Using the extra content from FCP7 on FCPx?

I have Final Cut Studio 3 (Final Cut 7) and Final Cut X on different startup disks just as Apple recommended back last year. Easy for me to do since I have a Mac Pro, so I followed Apple's recommendation, but how do I use the Apple Audio Loops for Soundtrack Pro from Final Cut Studio 3? I have the audio loops on a "data" HDD.
Can I use the templates and LiveFonts from Motion 4 on the new Motion 5?
Final Cut Studio 3 also came with 9GB of templates etc for DVD Studio Pro, is that in any way useful with FCPx? Could the DVD Studio Pro content be used with Toast or some other DVD/Blu-ray authoring/menu software?
By the way, I think I found all the extra content that came with Final Cut Studio 3, but to be sure I have them all, where are they all located?
Thanks for all your help!

I am not sure whether FCP X can use the .caf music but try them by navigating to them in the Effects browser or dropping them in the FCP X browser.
You can't use Live Fonts templates . . . except in LiveType and Motion 4.
The DVDSP content can only be used in DVDSP but that is no problem.
Simply export your video from FCP X in the correct format and use DVDSP as usual.
DVDSP content . . . /Library/Application Support/Final Cut Studio/DVDSP
Soundtrack content . . . /Library/Audio/Apple Loops/Apple
Motion content . . . /Library/Application Support/Final Cut Studio/Motion
LiveFonts . . . . /Library/Application Support/Final Cut Studio/LiveType/LiveFonts

Similar Messages

What is the price to upgrade from FCP7 to FCPX?

Does anybody know what is the price to upgrade from FCP7 to FCPX?

Note that FCX isn't an upgrade...it's a completely different application. Thus why you pay the full amount, although the price is less than FCP Studio.
Because this is a new app, you cannot bring FCP 7 projects into FCX...not without a third party utility called 7toX by intelligentassistance.com

Iphone 4s coming friday, what is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across.

What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.

First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem!

Using the External Content Type as a column lookup

Hi.
I am working on a solution that will get data from a web service (third party) and create a list in SharePoint Online (Office365 E3 subscription). The use a column from that list as a lookup column for another list. The reason for this is to allow updates
on the third party data source to update the list in Office 365.
Using SPD 2013, I created that external content type then created the list. However, due to the limitations on BCS (which I just learned after googling it) that the only thing I can use from this column is the ID column.
Has anyone found a work around on the matter? I was thinking of just creating a list app then load the bcs data to it. My problem will be how to update the list every so often.
Thanks!
Robert
Outsource Trainer

Hi,
According to your post, my understanding is that you want to use the External Content Type as a column lookup.
Per my knowleage, you can select all the columns in the external list.
You can create a lookup column in the list as below:
If you select Name, then you can get the Name column as below:
There is an article for your reference, although it is about the SharePoint 2010, it still works for SharePoint Online 2013.
Creating SharePoint lookups which get their data from a lookup
table in SQL (using SharePoint Designer, BCS and External Content Types)
More information:
Make an External List from a SQL Azure table
with Business Connectivity Services and Secure Store - SharePoint Online for enterprises
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Capture an image using the web camera from a web application

Hi All,
Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
I have a similar requirement like this,
1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
3) Upload the Image to the server from the temporary location.
Please share the details like, what can be used and how it can be used etc...
Thanks,
Suman

1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
Alternately, you might want to look into Adobe Flex for this particular application.

How do I sync my iPod to iTunes? I've used the final steps from Article HT1329, but when I open my iPod there is no "iTunes" folder.  Please help!

How do I sync my iPod to iTunes? I've used the final steps from Article HT1329, but when I open my iPod there is no "iTunes" folder. Please help!

Ah I see. That folder would only be there if you had perfomed the earlier steps in that section.
Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

Can i have 2 Apple IDs using the same playlist from the same pc?

can i have 2 Apple IDs using the same playlist from the same pc?

Easiest way is to create separate computer logins with all your own info including your own iTunes library.
I recommend each individual not have more than one AppleID because you will have purchases on multiple accounts
You can use more than one AppleID in an iTunes library.
AppleID/iTunes =used for purchases.
iTunes library = iTunes and all media on your computer.

How to use the pps function from JCOP?

Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
 readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
 //If no readers has a card it ends the process
 if(readers.isEmpty()){
 System.out.println("\nNo card in the reader...");
 return;
 System.out.println("\nReader Type: "+readers.get(0).toString());
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
 } catch (Exception e) {
 e.printStackTrace();
 System.out.println("ATR: "+toHex(atr.getBytes()));
 //sending a data 11223344
 System.out.println("\nsending data: 11223344");
 byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
 System.out.println("Response data is:" + toHex(responsesend));
 //close terminal
 term.close();
 System.out.println("\nTerminal closed");I've got this output on the console:
StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
Protocol and parameter selection not supported by this terminal!
 at com.ibm.jc.JCTerminal.pps(Unknown Source)
 at com.test.essai.main(essai.java:46)
>
And If I take a look at the data exchanged with the card:
Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM

-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 System.out.println("ATR: "+toHex(atr.getBytes()));
 jcard = new JCard(term,atr,0);
 jcard.reset();
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
 } catch (Exception e) {
 e.printStackTrace();
 }The same pps is always send after each reset...

TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?

Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device.

Using the Hard Drive from my old iMac

I have just purchased a new 2.8 Intel core 2 duo iMac and was wondering if I could somehow use the hard drive from my old iMac.
What I have done is buy a case for the hard drive from my old iMac thus making it an external. The question that I have is that since it [the old hard drive] is running OS 10.4 will my new Intel iMac even recognize it.
I would like to somehow switch ALL my vast iTunes library from the old hard drive to my new Intel iMac without have to resort to making as many as 15 data disk. If such a thing is possible how do I go about doing so?
Another thing that I would like to do once my iTunes library is on my new Intel iMac is use the old hard drive [since it is 500GBs] as the platform for all my games and my publishing interest. Doing so would allow me to free up space that I could more readily use for other interest on the 350GB hard drive that my new iMac came with.
HOW do I go about wiping the old hard drive clean so that I can use it thus?
Thank you all for any and all help and insight that you might give me.

You might also consider connecting the two computers into a network, and then transferring the files you need, or even keep both computers online and use network sharing to access files from both computers.
In reference to your question, if you extract the hard drive from your old Mac and put it in an external case, your new Mac will read it no prob. (10.4 is compatible with 10.5). The hard drive can be formatted (wiped clean) using Disk Utility application (click Application, Utilities).
In terms of importing files from old to the new Mac, you might consider using using the automated OS X feature to transfer user files from another Mac.

Can I use the value returned from a Text Function in another Formula?

I'm writing a report in Hyperion System 9 BI + Financial Reporting Studio version 9.2. I have 2 grids in my report.
Grid1 Column A is set up as a text function using the function type - <<GetCell("Grid2", 1, a, 1)>>. I would like to use the values returned from this text function in Column A (Grid 1) in a formula in Column B (Grid 1).
Is it possible to use the values returned in Column A of the text function in another formula? My report does not seem to recognize Column A as numerical values, even though the values to be returned are numerical.
If so, how do I recognize the values in Column A Grid 1 as numerical values and not text?
Thanks for any help you can offer!

Hi Edson,
Yes you need to use the CALC_ERROR macro function to be able to test whether the last macro function returned an error. CALC_ERROR will return an 'X' if there an error occured during the execution of the last macro function.
You can use a macro similar to the following:
IF
CALC_ERROR( )
= 'X'
 DO SOMETHING HERE
ENDIF
Let me explain how this works internally. The SAP system maintains a global variable g_flg_calc_error during the execution of macros in the planning book. The g_flg_calc_error variable will contain the value of f_calc_error that was set by the last macro function which executed. The ABAP coding of a planning book is something like this:
data: g_flg_calc_error type /SAPAPO/FLAG.
* SAP will pass g_flg_calc_error variable to all macro
* functions. When SAP calls a macro function, it does
* something like this.
call function '/SAPAPO/MACRO_FUNCTION_HERE'
 exporting
 plob_values = i_s_adv_plob_values
 sdp_book = g_c_advf_sdp_book
 sdp_view = g_c_advf_sdp_view
 tables
 cols_index = i_t_cols
 value_tab = l_t_value_tab
 changing
 f_calc_error = g_flg_calc_error
As you can see, the g_flg_calc_error variable
is passed in the "changing" part of the call. The macro function being called can then use the f_calc_error
variable to change the value of the global
g_flg_calc_error variable. In fact, the macro function being called can also check (by looking at the f_calc_error variable) if the last macro function reported an error. The CALC_ERROR macro function just checks the value of f_calc_error parameter (w/c in fact is the value of the g_flg_calc_error variable) and returns "true/X" if the f_calc_error was set to true by the last macro function.
Hope this helps in clearing things out

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Why can't I use the extra -$20/5GB- storage that I purchased?!!

I bought the EXTRA $20/5GB of storage, BUT when I tried to update my iPad Mini, it says that I need 1+GB to be able to download the update?! The new extra storage does show up in the place where the total storage is shown. In fact, it says that I still have 8.2GB of storage space remaining... ?! Could anyone please help me?!?

You can use the extra storage space. It will allow you to have larger backups (meaning more pictures in your camera roll, etc).
The space required to install the update is needed on your iPad. Not iCloud. There is no way to add storage ON the iPad.
You can get around the issue by installing the update using a computer with iTunes installed on it. The space won't be needed on the iPad to download, extract, and install the software update.
You can also contact AppleCare to ask for a refund, as the extra storage you purchased did not achieve the result you were looking for.
AppleCare US phone number: (800)-694-7466
Contact Apple for support and service
http://support.apple.com/kb/HE57

HT1338 I need to bulk upload to Auctiva (auction software) but Java was disabled on my computer. I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva?

I need to bulk upload images from iPhoto to Auctiva (auction software) that will then be posted to eBay; however Java was disabled on my computer some time ago due to "known issues." I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva? As it stands now, I have to upload photos individually which is super time consuming.

You can re-enable it for special purposes, opposite of disabling it...
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets

Is possible for me to use the wireless connection from my Macbook Pro

Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

Yes. Just use internet sharing on your MacBook Pro.

Using the extra content from FCP7 on FCPx?

Similar Messages

Maybe you are looking for