Using the DVI output on a NX6200TC-TD card for HDTV projection TV

Hi,
I just got a new system on which I have the NX6200TC-TD video card. I am trying to use the DVI output with a DVI-HDMI conversion cable for my HDTV projection TV as a secondary screen. My primary screen is a small 15" LCD. I use teh "Clone" mode to have the same thing on both. Here are my two problems:
1- The picture on my projection TV is too large for the screen. The icons on the left are only partly visible, and I cannot see the toolbar at the bottom of the screen.
2- The picture is really blinking. I think this is becaused of the fixed 60Hz refresh rate?
I tried several things with the extended NVidia display settings. One problem I have is that I have difficulty to change the settings on one specific display. It seems like no matter what I do (like selecting the secondary display), the changes are applied to the primary display. Also, when I am using the HDMI input on my TV, I cannot change the display size on the TV (fixed to full screen).
The resolution on the LCD is 1024 x 768 and the HDTV is in 1080i mode. I tried all other HDTV modes, but it did not fix my problems.
Any help would be greatly appreciated!
Benoit

I see...
Another solution that would really help would be the ability to easily switch from one screen to the other. I have that on my laptop: special key shortcuts allow to turn off the LCD and turn on the external projector, and it uses pre-defined settings for each screen. Difefrent settings are possible because they are not on at the same time. Is there something like this available with that card? Would that be a card feature, or a system (motherboard) feature?
If that is not possible, I would be satisfied if at least I could fix the border problem on the HDTV screen, even thoughthe LCD screen becomes smaller. Is that possible? Basically I want to make sure I get a good picture on the large screen.
Thanks!
Benoit

Similar Messages

Connecting an Xbox using the DVI to Video adapter to a Display

I have a second display (Vision 17'' TFT LCD Display) and I love using it with my Power Book using the DVI out. I also have a PC that shares this display through a VGA input port also on the display. Anyways, I want to use the display for my Xbox which has the three component cables. To do this, I was planning on using the "Apple DVI to Video Adapter" but Is this possible? I know it works if the signal is going out the DVI port to an external display but does it work in reverse? In theory I would have the Yellow video cable going to the adapter and the two audio cables going to a "Y" stereo mini cable into the audio in port on the monitor. Possible? Other ideas? Thanks.
-Daniel

no, it won't work. the adapter does not transcode any video signal, it simply connects the appropriate breakout to the analog lines that are already present on the Mac's DVI output, as per the DVI-* spec. unfortunately, it will not work in reverse.
someone at Microsoft has claimed that the 360 does support HDMI and DVI, but the cable is simply not available yet. I find this comment somewhat suspicious, because the demand IS there already, and there is a HUGE base of people waiting for this.
MS does support VGA output now, so you could use a 2x1 VGA switcher to share the VGA input between the PC and 360. I would also get a KVM that supports audio. there are lots of options out there and they do not cost too much money. Y'ing the input on audio is not a great idea, because depending upon the impedence of the ins/outs, you might get a gain/distortion/bleed issue.

Problem using the DVI to Video adapter

I am using a MacBook Pro. I am using the DVI to Video cable to connect my MBP to the TV. It was working fine and I was watching movies and videos. Suddenly I am having problem and its not working.
I hooked up the DVI to Video adaptor on the PC side . Black and white signal which is blurred/blocked/and modes across the screen. I tried playing with refresh settings, resolutions, etc but nothing is happening
Even in the display I am not able to see the NTSC
settings anymore. When it was working before the display changes automatically once i connect the adapter. But now it refresh but the display is not changing. currenly my display is set to 1440 * 900.
any idea why the display is not working, is it a driver issue.

Have you played with the "Mirror Displays" option in the arrangement tab?

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa

Two print programs using the same output type in t-code v/40

Hi,
I am trying to use the same Output type RD00 to print diferent forms.
In t-code v/40 we can fill a second Processing but how this work?
Can someone tell me more about this?
The final goal is to print diferent forms according to different companies.
Thank you and best regards
João Fernandes

Hi,
It is not possible to have 2 different routines to be assigned to one output type in the procedure. I think when you say 2 routines, you are saying 2 logics or you are saying the subroutines KOBED and KOBEV of the routine.
In all reqmt routines, which is in discussion now, only one of the subroutines will be always called, though I dont know unfortunately which one is this. As you said, that only one of your processing logic works, that is the right subroutine area where the second logic should also be coded. So please move your code from the inactive subroutine area to the active subroutine area. Now you should be able to see both the validations being active.
Hope this helps. If the case is different, please let us know.

Actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my sterea amply does not have a digital imput.

actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my stereo amp does not have a digital imput. are there good converters available?

By default, your AirPort Express is using an internal DAC to convert the digital audio stream to analog when you connect an analog audio cable to it audio output port. You can; however, connect an external DAC to the same port using a optical digital cable and let the external DAC do the conversion for your stereo.

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card.

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
Personal info removed to comply with the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac? Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24. Can someone help me with this? - JML

Read this:
https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O.

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

As long as you buy from an Apple retail Store (Apple owned ) an unlocked iPhone 4S it will work on GSM services worldwide
from Apple.com
If you buy a SIM-free iPhone, you will need to purchase a GSM-compatible micro-SIM separately. When you travel internationally, you can use a micro-SIM card for iPhone 4s from a local GSM carrier.
The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint.
However the warranty will NOT be valid outside the US .If you need warranty or post warranty service you will have to return the iPhone to the US in person ( cannot mail in to US )

Using the DVI output on a NX6200TC-TD card for HDTV projection TV

Similar Messages

Maybe you are looking for