in the usb cable you will next have to type in the password to see anything on the hard drive??
just updated to mavericks by the way

If you want to protect everything on the drive, then you need to encrypt the drive.
Don't store the password in your keychain as that will automatically decrypt the drive when it is connected.
Here is an article written for mountain lion, but I think it is the same for mavericks.
http://m.imore.com/how-easily-encrypt-external-drives-os-x-mountain-lion
Another here: http://osxdaily.com/2012/09/17/how-to-encrypt-an-external-drive-quickly-in-mac-o s-x/
I'm not sure if it is stated directly, but the drive must be partitioned as a GUID partition table.
If just want to encrypt some of the data, http://osxdaily.com/2012/01/11/password-protect-files-folders-in-mac-os-x/

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Using the disk to disk recovery tool to image a new hard drive

Similar Messages

Maybe you are looking for