Using the EOS utility with Windows 8

I am setting up a brand new Windows 8 desktop machine tomorrow.  With an Intel i7, 8 gb, 2tb and an IPS monitor, it was purchased specifically for photo editing.  Am I going to have a problem using the EOS Utility on a Windows 8 machine?  I am finding hints about a problem on the net, but not much specific information.  Thanks

WaltA, thanks for replying.  I am currently using version 2.11.4.0 EOS Utility.  Is that the latest?  It came with a brand new 7D.  My other camera is a T3i.  I replaced the version that came with the T3i on the old Vista laptop.
At this point, I am only using it for transfering photos to the PC.  
I have successfully loaded it onto the Windows 8 machine with no issues.  I haven't had a chance to run it yet, but there appear to be no problems so far.
Thanks again.  

Similar Messages

  • Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

    Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?

    Yes. After Windows/Bootcamp discovers  your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
    Then check the mouse drivers box and your device should work. (I located this solution on another thread)
    It works for both the Magic Mouse and Magic Trackpad.
    Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
    Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
    It's Windows.

  • How to use the FP 3000 with windows XP?

    Hi to all,
    Actually I have a problem using My FP-3000 nifbus with a windows xp proffetional station.
    previously I was using it with nifbus configurator and communication manager, both of version 2.3 and then I upgraded to 2.3.6 (using windows 2000) and now I am trying to use it with windows xp, but the configurator does not communicate with fp-3000 and it doesn't show any function blocks.
    I started by installing the 2.3 configurator and manager, but the PCMCIA fbus/2 card that I'm using was not recognised by windows.
    so I upgraded to 2.3.6, the pcmcia card was now recognised by windows but the communication manager kept giving a communication error.
    so I installed the communication manager version 3.0, which started successfu
    lly and the configurator started but the fp-3000 was not present.
    I tried updating the firmware, but the upgrade.exe did not disfunctioned and gave strange module names in the window, and it did not download the firmware.
    I also tried resetting the fp-3000 but still no luck.
    so any one can tell me what software and what versions should I use to overcome this problem?

    It sounds like a problem of advanced network parameter settings.
    You can start "Interface Configuration Utility", choose the port and select "Edit", then choose "Advanced..." button to have "Advanced Stack Configuration" dialog.
    Change values to:
    T1 0x40000,
    T2 0x40000,
    T3 0x30000,
    Slot Time 5
    Click OK to close "Interface Configuration Utility", and run NI-FBUS CM or Configurator to check whether it helps.
    If you have 3.0 or 3.1 version, you just choose the "Old Default" button to set the values automatically.

  • Using the Apple Remote with Windows Media Center

    Hello guys
    First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
    So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
    Thank you

    I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
    Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
    In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
    If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
    http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b  
    and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
    The Hauppage USB was a good choice because it serves Mac & Windows.
    Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
    http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
    Although this may not answer your question, it describes other options.

  • Can I used the same MSN  with Windows and Mac?

    I have a emachine PC. And I just purchase a ibook G4. My concern is: I am about to connect to the internet witn MSN. Can i used the same with both, Mac and Windows? I mean, the same internet connection?
    LightBearer.

    All you'll need is a router. You can get a wireless one or a wired one. They're pretty cheap.

  • Using the Mac camera with windows

    I'm trying to use Windows Messenger on the Windows side and can see the other party video but cannot get IM to recognize the camera built into the Mac. IM asks for a USB base camera but I'd like to use the built in one. The Mac version of IM does not support video I understand.
    Any ideas?

    Yeah, make sure you have the latest version of BootCamp
    this is the link http://www.apple.com/macosx/bootcamp/
    if you don't already have the latest version, simply download the new version, and burn a new macintosh drivers CD. Go to the windows side and install the Macintosh Drives and you will not only be able to use the camera, but when you cammand + click, it will act as a right click, however, they need to fix a bug with the command click, once you "right click" normal clicking is rightclicking. it seems that command clicking switches the function of the mouse button.

  • How can I use the setup utility with my gaming adapter?

    How can I use this program (the cd that came with my netgear wireless game adapter) to setup my gaming adapter? I want to configure my gaming adapter but it seems like i cannot do so? How can I achieve this?

    Hi again,
    thought a bit about this...
    This thing looks to me like a special sort of wireless router with one ethernet port, which also is a bit old I guess.
    With nowadays wireless router, the configuration usually is made using a Web-Browser like Safari or Firefox and accessing the router through a built-in webpage.
    The IP adress of the router is also usually 192.168.0.1.
    Have a look inside the Netgear-Documentation, to see if this also possible here.
    Stefan

  • Can I use the Disk Utility Application to backup bootcamp windows 7?

    Can I use the Disk Utility Application to backup Bootcamp that has Windows 7 on it?  If I install a new blank drive, I would like to know that using Time Machine I can get the MAC OS back and using the Disk Image Utility I can restore Bootcamp with Windows 7.

    NO.
    You have to use Windows or a Windows utility.
    There are programs that will clone an entire drive (sector) as well.
    DU does not though. Paragon does support Boot Camp.

  • HT4623 I have an apple ID account with $25.00, I purchased an kids game app {plants vs zombies},  the app shows up as purchased and downloaded but I can't get it to start. I'm using an Hp laptop with Windows 8.

    I hav an apple ID account with balance of $25,00. I used .99 to buy gameapp for grandson. We also downloaded a freebie or two. The games show up under the apps purchased.  However I can not get the games to start using my HP laptop with windows 8.  Any suggestions on how to play games purchase thru the Apple App Store but played on android deices.? Tkx

    You can only use apps from iTunes on iPhone devices.
    If you want apps for Android devices then you'll need to download the app on the Google Play Store on your Android devices.
    If you don't have the Google Play Store you could dowload if from Google.
    Windows 8 also has there own App Store.

  • I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

    DesertCatVicki
    I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • To add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC

    Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB

    4Buck5 wrote:
    Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB
    I am not 100% what isn't allowed.. but I am assuming you want to spread the backup across the two disks.. internal TC and 6TB external.. this is not possible.. It has to be one or the other. TC has no way to build a raid JBOD or anything else. Nor would you want to as that is the most likely to fail and kill your data.
    Let me add, backing up 6TB over USB on TC.. will be the most excruciating experience of your life.. cf child birth or passing kidney stones.. large ones.. being the male equivalent.

  • I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

    I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

    That's not easy.  The Windows migration tool makes a new user account, and you can't prevent it.
    You may be able to transfer what you want manually, but it's not quick or easy.  See Transferring files from one User Account to another.

  • How do I use the km utility to get a working Swedish keyboard at inst?

    Hi,
    This is my initial post on this forum. I'm interested in archlinux as I find "the arch way" appealing, however I'm faced by a little problem first thing during the setup. It wasn't easy choosing between newbie corner and the installation forum, after consideration I picked the latter.
    I want to install archlinux on my Acer Aspire 1642ZWLMi, which has a swedish keyboard layout. I want to be able to use the swedish characters åäö during and after the installation phase.
    The installation CD suggests that I should run the km utility and pick my keyboard layout and a corresponding console font. How do I find information on which ones to choose?
    I have tried some of the layouts with the prefix se- (there are four) but I don't know which console font that has the necessary characters. Even if I managed to pick the correct layout I might very well have chosen an incompatible console font to go with it.
    Thanks for reading my post. I would greatly appreciate any help I can get!

    Thanks for trying to help me. Though I had already tried the suggested combination of keyboard layout and console font using the km utility.
    When I run the km utility first thing during install and choose 'se-lat6.map.gz' as keymap and 'lat9w-16.psfu.gz' as console font it still doesn't work. When I type åäöÅÄÖ on my keyboard åæøÅÆØ is displayed in the console. My search results are telling me that æ and ø are the danish (and some other languages) equivalent to ä and ö.
    It is also worth giving emphasis to the fact that the km utility just lets me choose keyboard layout and console font. Which means I'm unable to set any consolemap.
    If it's not possible to get swedish characters to work during the installation process I guess installating archlinux first and configuring the keyboard, console font and console mapping later is an option.
    How did people from outside the US/UK perform their install? And more specifically in my case, people from Sweden?
    All suggestions are welcome! I'm quite eager to try out archlinux.
    Last edited by tnek (2008-06-11 21:25:35)

  • TS1363 My ipod 6th generation is not coming up in my devices with itunes. I am using a new computer with windows 8 and it is shoing up in my computer  but not in itunes.  any suggestions

    My ipod 6th generation is not coming up in my devices with itunes. I am using a new computer with windows 8 and it is shoing up in my computer  but not in itunes.  any suggestions

    I am having the exact same problem but as yet have not found a solution.

  • Help needed in using the DocCheck utility

    Hi
    Can somebody help me to use the DocCheck utility.I need to check that all the java files have the required javadoc tags and they are correct.
    I have downloaded the zip file and I have been giving the following commands
    c:\javadoc -doclet com.sun.tools.doclets.doccheck.DocCheck -docletpath c:\svk\jdk1.2.2\bin\doccheck1.2b1\lib\doccheck.jar -sourcepath<full path with the file name>
    But I get the following error message : No package or class specified.
    I also tried giving the following command:
    D:\SegaSource\sega\src\com\sega\account>javadoc -doclet com.sun.tools.doclets.do
    ccheck.DocCheck -docletpath d:\jdk1.3\doccheck1.2b1\lib\doccheck.jar User.java
    But I get the following message:
    Loading source file User.java...
    Constructing Javadoc information...
    javadoc: warning - Import not found: com.sega.account.address.Address - ignoring
    javadoc: warning - Import not found: com.sega.account.icon.Icon - ignoring!
    javadoc: warning - Import not found: com.sega.common.DateUtil - ignoring!
    javadoc: warning - Import not found: atg.nucleus.GenericService - ignoring!
    javadoc: warning - Cannot find class com.sega.account.icon.Icon
    javadoc: warning - Cannot find class com.sega.account.address.Address
    javadoc: warning - Cannot find class com.sega.account.MasterManager
    7 warnings
    please help
    Thanks
    SVK

    I have never ran the DocCheck from the command prompt, so I really don't know how to do it, but I do run it succesfully using ant (build tool from apache - jakarta, if you use tomcat you already have it installed).
    So.. if you do use ant.. this will help:
    <target name="doccheck" depends="prepare">
         <javadoc
              packagenames="${packages}"
                    destdir="${doccheck.home}"
              doclet="com.sun.tools.doclets.doccheck.DocCheck"
              docletpath="${doccheck.path}" >
              <classpath refid="project.classpath"/>
              <sourcepath refid="project.classpath"/>
         </javadoc>
    </target>If you don't use it.. I guess I was of no help, sorry.
    Ylan

Maybe you are looking for

  • CProjects 4.0 - SAP R/3 4.7 - Accounting Integration problem.

    Dear all, I have performed all steps necesaary for accounting integration in cProjects and SAP R/3 FI System. I can even see and assign the cost rate that I have created in cProjects to a project role. System also calculates the  cost for the role mu

  • Want a magnifying glass button in table maintenance

    How can I get a magnifying glass button  in the table maintenance ?? help me out in this ASAP thanks in advance

  • Multi-touch, ibooks author, satisfactory outcome?

    A few months ago I was shown a multi-touch book made with ibooks author. I had published my memoir a year ago and realised early that distributors did not display indie authours. My book was completely invisible. I looked at the the multi-touch secti

  • Need comcast help

    Hi I need a little help I have Comcast cable internet connected to my imac. I just got a macbook and want to add a linksys wireless router. No big deal. I connect the cable modem to the router , and the imac to the router. Go into network settings an

  • Blur matte

    Hi I'm using premiere pro cs3. I'm trying to simulate a long lens out of focus " look " on a part of clip...  and using the tools and method as described in the tutorial "smooth skin matte tutorial" .  It looks like only the area inside the tv safety