Using the File transactions

Hi,
While creating a logical file, and uploading it in the Development system using the transaction 'FILE', I am getting a pop up to create a request, which i create.
Now the question is, if i need to create the logical file and upload the files to the application server in quality and production, do I need to create new entries in Quality and production, or do i need to create it in Development, giving the quality system, and production system path in seperate entries and transport it in two seperate entires in Quality and production respectively.
I will certainly avoid points for the solution.
Thanks and Regards,
Thiru

Hello,
normally you create these entries in development system and transport them to quality and production.
Remember: most of these entries are client independent customizing.
The whole sense of these logical defintions are to have an abstraction between the filenames in ABAP-programs and the real filenames on the file-system.
For example: we have interface-files that reside in
development system (T44) on a path named /usr/sap/T44/data/in/fi, in quality system (A44) on /usr/sap/A44/data/in/fi
So we defined a logical path that ZFI_FI_IN with points to the physical path /usr/sap/<SYSID>/data/in/fi/<FILENAME>. That fits for all systems, because <SYSID> is a parameter
which is translated by the function module FILE_GET_NAME.
There are some more parameters that you also may use, like <CLIENT> or  <DATE> .
Regards Wolfgang

Similar Messages

  • When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

    When I quit Photoshop CS6, the following message appears:
    " Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
    If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
    "Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
    I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
    I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
    I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
    Can you help?
    Thanks,
    cjpnm

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Photoshop won't start: Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file.

    Adobe Photoshop CS6 Extended
    "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file."
    I've tried finding and checking and fixing permissions but no success.
    This happened from one day to the next. I think it has to do with the sn attached to the disk rather then the motherboard. I have the suite co-installed with Symphony 5.05. I've tried reinstalling.
    What's to b done? The rest of the Creative Suite 6 (AE, AI etc.) works fine.
    Anyone...?
    Loui

    Have you tried restoring the Preferences yet?

  • How to publish to an FTB server in iWeb 2 using the File ➙ Publish to Folder option??

    I was just given the following advice regarding publishing to an FTP other than MobileMe. 
    Web 08 does not have that feature (drop down menu to publish from "site" icon).  You will need to upgrade to iWeb 3 in iLife 11 in order to get that feature.  You can get iLife 11 at the online Apple Store while supplies last since iWeb (and iDVD) have been discontinued by Apple
    To pubish to an FTB server in iWeb 2 use the File ➙ Publish to Folder menu option and then use a 3rd party FTP client like Cyberduck to upload the site files.
    Follon-on question, can anyone provide more details on how to do exactly what was suggested?  I toyed with it and can only get it to publish to a folder on my desktop, but not to an external FTP.  (I have already purchased a web-host package, just need to publish to it!)

    Okay.  When you publish your site from iWeb to a local folder what you will get is one site folder - this site folder will have the same name as you gave your site in iWeb and one separate index.html file.
    Your site folder contains an index.html file as well as the separate index.html file.  You NEED both.
    What you need to do is firstly using Cyberduck or whatever, upload your site folder to your host into whatever folder you need to upload to on the server - could be 'public_html', 'htdocs' or whatever - this is your root folder.
    You then need to upload your separate index.html file to your server too, but this index file needs to sit outside your site folder because it needs to point in towards the index.html file that is in your site folder - this is the first page of your site.
    You don't delete or duplicate any index files - iWeb produces the two index files that you need when you publish to a local folder - one index file in the site folder itself and one separate index file that sits outside the site folder and points into the first page of your site. 
    Also, remember to call the first page of your site something like Home or Welcome, but DO NOT name it index.
    By the looks of things here you have not uploaded your index files correctly.
    What I would suggest that you do is start over - so open Cyberduck and connect to your server and go and delete your site folder and your other index file if it is still there.
    Go back to iWeb and publish to a local folder again and notice that you have both your site folder and separate index.html file.
    Now go and open Cyberduck again and connect to your server and note where you need to upload your files to.
    Now go and upload your Site Folder to your server and once this has finished go back and upload your separate index.html file, but this needs to sit outside your site folder.  If you do this, then your site should display okay - as long as your other index file is pointing into to the first page of your site it should display correctly.

  • Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

    I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

  • HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Hi,  80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Select the desired location in preferences, then consolidate the media files to it.
    iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed.  It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

  • Cannot process a Fixed Field Length file using the File Adapter (Sender)

    Hi -
    I have checked throughout these posts and blogs but I still have not been able to find a solution to my issue.  When using the File Adapter (Sender) I get a Conversion initialization failed with "xml.keyfieldName", no value found.  Why would I require a key field when I am using fixed field lenghts?  The file is comprised of 2 structures - 1 header and multiple details (see below).  There are no key fields in the flat file that I would be able to use.  Any suggestions?
    011000390      Customer Americas        20080605164317 000000000000000800000008000000000016000000                              
    12345678          100500       100500       Supplier 1                         0000000000030000002008040400                    
    12345678          100501       100501       Supplier 2                         0000000000052000002008042100 
    The File Adapter is configured as follows:
    Document Name = Rfchke00
    Document Namespace = 'my namespace'
    Recordset Name = Rfchke00
    Recordset Structure = Dtachkh,1,Dtachkp,*
    Recordset Sequence = Ascending
    Recordsets per Message = 1
    Key Field Type = String (Case-Sensitive)
    Dtachkh.fieldFixedLengths = 15,25,8,6,1,8,8,8,15,3,31
    Dtachkh.fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11
    Dtachkh.processFieldNames = fromConfiguration
    Dtachkp,fieldFixedLengths = 18,13,13,35,15,3,8,2,21
    Dtachkp,fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9
    Dtachkp,processFieldNames = fromConfiguration
    Thanks,
    Dave

    Hi,
    you can use the module from which u can convert your structure to
    H011000390 Customer Americas 20080605164317 000000000000000800000008000000000016000000
    D12345678 100500 100500 Supplier 1 0000000000030000002008040400
    D12345678 100501 100501 Supplier 2 0000000000052000002008042100
    Please note the extra H,D in the struture added by the module.
    You can then use them as your key fieldValues.. The module should be deployed in Visual Admin and then can be used in the Module tab of your adapter CC
    While writing the content conversion after that please dont forget about the added new characters
    Please note also that i can find that the word supplier kept repeating in all the Dtachkp records
    Please use that
    Also if you feel that the field is of 13 characters and that would cause a problem dont worry... create a dummy field eg split tht 13 to two fields and use the common one as key field Value and identifier... as i see in ure case its like 500 Supplier , 502 Supplier . u can split the first 4 char and the remaing 9 char are key field value.
    try this out
    Rgds
    Aditya

  • Problem using the File Dialog Box in a Client/Server application

    I am developping a client-server application using Labview 5.1 . The application on the server acquires data from some instruments and saves it on file, while the application on the clients displayes such acquired data. For doing this I call some routines on the server via the "Open Application vi" (remote connection). All goes well except when I open on the server the "File Dialog Box vi" : in this case the application on the clients is blocked (is blocked the execution of the called vi on the server). Only when
    the File Dialog Box on the server is closed, the execution of the called vi on the server starts again.
    I need to use the File Dialog Box on the server, but I don' t want to stop at the same time
    the clients !!
    I need help for resolving such problem.
    Many thanks in advance !!!

    Hi!
    waldemar.hersacher wrote:
    "It seems that the VIs called by the clients are running in the user interface thread.
    A call to the file dialog box will call a modal system dialog. So LV can't go on executing VIs in the user interface thread."
    Are you sure? I think, that File Dialog, called by LabVIEW File Dialog from Advanced File Functions Palette doesn't blocking any cycles in subVI, which running in UI Thread. Look in my old example (that was prepared for other topic, but may be good for this topic too).
    2 linus:
    I think, you must a little bit reorganize you application for to do this. You must put your File Dialog into separated cycle. This cycle, of course, will be blocked when File Dialog appear on the screen. But other cy
    cle, which responsible for visualization will run continuosly at the same time...
    Attachments:
    no_block_with_file_open_dialog.zip ‏42 KB

  • Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

    I have this massage every time close ps cc
    Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Using the file protocol to read a URL from a DataSocket Link (DSL) file

    Hey people,
    The text of the message subject is almost directly lifted from the
    LabVIEW help file. I'm currently a DataSocket server for communication
    between a laptop and a Compact FieldPoint unit. My application is
    currently functioning, but I'm searching for a way to easily change the
    IP of the server without having to recompile the VI into a startup.exe
    file.
    The help file says it is possible to create a file (.dsl extension)
    which contains the URL of the server, with the following format:-
    [InternetShortcut]
    URL=dstp://servername.com/tag
    I have created such a file, but the help file refers to reading the URL
    from the DSL file directly, which I'm not sure how to do. The examples
    use hard-coded strings as their reference URLs, so no help there, and
    as far as I can see the question has not been raised before on these
    boards.
    I am aware that I could probably use the File Open vis and manually
    read the information contained within the file, but then it wouldn't
    make sense to rename it to .dsl or to have any other text other than
    the URL contained within.
    Thanks for your replies.

    Hey Lost And Found,
    There is actually a great example on using .dsl files with DataSocket.  You can append "file:" to the beginning of the path of your .dsl file, and wire it directly into the "connection in" pin of the DS Read.  Check out the example here: http://digital.ni.com/public.nsf/websearch/FCC19AF27EFED9A5862569A500709C58?OpenDocument.  I think that it will provide everything you need and if not, just ask.
    Hope this helps!
    Megan B.
    National Instruments

  • Security issues when using the file adapter

    I want to use the file adapter, and in the documentation it states that you can use "directories" and "ftp".
    I want to transfer a file secure and both of these options are not really secure.
    Directory reading is not really secure when you read files from a windows share (SMB protocol).
    Is it possible to make a share more secure in a windows environment?
    In an ftp session everybody can steal the password. Is there a possibility to use "sftp"? Or will this be available?

    Currently we dont have, but we will have it soon.

  • How to start a BPEL Process using the File Adapter

    Hi
    I would like to automatically start a BPEL Process when I store a file in a specific directory. Can this be done using the File Adapter?.
    Regards,
    Néstor Boscán

    Yes, there are samples of how to do this in the BPEL samples directory.

  • How do I set the Home Page for a newly open tab using the File Tab Menu??

    When I open a new tab, is there a way to set the home page the new tab will use when it is opened, or will new tabs always be opened as blank pages?

    I have new windows opening when I click on a link. Or when I click on the FF-Icon. New windows are the default setting.
    When a new window opens, I get a Google home page and can instantly type in a search phrase.
    With the above in mind, sometimes I want to keep search classes in the same window. In a sense I'm using the Window with no tabs, to generate a tab by using the File Tab option.
    When a Tab is selected where new windows will launch a new page, and not a new tab, the process of forcing a new tab onto the window will produce a tab page that is Blank, and the new tab label description displayed in the tab area shows the words "New Tab". That tab's URL address bar is blank. Zip - nothing displayed.
    When a blank page tab appears, I click on the HOME button you helped me remodel, and the "New Tab" description in the tab label area changes from "New Tab" to "Google".
    My question was to ask, if there was a way I could do something to make FF4 do that Home page assignment on its own. In the early FF days I found you could sometimes go into the bowels of FF, find some form of INI or SETTINGS type file, look for a Keyword reference that would tell FF to do something different, and Viola, emotional issue resolved. In this case, I'm trying to "Gild the Lilly" by asking if you, or someone else might have a rabbit they can pull out of their hat, just like you did when you helped me move my Home button, and have that rabbit show me how to do something that default FF-Options section doesn't support.
    Did I do a better job of explaining the issue this time?
    Thanks again for the response.
    When I

  • Why does Firefox 4 not let you save a pdf document using the "File" tab. Internet Explorer * give you an option..."Save as....". Can I get same function with FF4?

    Can't save a pdf file using the 'File' tab in FF4.

    Clicking "Save Page As..." in the Firefox menu should work fine. However, if the server you are downloading from is set up incorrectly, Firefox might recommend a filename which does not have the ".pdf" extension (e.g. "get_file.php"). In this case type ".pdf" at the end of the file name.

  • PI needs to obtain a zip file via FTP using the File adapter

    I have a scenario where PI needs to obtain a zip file via FTP using the File adapter, this zip file contains a number of txt files that I need to process, and the content of one of them send it to an ECC, now I'm using the PayloadZipBean Module in the Sender FIle Adapter, and I have two things if I use the Message Protocol as File, I get a Payload for each txt file in the zip file, but this payload has no structure, and if I use the File Content Conversion I get an XML strcuture with only one field and a strange string in it, and somewhere in this string the names of the files I assume all the content of the zip file, can anyone help on how could I achieve what I need that is to pull the zip file via SAP PI, then unzip it, and with the content of one of the txt files send it to an ECC via ABAP Proxy, thanks in advance for your answers.
    Regards,
    Raul Alvarado

    Hello Raul,
    you can do it in futher way ...
    pickup zip file and simply extract and dump it in another temp folder (can use scripts on OS level).
    @ then Use another sender communication channel to pickup all these text file .
    for further clarification you can use these links also. -
    Process txt files in zip file
    Accessing File using FTP from Java Mapping
    File Sender Adapter with FTP protocol
    BR
    Raj

Maybe you are looking for