Using the JDE Connector to Auto Provision (11g)

Looking for companies using OIM 11g who have recently setup auto provisioning using the JDE connector. Any insight (gotchas, etc.) you could post here would be appreciated.
Edited by: user13686208 on Mar 23, 2011 12:02 PM

Ranjini,
By auto-provision, do you mean all users default gets an AD resource?
To start off with,
1)are you able to manually provision users to AD?
If no, then ur problem is with the AD Connector parameters or Task Create User.
If yes,
2) do you have an access policy for provisioning?
If no, you need to create a policy to provision the AD resource to the All User Group.
If yes, need to check if the users are part of the group and also try retrofitting the policy.
Rgds, Ajay

Similar Messages

Can you use the iPod connector cable to charge the iPhone or

only the cable that came with the iPod?
Also, I put the iPhone briefly into my old inMotion speakers and a message
came up saying that the device didn't support an iPhone and would either not
charge my iPhone or have bad consequences for my iPhone-i wasn't sure-it did
work in the speakers tho.

I use an iPod connector almost all the time and have never had a problem, even after market iPod connectors, but you'll get a different response depending on who you talk to. The guy at the Genius Bar told me yes, but phone support said no. Short answer...You should be able to use the iPod connector.
When you plug the iPhone into some 3rd party devices, you'll get a message stating "not compatible with iPhone" but that is because you are going to get interference because of the cell signal. You can put it into Airplane mode to avoid the interference or just deal with the interference and just click OK. That being said, I have read other posts where these devices do cause damage to the iPhone so proceed at your own risk.

HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

I'm having same problems. If I connect my blackberry it says it uses too much power. If I take sd card out of phone and connect that way I get the same message. The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras.......... I'm still trawling the site to find any such list! Just need to know if it will work with a blackberry ..... If not I've got to take it back. Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics. I don't own a traditional camera because my phone has a great one. Really don't want to have to carry a camera about with me! They don't make it easy do they!

I can't import my pictures using the apple connector

I am trying to connect my camera directly to the iPad using the apple connector. I keep getting a message. The connected USB device is not supported.
Thanks for ur support.

You've changed the camera's Communication menu option to be 'PTP' and not 'Normal' (that works on mine) ?There is this page related to the kit and the 20D : http://support.apple.com/kb/TA24008

D800 file compatibility: Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit? I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB or SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.

Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Also, the movie files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
 Cheers, Tom

Additional runtime license fees per user in order to use the Java connector

Hi All,
I have one question.
Do we require to pay additional runtime license fees per user in order to use the Java connector (Jco) supplied by SAP?
We're currently not using the Jco but are looking into the possibility of using it.
Thank in Advance.

Hi All,
Please answer my question
We need to use Jco to connect to our 4.6C SAP production system. We do not have Portal or any other components. It's just a plain 4.6C system, service pack level is 23.
We are currently paying license fees for using the system on a per user basis.
Thank You.

HT4106 Can you transfer data to usb stick from an ipad using the camera connector?

Can you download data to a usb stick using the cammera connector?

The camera connection kit can only be used to import photo/video files form a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Can I tranasfer photos FROM my iPhone4s to my iMac using the dock connector?

Can I tranasfer photos FROM my iPhone4s to my iMac using the dock connector? Not WiFi or the cloud.
The manual is no help. Neither is FAQ's.
Thank you.
Jerry

Yes, if you're talking about the photos in the camera roll.
Plug it in and open iPhoto. It should appear like any other digital camera.

When using the DCOM connector to build component dll,Error ...

When ussing the DCOM connector to build component dll,
i get an error massage saying.
"Nmake in Project directory failed. A detailed description of the error can be found in C:\Documents and Settings\CTHuang0\My Documents\Lib2\SAPInterface.log "
and the error massage log note as below
PS :I have installed VC6.0
well...thanks for your respond
C:\Documents and Settings\CTHuang0\My Documents\Lib2>CALL "C:\Program Files\Microsoft Visual Studio\VC98\bin\vcvars32.bat"
Setting environment for using Microsoft Visual C++ tools.
Microsoft (R) Program Maintenance Utility   Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
     midl.exe /Oicf /h "SAPInterface.h" /iid "SAPInterface_i.c" "SAPInterface.idl"
Microsoft (R) MIDL Compiler Version 5.01.0164
Copyright (c) Microsoft Corp 1991-1997. All rights reserved.
Processing .\SAPInterface.idl
SAPInterface.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\oaidl.idl
oaidl.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\objidl.idl
objidl.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\unknwn.idl
unknwn.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\wtypes.idl
wtypes.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\ocidl.idl
ocidl.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\oleidl.idl
oleidl.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\servprov.idl
servprov.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\urlmon.idl
urlmon.idl
Processing C:\PROGRA1\MICROS3\VC98\INCLUDE\msxml.idl
msxml.idl
Processing C:\Program Files\SAPpc\SAPGUI\rfcsdk\include\sapconn.idl
sapconn.idl
     rc.exe /l 0x407 /fo "SAPInterface.res" /d "NDEBUG" "SAPInterface.rc"
     cl.exe /nologo /GX /MD /W3 /O1 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_USRDLL" /D "_ATL_DLL" /FD /c /Fp"SAPInterface.pch" /Yc"SAPInterfaceAfx.h" SAPInterfaceAfx.cpp
SAPInterfaceAfx.cpp
ztsd0005.h(227) : error C2059: syntax error : 'constant'
ztsd0005.h(228) : error C2143: syntax error : missing ';' before '}'
zssd0021_atp.h(53) : error C2059: syntax error : 'constant'
zssd0021_atp.h(54) : error C2146: syntax error : missing ';' before identifier 'rfc_padd_4_4bperC'
zssd0021_atp.h(54) : error C2059: syntax error : 'constant'

Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG

How can you export photos using the USB connector?

I am on vacation and trying to export photos from the iPad to a flash drive using the connector I bought from Apple. It doesn't seem to allow this function. Do I need an app to help with this? Thanks.

Hi there,
The iPad Camera Connection Kit can only import images from cameras or SD cards, onto your iPad. It cannot operate the other way.
It does not support most flash drives anyway.
I urge you to submit feedback to Apple on this matter:
iPad feedback
Nathan

Why can't I download from my GO PRO sd card using the lightening connector?

I bought the lightening SD card adapter thinking I could use my iPad to store films and still pics from my GoPro Hero 3 SD card to fr space when on holiday....
When I plug it in with the SD card from my normal camera it works fine but when I use the GoPro SD it says it can't import. Is there an app or something others use?
Cheers

There appears to be no published SD card size limit, but in this forum and other forums, users report that SD cards are limited to 32GB.
This may be of interest:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

Can you take photos on digital camera and see them appear on the ipad using the camera connector

Can you take photos on digital camera and see them appear on the ipad - i have a canon 400d and the new ipad.......

The camera connection kit accepts only SD camera memory cards.
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

Configure OSB 11g to use the same domain as SOA Suite 11g

Hi,
A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
After SOA suite install , I Configure Oracle SOA Suite by following the below path
Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
I have seen another path to configure soa suite from oracle doc
SOA_ORACLE_HOME\common\bin\config.cmd
eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
both directory str are correct?
After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
<Middleware_Home>\oracle_common\common\bin\config.bat.
eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
Thanks in advance
jk

Eventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
Regards,
Anuj

Using the JDE Connector to Auto Provision (11g)

Similar Messages

Maybe you are looking for