Using the IPAD mail Icon I attempted to download a PDF attachment.

Using my IPAD2 'email Icon' as usual I attempted to download a PDF attachment [first two worked OK]. A blank greyish mottled screen resulted - and I can't get back to 'emails'. Trying the Icon always brings the blank screen - What must I do please?
Many thanks
Brian Payne

You've got the iBooks app installed on your iPad ? If you do and in the Mail app the PDF attachment is open full screen, if you tap the attachment you should get an icon top right of a square with an arrow coming out of it, tap that and you should see an 'open in iBooks' option. If the PDF is shown within the email (i.e. it's not full screen) then press and hold on the attachment and after a second or two you should get a popup appear.
You can also sync PDFs to the iBooks app via your computer's iTunes. You should be able to add them to your iTunes via File > Add To Library (they will go into the Books part of your iTunes library), and you can then sync them to the iPad by connecting and selecting the iPad on the left-hand side of your computer's iTunes, and then use the Books tab on the right-hand side to select and sync the PDFs to the iBooks app.

Similar Messages

  • I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

    I cannot read or write I have been using the iPad With the accessibility icon  Is there a video to help teach me To learn how to use this accessibility more efficiently

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Can you use IMAP with the ipads mail feature?

    Can you use IMAP with the ipads mail feature?

    Kappy,
    Yes, our domain and email accounts are on a server that does accept IMAP. Also, our mac mini and imacs are all set up for IMAP. Buying an ipad will enable me to work from home during this winter.
    Another ?: do you know if you can use text edit with the iPads mail feature? Reason being we have about 100 generic emails that all we have to do is change a few fields before sending out. Can this be integrated in without having to recreate all these messages?
    -TIM

  • If the MS Exchange ActiveSync port had been changed, how to set up the iPad Mail account?

    Hi all,
    The default MS Exchange ActiveSync port is 443 but due to security reason it had been changed.
    Under this situation how to set up the iPad Mail account?
    I could not find out the port modification area in iPad account settings.
    Or any other apps are suitable for multiple accounts within 1 domain?
    That means i can use this app for more than 1 email accounts within 1 exchange server.
    I had tried eMailGanizer. It could allow you to modify the port number but if you need to send email you still need to set up the account in Apple mail first.
    I tried Outlook Mail but could not allow multiple accounts within 1 domain.
    I tried Mail Access 2010 but it could not display the emails in the server.
    Please help!
    Thanks a lot!

    Next test
      using Outlook.com I just deleted an email
        by clicking the Trash icon that appears
          when hovering near an email subject
            in the list of emails.
    Then I clicked the Send/Receive button
      in Apple Mail.
    The email disappeared from the Inbox listing
      in Apple Mail.
    The email is listed in the Deleted Folder
      within Apple Mail.
    The email also appears in Outlook.com
      within the Deleted Folder
    I'm not seeing an equivalent operation in Outlook.com
      to perform the Erase Deleted items
        such as Apple Mail provides..
    There was momentarily a "Sweep to Delete"
      animation that appeared and is now gone..
    Pomme is correct.. by selecting "Erase Deleted Items"
      within Apple Mail does not clear the Deleted Folder
        when the email was first deleted using Outlook.com
    Now I'm seeing further synch problems in that deleting in Outlook.com
      The emails disappear from Apple Mail Inbox,
        but do not appear within the Apple Mail Deleted Folder..
          (as it did with the first message I deleted using Outlook.com)
    Yes.. there is some synchronizing problems..
    I just exited Apple Mail, and restarted it, synched
      and now all messages deleted from Outlook.com
        appear within Apple Mail Deleted Folder..
    For Outlook.com the equivalent operation to Erase Deleted Items
      Is to click the Trash icon next to the emails
        within the Deleted Folder..
    Moral of the story is for Apple Mail
      periodically select Erase Deleted Items
      and for Outlook.com
        periodically look in the Deleted Folder
          and delete those emails (that you already deleted)
            a second time..

  • How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.

    How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.
    == This happened ==
    Not sure how often
    == always

    Thank you, "the-edmeister" -- You render a great service, one that lifts my spirits.
    Your answer also taught me to be a little more persistent, as I had started looking at Preferences, and just didn't notice the icons (including Applications) at the top of that window that would have led me to my answer.
    Dave

  • How can I attach an image without the image is in the email body? (using the new mail the Lion)

    How can I attach an image without the image is in the email body? (using the new mail the Lion)
    I want in attachment, not in the body mail.

    I think your only solution is to zip the image files first and then attach them.
    Read this from a site I found:
    Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
    On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
    Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
    If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

  • Is there a way to set the iPad Mail app to only get email manually, not automatically when the app is opened?

    I usually don't use my iPad Mail app to check my email, but sometimes I go into the Mail app just to send a test email or check an attachment in the Sent folder or some such, and every time I enter the app, Mail checks for new email. Which means it ends up downloading five hundred emails or so if I haven't been to the app in a while. Annoying! I haven't been able to find a setting that will stop Mail from checking for new Mail when I go into the app; is there such a setting?

    You can turn mail off in the settings but then you can't use it for anything, including the "test" that you want to perform.
    Settings>Mail, Contacts, Calendars>Account Name>Mail>Off. That totally turns off the mail account.
    As long as mail is turned on and you launch the app, it will look for an download new mail.

  • I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far, just before cloning may start and receive an "error 254" and can go no further.  Any idea what this error is?

    I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far throughj the process where its about to start cloing when I get a message " error 254".  Any idea what that means and how do I get around this issue so I can use my new hard drive?  Thanks for your input.
    Vince

    Connect the HDD to your MBP.  Open Disk Utility>Erase and drag the HDD icon inrt the Name field.  The format should be Mac OS Extended (Journaled).  Click on the Erase button.
    Then try the clone process again.  You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
    Ciao.

  • Since the last upgrade, aol email does not download unless I touch the e-mail icon

    Since upgrading to 7.1.1 my email does not download unless I touch the e-mail icon.  This affects both the I-pad and the I-phone 5s

    I did the update on my iPad, but not on my phone and my AOL email hasn't been pushing to my phone or my iPad for the last couple of days. This started happening prior to me upgrading.  I hoped that it would at least help my iPad, but it hasn't.  Everything was fine until late Thurs or early Friday....May 1-May 2.  I called AOL yesterday, and they said that they would have upper level techs see if they can find out if it's a server problem, etc or anything else on their end, and get back to me.  Probably won't hear from them until Monday, at the earliest.  It happened very suddenly with my "push" nolonger working for me on both devices.

  • Hello everyone !  As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad it says that it's not activated, and I can't activate it using the iPad , When I plug it on my win so I can restore it using iTunes , I got to er

    Hello everyone !
    As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
    I hope you can help me.
    Thanks,

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • How do i Transfer photos from my ipad to SD Card using the Ipad photo kit

    How do i Transfer photos from my ipad to SD Card using the Ipad photo kit

    I don't think you can directly transfer pictures from your iPad to an SD card using the photo kit.  If you have Windows PC  (with USB port), connect it to you iPad using the Apple Dock Connector to USB Cable. After connecting, open Windows Explorer on your PC and you'll notice that one of the icons is your iPad (as an external drive).  Click on the iPad icon, then Internal Storage, then DCIM. Once you open the DCIM folder, youll see a bunch of folders in it (just like the one below) - that's were your pictures are stored. You can copy and paste these folders (or the files inside them) to you PC or if your PC has an SD Card slot (with card in it), you can copy them there as well.
                                                                                 Apple Dock Connector to USB Cable

  • How do you install Thunderbird on a new Apple iPad 2?  When attempting to download, I get a message that Safari cannot open the file.

    Can anyone provide instructions regarding downloading Thunderbird on an Apple iPad 2?   I attempted to download on the iPad through Google and when the download attempted to start it gave a message that Safari could not download this file.

    You can only install apps from the iTunes App Store.   That's why Safari won't download it.   Even if it did download it, you couldn't install it as iOS wouldn't recognize it as an iOS app (which Thunderbird isn't).

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • How do I use the „Apple Mail To Do" Folder on multiple Macs?

    Hi,
    I'm using the Apple Mail To Do Folder respectively the "To Do" function in mail on my iMac and my MacBook. I will find To Dos created on the MacBook in the "Apple Mail To Do" Folder on my iMac, but the iMac doesn't show these To Dos in the associated mails. Same happens for To Dos created on the iMac when I try to use them with the MacBook. Any hint?
    Thanks.

    Turning the mail account off does not really solve this problem. All the snooper has to do if the mail account is turned off is to turn it back on, read messages and then turn it off again.
    If the Apple mail works like other mail systems, you can mark read messages as unread. Then you really won't have any way of knowing that your messages were read already.
    The simple solution is (wondering why Apple has not implemented it) is to remove the password in the Mail settings so that each time the Mail is opened, it will ask for a username and password.

Maybe you are looking for

  • Only Essbase read access for a Planning App

    A user needs access only to read data values from essbase for a planning application. Similar to "View User" in Planning roles except doesn't need access to Planning. How can this be achieved? Thanks

  • Regarding SAP Note 410799 - Enhancement of line item extraction FI-GL, FI-C

    Please read this note on this part: ....  Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the

  • "create aac version" only makes another .m4a file...

    I am trying to use the "Create AAC Version" (right click on album) to create some files for playing in the car. When I select that option in the dropdown I find iTunes does indeed create a copy of the songs on the album but the file extension is dupl

  • Illustrator Icon in Creative Cloud

    I have uploaded a 33mb file to the Creative Cloud.  It displays as an icon, and won't show either of the 2 artboards contained inside.  It happens in Chrome and IE on my Win7, as well as Safari on my iPad2.  Same as if I try to import an artboard int

  • Embedding Quicktime Movies in a webpage

    Hi, I have a lot of quicktime movies stored on a server. I'd like to create a page on the fly somehow, so the movie is embedded in the webpage. Is there something similar to Verity that can do this? Can anyone think how I could go about this? Basical