Using the fcanalyzer feature in the MDS modules

Hi all,
i'm trying to use the fcanalyzer command to observe one port on my switch as you can see below. Normally i should see all traffic on the port with the FC-ID 3b.00.00. But i can't see nothing.
Is something wrong with my command ?
fcanalyzer local brief display-filter ((mdshdr.vsan==0x01)&&((fc.d_id==\"3b.00.00\"\|\|fc.s_id==\"3b.00.00\"))) limit-captured-frames 0
Thanks Carsten

The fcanalyzer command only works to monitor traffic from the port to the internal addresses on the switch, such as the fabric controller or name server. It does not intercept traffic traveling from one external port to another. (Except in the obscure case of a limited number of Fabric commands when IVR is in use.)
When I use the fcanalyzer command, I just tell it to capture everything, regardless of source, destination, FCID, whatever. Unless you have a fairly unstable fabric, this will not produce an unreadable mess. (It also has the advantage that it will capture both sides of a FLOGI. Filtering by FCID will not.)
If you want to "sniff" all the traffic, you will need to use a SPAN port and a Cisco Port Analyzer Adapter (the cheap option), or if you need to monitor more bandwidth than that box can handle or work on a lower level, you will need a XGig analyzer from Finisar. (the not-so-cheap option)
Peter Mescher
IBM Systems Group, SAN Support

Similar Messages

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How to use the function module 'HR_ES_FEATURE_BACKFIELD'

Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

I want to use the Web module to publish to the a website... What kind of server do I need to be able to publish my website?

You don't need a server, you just need a web hosting package such as the ones from GoDaddy or many other hosts. You then send the web gallery directly from LR to your web space.
As you're asking such basic questions, it might be best if you read articles like this and see if a friend or colleague can get you started.

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

After I use the Develop module in LR4 I edit in PS-CS4, now the develop changes do not show in CS4.

After I use the Develop module in LR4 I edit in PS-CS4, now the develop module changes do not show in CS4.

You need to send the file over to CS4 as a PSD (with Lightroom Adjustments checked)
CS4 cannot interpret the newer processing version used by Lightroom 4

Can i use the Service Module?

Hello all,
can i use the service module w/ the ff. scenario?
items are manage by serial numbers., but we dont sell it, we purchase the item for internal use only. this are the ff. information that i want to track.
1.     track the history of the item everytime it has undergone for repair
a.     some cases the repair takes place within the company, meaning employees within the company take care on the labor but only parts will be purchase
b.     some cases the repair takes place in business partner, (PO Service in this case)
2.     track the parts that was replace
what will be my work around for this. please advice
best regards,
Fidel

Hi Fidel,
You would need the following is you wanted to use the Service Module to track internal serialized inventory/hardware:
1. Set up a customer record that would represent the internal use/company/department
2. Manually create the Customer Equipment Card (when receiving the equipment on GRPO or AP invoice, you would want to use a warehouse that represents internally-used equipment/assets)
Repairs: you could update the status of the CEC record when it's being repaired (or have a repair WH for when it's sent off-site).
Expenses: related expenses could be done by creating a Service Call linked to the CEC with details/purpose, etc. which would be tracked on the Expenses tab but the transactions don't include AP (PO's), the assumption being that any expenses would be charged back to the customer, which in this case would be internal.
If you want the expenses linked to the item/CEC then you could use Activities from Service Call and you can link the PO/AP invoice thru the Activity. You could have one S/C record that would be for tracking equipment repairs and leave it open for as long as you have the item - that would be the link between the Activities and the CEC/equipment record. Whenever repairs are to be record, you would only need to pull up the CEC record and drill-down to the S/C to create a new Activity record. This will also enable you to see how many repairs are being down - you could even breakdown the Activity on internal vs external (have it as a Type, on which you can then report on overall as well as by item).
It will depend on what info you want to capture and if you need anything for reporting that would be that detailed (i.e. down to a serialized item) as to what process & setup you want to use. Try out the above and hopefully something will work out.
HTH,
Heather

Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition. I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail. Any input is appreciated.

Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW? Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver. You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go. Hope this helps.
Jason N

How to use the Function Module RH_READ_INFTY_1001...

Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
       from hrp1001
       into gv_sobid
       where subty eq 'B207'
       and sclas eq 'BP'
       and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
       from hrp1001
       into gv_sobid
       where subty eq 'B209'
       and   otype eq 'CP'
       and   objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
       from pa0105
       into gv_usrid
       where pernr eq gv_sobid
       and   subty eq '999'.
Reply ASAP....
Answers will be Rewarded...

objects-plvar = l_plvar.
              objects-otype = 'S '.
              objects-sobid = l_positions-objid.
              APPEND objects.
              CLEAR i1001_itab. REFRESH i1001_itab.
              CALL FUNCTION 'RH_READ_INFTY_1001'
                   EXPORTING
*                       AUTHORITY       = 'DISP'
*                       WITH_STRU_AUTH = 'X'
                        istat           = '1'
*                       EXTEND          = 'X'
                        subty           = 'A008'
                        begda           = l_keyda
                        endda           = l_keyda
*                       CONDITION       = '00000'
*                       SORT            = 'X'
*                       WITH_EV         = ' '
*                       ADATA           = 'X'
                   TABLES
                        i1001           = i1001_itab
                        objects         = objects
                   EXCEPTIONS
                        nothing_found   = 1
                        wrong_condition = 2
                        OTHERS          = 3.
              IF sy-subrc <> 0.
                CLEAR i1001_itab. REFRESH i1001_itab.
                CLEAR mngr_nr.
              ELSE.
                READ TABLE i1001_itab WITH KEY sclas = 'P'.
                IF sy-subrc = 0.
                  mngr_nr = i1001_itab-sobid.
                ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105

How to use the function module CONVERSION_FACTOR_GET?

Hi Experts,
I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
Please help.
Rewards for sure!
Thanks in advance.
Aksh

Hi
If it is Unit Conversion better use the following Fun modules
UNIT_CONVERSION_SIMPLE
MD_CONVERT_MATERIAL_UNIT
goto SE37 first and execute them by entering some value and then use it in the code after confirming it
Regards
Anji

How to use the function module ....

hi
how to use the function module ssf_function_module_name in smartforms

Hi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu

Regarding how to use the function module *control_form* in scripts

HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.

hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
      kunnr LIKE kna1-kunnr,
      name1 LIKE kna1-name1,
      ort01 LIKE kna1-ort01,
      land1 LIKE kna1-land1,
      END OF it_kna1.
DATA:records TYPE i,
     window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
    form     = 'ZSCRIPT4'
    language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ELE1'
      function = 'SET'
      type     = 'BODY'
      window   = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
    window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
   EXPORTING
        command         = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED        = 1
UNSTARTED       = 2
OTHERS          = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji

How to use the function module ADDRESS_INTO_PRINTFORM?

Hi there,
i need to use the function module ADDRESS_INTO_PRINTFORM. While doing so, I found out that the output parameter ADDRESS_PRINTFORM_TABLE has the District after the City, which is not at all acceptable. I am using the following import parameters only.
ADDRESS_TYPE
ADDRESS_NUMBER
SENDER_COUNTRY
NUMBER_OF_LINES
IV_NATION
Kindly help me to find out what's missing to have the district before the city in the output.

Hi
I think, It is because of wrong data maintained in ADRC table.
Check ADRC table. CITY2 is district and CITY1 is city.
In the output of ADDRESS, CITY2(District) has to come first.

How to use the function module /IRM/IPBB_AGREEMENT_CREATE.

Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.

FORM create_agreement TABLES pt_agreement
                                       CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
        lc_cbasp TYPE /irm/s_ipcbasp,
      lt_cbapr TYPE /irm/t_ipcbapr,         "Partners
      lc_cbapr TYPE /irm/s_ipcbapr,
      lt_cbadt TYPE /irm/t_ipcbadt,        "Dates
      lc_cbadt TYPE /irm/s_ipcbadt,
      lt_cbafs TYPE /irm/t_ipcbafs,
      lc_cbafs TYPE /irm/s_ipcbafs,
      lt_cbacn TYPE /irm/t_ipcbacn,
      lc_cbacn TYPE /irm/s_ipcbacn,
      lt_cbacl TYPE /irm/t_ipcbacl,
      lc_cbacl TYPE /irm/s_ipcbacl,
      lt_cbtpv TYPE /irm/t_ipagtpv,
      lc_cbtpv TYPE /irm/s_ipagtpv,
      lt_texts TYPE text_lh,
      lc_texts TYPE itclh,
      lt_cbasd TYPE /irm/t_ipcbasd,
      lc_cbasd TYPE /irm/s_ipcbasd,
      lc_agreement    TYPE /irm/s_ipcbasp_doc,
      lc_e_log_number TYPE balognr,
      lt_messages     TYPE /irm/t_gprolog.
DATA: lt_vake      TYPE cond_vakevb_t,
        lc_vake      TYPE LINE OF cond_vakevb_t,
        lt_konh      TYPE /irm/t_gkonh,
        lc_konh      TYPE LINE OF /irm/t_gkonh,
        lt_konp      TYPE /irm/t_gkonp,
        lc_konp      TYPE LINE OF /irm/t_gkonp,
        lt_konw      TYPE /irm/t_gkonwu,
        lc_konw      TYPE LINE OF /irm/t_gkonwu,
        lt_konm      TYPE /irm/t_gkonmu,
        lc_konm      TYPE LINE OF /irm/t_gkonmu,
        lt_komg      TYPE /irm/t_gkomg_index,
        lc_komg      TYPE LINE OF /irm/t_gkomg_index,
        lt_user_data TYPE /irm/t_gpraxfu_index,
        lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
         hd(2) TYPE c VALUE '$$',
         inc_num(8) TYPE c,
        END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
        WHERE vkorg   = lc_rule-vkorg
        AND    vtweg   = '10'
        AND    spart   = '10'
        AND    boart   = 'ZPS1'
        AND    botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
   lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
    MOVE sy-tabix TO lc_str_knumh-inc_num.
    CONDENSE lc_str_knumh-inc_num NO-GAPS.
    WHILE lc_str_knumh-inc_num+7(1) = ' '.
      CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
      CONDENSE lc_str_knumh-inc_num NO-GAPS.
    ENDWHILE.
    CONCATENATE '$$' lc_knumh INTO lc_knumh.
    MOVE lc_str_knumh TO lc_knumh.
   MOVE c_strt_knumh TO lc_knumh.
    CLEAR: lc_konh, lc_konp, lc_komg.
    MOVE: lc_rule-vkorg    TO lc_komg-komg-vkorg,
          '10'             TO lc_komg-komg-vtweg,
          '10'             TO lc_komg-komg-spart,
          p_waers          TO lc_komg-komg-waerk,
          '1300'           TO lc_komg-komg-bukrs,
          lc_rule-lifnr    TO lc_komg-komg-lifnr,
          lc_knumh         TO lc_komg-knumh,
          lc_knumh         TO lc_konh-knumh,
          lc_knumh         TO lc_konp-knumh,
          lc_rule-datab    TO lc_konh-datab,
          lc_rule-datbi    TO lc_konh-datbi.
    CASE lc_rule-tablnam.
      WHEN 'A701'.                   "Every Agreement will have a A701 rule -
        "Therefore we acn setup the header using A701
        MOVE: 'New       ' TO lc_kona-knuma,
              lc_rule-vkorg TO lc_kona-vkorg,
              '10'          TO lc_kona-vtweg,
              '10'          TO lc_kona-spart,
              'ZPS1'        TO lc_kona-boart,
              'C'           TO lc_kona-abtyp,
              'V'           TO lc_kona-kappl,
              p_waers       TO lc_kona-waers,
              lc_rule-knuma_ag TO lc_kona-abrex,
              'ZPS2'        TO lc_kona-kobog,
              lc_rule-datab TO lc_kona-datab,
              lc_rule-datbi TO lc_kona-datbi,
              lc_rule-sap_agkey TO lc_kona-botext,
              '1300'        TO lc_kona-bukrs,
              'I'           TO lc_kona-updkz.
        MOVE: 'New       ' TO lc_cbasp-knuma_ag,
              'ZPS1'        TO lc_cbasp-boart_ag,
              p_waers       TO lc_cbasp-waers,
              'A'           TO lc_cbasp-setl_mth,
              'B'           TO lc_cbasp-setl_typ,
              'A2'          TO lc_cbasp-ident,
              'E'           TO lc_cbasp-setlm,
              'ZPDA'        TO lc_cbasp-pargr,
              'X'           TO lc_cbasp-npric,
              'LF'          TO lc_cbasp-stprl,
              lc_rule-lifnr TO lc_cbasp-stpar,
              lc_rule-contract_rev TO lc_cbasp-rvnum,
              'I'           TO lc_cbasp-updkz.
        CONCATENATE: blank_agree_key
               lc_rule-lifnr        INTO lc_konh-vakey.
        MOVE: lc_rule-lifnr TO lc_konp-lifnr.
      WHEN 'A703'.
        CONCATENATE: blank_agree_key
                     lc_rule-kunnr      INTO lc_konh-vakey.
        MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
      WHEN 'A709'.
        CONCATENATE: blank_agree_key
        lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
               lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
        CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
               lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
      WHEN 'A710'.
        CONCATENATE: blank_agree_key
            lc_rule-matkl   INTO lc_konh-vakey.
        MOVE lc_rule-matkl TO lc_komg-komg-matkl.
      WHEN 'A711'.
        CONCATENATE: blank_agree_key
             lc_rule-matnr   INTO lc_konh-vakey.
        MOVE lc_rule-matnr TO lc_komg-komg-matnr.
        IF lc_rule-kschl = 'ZPPL'.
          MOVE: 'C'              TO lc_konp-krech,
                'CAD'              TO lc_konp-konwa.
          lc_konp-kbetr = lc_rule-net_po_price * 1.
        ENDIF.
      WHEN 'A717'.
      WHEN 'A718'.
        CONCATENATE: blank_agree_key
             lc_rule-zzextwg INTO lc_konh-vakey.
        MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
     WHEN 'A719'.
       CONCATENATE: blank_agree_key
            lc_rule-werks INTO lc_konh-vakey.
       MOVE lc_rule-werks TO lc_komg-komg-werks.
     WHEN 'A721'.
       CONCATENATE: blank_agree_key
             lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
       MOVE: lc_rule-kunnr TO lc_konp-kunnr,
             lc_rule-kunnr TO lc_komg-komg-kunnr.
      WHEN 'A722'.
        CONCATENATE: blank_agree_key
                     lc_rule-vkbur INTO lc_konh-vakey.
        MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
      WHEN 'A724'.
        CONCATENATE: blank_agree_key
                      lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
        MOVE: lc_rule-kunnr TO lc_konp-kunnr,
              lc_rule-kunnr TO lc_komg-komg-kunnr,
              lc_rule-vkbur TO lc_komg-komg-vkbur.
    ENDCASE.
    MOVE: 'A'                  TO lc_konh-kvewe,
          lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
          lc_rule-kappl        TO lc_konh-kappl,
          lc_rule-kschl        TO lc_konh-kschl.
    REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
    APPEND lc_konh TO lt_konh.
    CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
    MOVE: lc_rule-kappl        TO lc_konp-kappl,
          lc_rule-kschl        TO lc_konp-kschl,
          'G'                  TO lc_konp-krech.
    IF lc_rule-kschl+3(1) = '%'.
      MOVE: 'A'              TO lc_konp-krech,
            '%'              TO lc_konp-konwa.
      lc_konp-kbetr = lc_rule-rebate_perc * 1.
    ENDIF.
    APPEND lc_konp TO lt_konp. CLEAR lc_konp.
    APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
    CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
      EXPORTING
      I_MESSAGES_DISPLAY        = ' '
      I_SAVE_MESSAGES           = ' '
      I_COMMIT_WORK             = 'X'
      I_CALL_FROM_WS            = ' '
        is_kona                   = lc_kona
        is_cbasp                  = lc_cbasp
        it_cbapr                  = lt_cbapr
        it_cbadt                  = lt_cbadt
        it_cbafs                  = lt_cbafs
        it_cbacn                  = lt_cbacn
        it_cbacl                  = lt_cbacl
        it_cbtpv                  = lt_cbtpv
        it_texts                  = lt_texts
        it_cbasd                  = lt_cbasd
      IMPORTING
        es_agreement              = lc_agreement
        e_log_number              = lc_e_log_number
      TABLES
        t_messages                = lt_messages
     CHANGING
      CT_VAKE                   = lt_vake
      ct_konh                   = lt_konh
      ct_konp                   = lt_konp
      CT_KONW                   = lt_konw
      CT_KONM                   = lt_konm
       ct_komg                   = lt_komg
      CT_USER_DATA              = lt_usr_data
      EXCEPTIONS
        no_documents_to_process   = 1
        no_authorization          = 2
        creation_failed           = 3
        new_pricing_not_maitained = 4
        OTHERS                    = 5.
    IF sy-subrc <> 0.
Implement suitable error handling here
    ELSE.
      MOVE: lc_agreement-knuma_ag TO po_agreement,
            lc_agreement-knuma_ag TO lc_kona-knuma.
    ENDIF.
    APPEND LINES OF lt_messages TO gt_messages.
ELSE.
    MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
    MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
   move '&'           to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
   MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
    move '&'           to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
    EXPORTING
    I_MESSAGES_DISPLAY      = ' '
    I_SAVE_MESSAGES         = ' '
    I_COMMIT_WORK           = 'X'
    I_INIT_DATA             = 'X'
      is_kona                 = lc_kona
      is_cbasp                = lc_cbasp
     it_cbapr                = lt_cbapr
     it_cbadt                = lt_cbadt
     it_cbafs                = lt_cbafs
     it_cbacl                = lt_cbacl
     it_cbacn                = lt_cbacn
    IT_FIELDS               =
     it_texts                = lt_texts
   IMPORTING
     e_log_number            = lc_e_log_number
     TABLES
       t_messages              = lt_messages
    CHANGING
      cs_agreement            = lc_agreement
    CT_VAKE                 = lt_vake
      ct_konh                 = lt_konh
      ct_konp                 = lt_konp
    CT_KONW                 = lt_konw
    CT_KONM                 = lt_konm
      ct_komg                 = lt_komg
    CT_USER_DATA            = lt_usr_data
    EXCEPTIONS
      no_documents_to_process = 1
      no_authorization        = 2
      change_failed           = 3
      agreement_locked        = 4
      OTHERS                  = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM.                    " CREATE_AGREEMENT

How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'

Dear Experts,
         Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.

Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
          "to be added as main partner or in place of Interaction Agent
          wa_partner_new-ref_guid = w_guid_ref.
          wa_partner_new-ref_handle = '0000000000'.
          wa_partner_new-ref_kind = 'A'.
          wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
          wa_partner_new-ref_partner_handle = '0000'.
          wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
          wa_partner_new-ref_partner_no = wa_partner-partner_no.
          wa_partner_new-ref_no_type = wa_partner-ref_no_type.
          wa_partner_new-ref_display_type = wa_partner-ref_display_type.
          wa_partner_new-display_type = 'BP'.
          wa_partner_new-no_type = 'BP'.
          wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
          wa_partner_new-partner_no = w_partner_no.
          wa_partner_new-mainpartner = 'X'.
          INSERT wa_partner_new INTO TABLE it_partner_new.
          wa_partner_newx-display_type = 'X'.
          wa_partner_newx-no_type = 'X'.
          wa_partner_newx-partner_fct = 'X'.
          wa_partner_newx-partner_no = 'X'.
          wa_partner_newx-mainpartner = 'X'.
          INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
    "maintain all changes to be done
    CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
      TABLES
        partner = it_partner_new
        partnerx = it_partner_newx.
    CLEAR : wa_guid1.
    REFRESH : it_guid1.
    wa_guid1-guid = w_guid_ref.
    APPEND wa_guid1 TO it_guid1.
    "save the changes
    CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
      TABLES
        objects_to_save = it_guid1.
    "commit the transaction
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha

Using the fcanalyzer feature in the MDS modules

Similar Messages

Maybe you are looking for