Using the labview conversion package (776874-03) on a Mac?

I just received the labview vi conversion package (from 2.x or 3.x). I am trying to convert vi's that were written in Labview 2.0. Every Mac I have tried to use (new or old) can't open the labview program in the Mac folders on the conversion CD. Are there additional drivers I need to use this?

Are you runnning the code in classic mode? I am sure the old LV will not run on OSX.

Similar Messages

  • Assistance with Printing to Zebra QL220 using the LabVIEW report VI

    I currently am trying to use the LabVIEW report VI to output a formatted set of strings to the above mentioned printer.
    The UMPC hardware that runs the developed application is bare bones XP box and doesn't' have MS office installed
    I use the LV new report set to a standard report and  successfully set orientation to portrait or Landscape, set margins and set report fonts and headers.. However  in sending the text strings to this label printer (labels are 45mm X 60mm) I find that that two issues arise.
    1. Printing out double labels. The pagination fails and prints a blank label after each print when text is output.  However if I disable all headers and body text (i.e blank label print). This pagination works fine.?
    2. The formatting of the information on the page reliably, I currently use inserted blank spaces, is there a better way?
    I thought, perhaps I should try using the ZLP programming language, but then not sure how to I send it to a USB printer? Has any one had any experience with this and these label printers ?  
    Thanks
    Greg Nicholls

    hi all
    i am C sharp programer
    and i have zebra QL 220 plus
    and roll type is 42X20mm
    and i have the zebra sdk
    and i create mobile application in C# smart device
    and i tring to connect to printer from my application by bluetooth
    in sdk i got this and use
    using System;
    using ZSDK_API.Comm;
    using System.Text;
    using System.Threading;
    // This example prints "This is a ZPL test." near the top of the label.
    private void SendZplOverBluetooth(String theBtMacAddress) {
    try {
    // Instantiate a connection for given Bluetooth(R) MAC Address.
    ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
    // Open the connection - physical connection is established here.
    thePrinterConn.Open();
    // Defines the ZPL data to be sent.
    String zplData = "^XA^FO20,20^A0N,25,25^FDThis is a ZPL test.^FS^XZ";
    // Send the data to the printer as a byte array.
    thePrinterConn.Write(Encoding.Default.GetBytes(zplData));
    // Make sure the data got to the printer before closing the connection
    Thread.Sleep(500);
    // Close the connection to release resources.
    thePrinterConn.Close();
    } catch (Exception e) {
    // Handle communications error here.
    Console.Write(e.StackTrace);
    // This example prints "This is a CPCL test." near the top of the label.
    private void SendCpclOverBluetooth(String theBtMacAddress) {
    try {
    // Instantiate a connection for given Bluetooth(R) MAC Address.
    ZebraPrinterConnection thePrinterConn = new BluetoothPrinterConnection(theBtMacAddress);
    // Open the connection - physical connection is established here.
    thePrinterConn.Open();
    // Defines the CPCL data to be sent.
    String cpclData = "! 0 200 200 210 1\r\n"
    + "TEXT 4 0 30 40 This is a CPCL test.\r\n"
    + "FORM\r\n"
    + "PRINT\r\n";
    // Send the data to the printer as a byte array.
    thePrinterConn.Write(Encoding.Default.GetBytes(cpclData));
    // Make sure the data got to the printer before closing the connection
    Thread.Sleep(500);
    // Close the connection to release resources.
    thePrinterConn.Close();
    } catch (Exception e) {
    // Handle communications error here.
    Console.Write(e.StackTrace);
     and once i use ZPL method it print 17 barcod always with 16 blank Patches (labels)
    and  when i use CPCL method it print 12 BarCode always with 11 blank Patches (labels)
    and i dont know why ?
    it must print 1 Patch (label)
    what i can do  and i dont think there is eny rong with my code
    all waht i want is how i can give Length and width and how much label print coz it is always print 17 or 12 what i can do ?

  • How can I use the LabVIEW Symbol Editor as a Sub-VI?

    How can I use the LabVIEW Symbol Editor as a Sub-VI?

    mc-hase wrote:
    > Thank you for your ansver.
    > That means that you see no possibiltiy to use the built in window? (I
    > think the built in window is programmed with LabVIEW as well...)
    The icon editor at least up to version 7.0 of LabVIEW is not written as
    VI but directly implemented inside LabVIEW, which is written in C/C++.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • I need this file "How to Use the Content Conversion Module in JMS Adapter"

    Can someone send me this file:
    "How to Use the Content Conversion Module in JMS Adapter"
    I am not able to find it.
    Thanks
    Antonello

    pls refer guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
    Regards,
    Swetha.

  • Who is eligible to use the Labview 8.0 Student Edition

    Who is eligible to use the Labview 8 student edition? Can an individual who is not in school or affiliated with a learning institution purchase and register it for the purpose of learning at home?

    This post was answered here
    Chetan K
    Application Engineering
    NI

  • Using the Auth pear package with php 4 and oracle

    Hi all.
    I was wondering if anybody out there has had any success (or else) using the Auth Pear package with php 4 and Oracle.
    I'm trying to do just that but can't get it to work.
    I've found lots of examples on the web for mysql but none for oracle...
    Feedback on your experiences with this would be most appreciated.
    Thanks in advance.
    Rob

    Hi cj.
    Thanks for your advice. I came across those documents but discarded them as they didn't deal with the Auth pear package I was intending on using. I didn't want to look at other alternatives as the focus of my project was primarily on migrating existing data from a mysql setup to an oracle setup. And quickly.
    I hadn't found any documentation out there on using Auth with Oracle. All examples available on the web were mysql specific.
    I eventually got round to gutting the code from the package and finding the fix to my problem.
    Just for info, Auth expects by default an auth table containing two fields username and password. That's lowercase table and field names.
    If the table name or field names to be used differ from these then they must be explicitly defined when calling Auth. Doing so resolved my problem.
    My mysql db had all lowercase naming, while my oracle db has all uppercase naming throughout.
    It is important to note that the Auth package uses the table and field names quoted, thus referring to the table and fields in a case sensitive way.
    So for an uppercase table and fields setup the call has to be :
    $options = array(
        'dsn' => "$dsn_for_my_oracledb",
        'table' => 'AUTH',
        'usernamecol' => 'USERNAME',
        'passwordcol' => 'PASSWORD',
        'db_fields' => '*',
    $a = new Auth("DB", $options , "loginFunction");I hope this helps anybody trying to use this package with oracle. It worked great for me.
    Pear Auth package documentation:
    http://www.pear.php.net/manual/en/package.authentication.auth.intro.php
    Regards,
    Robert

  • HT1338 using the Optional Installs package on your Mac OS X install disc,

    How do I use the optional installs package without a disc?

    you're question is a bit vague, are you trying to utilize the online OS X installation from the recovery partition? If you wan't to selectively install or re-install various packages there is an applications called Pacifist that enables you to choose packages from the InstallESD.dmg. If you have downloaded the Install Mounatin Lion application, there's several ways of accessing this disk image. The simplest is to click "Go To Folder..." under the Go tab of the finder menu and type the following "/Applications/Install OS X Mountain Lion/Contents/SharedSupport". make a copy of the InstallESD.dmg file and then when prompted by Pacifist select the file.
    What exactly are you trying to do? Are you looking for X11/Xquartz? If you give a little more specificity I can probably help you accomplish your objective.

  • Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

    Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
    �Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
    I would like to see NI provide a VI for parsing it�s own schema.

    LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
    By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
    a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
    See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Using the LabVIEW (PDS), version 6.0, I cannot find the "Application Builder".

    Hello,
    I use the LabVIEW Professional Development System, version 6.0. However, I cannot find the "Application Builder" in the "Tools" menu.
    How can I install this toolkit from the CD?
    Thanks.

    Hmmm... The App Builder is located in the project folder:
    project\prodisttool.llb\build application.vi
    Make sure this LLB is in your project folder. Also... have you changed the location of your "Library folder" under tools>options ? LabVIEW looks for the project folder inside your "Library folder" whose default is usually something like this on a PC:
    C:\Program Files\National Instruments\LabVIEW\
    So the App Builder should be at:
    C:\Program Files\National Instruments\LabVIEW\project\prodisttool.llb\build application.vi
    If you changed your Library Folder, LabVIEW might not be able to find it, and then you won't see it under Tools

  • Who is eligible to use the Labview 8 student edition?

    Who is eligible to use the Labview 8 student edition? Can an individual who is not in school or affiliated with a learning institution purchase and register it for the purpose of learning at home?

    LabTech wrote:
    Maybe I'm missing something, but I still am not sure of the answer to my question about the Student Edition . Maybe it hinges on what the word staff means in this case?
    I would interpret "staff" in the most general case. If you are employed by an educational institution, and not student or faculty, your'e probably "staff".
    The main restriction on the student edition is in its use. You can only use it for personal educational use and not for research. For research in a lab, you need to get the real LabVIEW. See e.g. point #4 in the FAQ: http://www.ni.com/labviewse/labviewse_faq.htm ).
    Still, the educational discounts are great (75% on single copy software: http://www.ni.com/academic/edu_dsct.htm ).
    Message Edited by altenbach on 09-13-2006 10:02 AM
    LabVIEW Champion . Do more with less code and in less time .

  • Can I use the labview run-time engine 2010 with my LV 2012 program?

    Hi all,
    I will receive the new Labview Developer Suite 2012 DS2 in a few days and
    I am wondering if it is possible to run LV2012 programs on the LV run-time engine 2010 or is it necessary to update all my clients from run-time engine 2010 to 2012?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Hi Benjamin,
    You will not be able to use the LabVIEW 2010 run-time engine with LabVIEW 2012 applications.  Versions of run-time engines need to correspond with the version of LabVIEW that you have installed.
    The following links direct you to our download pages for the run-time engine:
    The 32-Bit Run-Time Engine can be downloaded from our website as can the 64-Bit Run-Time Engine, depending on which version of operating system you, use by clicking the link under "Standard Download".
    Hope this helps.
    Marshall B
    Applications Engineer
    National Instruments UK & Ireland

  • ?How to use the Adobe Cloud Packager to install Acrobat

    I am trying to install Adobe Acrobat using the Adobe Cloud Packager. I can create the Package but the installation fails.

    Hi LizAuchincloss,
    Please install Acrobat from the Exception folder using exception deployer command line:
    The following command is used to deploy Acrobat for Windows. (You will recollect that Acrobat for Windows should be deployed before deploying the main package.) The --mode=pre option specifies that Exceptions Deployer Application is run before deploying the main package. The installLanguage is specified as en_US (US English)—this option is also mandatory while deploying Acrobat for Windows.
    ExceptionDeployer --workflow=install --mode=pre --installLangauge=en_US
    Please refer the mentioned kb: http://helpx.adobe.com/creative-cloud/packager/using-exceptions-deployer.html .
    Regards,
    Romit Sinha

  • How to Run teststand sequence file using the LabVIEW

    Hi
    I want the execute the Teststand Sequence file using the LabVIEW .Net containers.I didnt find out the Execution Parameter in the .Net Container.Do you any suggestion regarding this question.Please let me know.
    Jayavel

    TestStand comes with loads of Operator Interface examples some simple, some full fledged. You can find it in teststand public folder win7 path here:C:\Users\Public\Documents\National Instruments\TestStand 2010 SP1\UserInterfaces
    You can take these examples or use ideas from here, also read the teststand reference manual. It has a section about Operator Interfaces.
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Curious, How many people use the IMAQ Vision package?

    Yeah, just wondering... how many people here use the IMAQ Vision package on a regular basis?
    I do, for one.

    Add one to the counter
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Hi I'm using the latest version of acrobat pro on a Mac i cannot save or print anything as a pdf from the internet i just get a black screen

    Hi I'm using the latest version of acrobat pro on a Mac i cannot save or print anything as a pdf from the internet i just get a black screen, my previous version worked fine, any ideas please

    You can read this article to see if it helps:
    http://kb.mozillazine.org/Problems_printing_web_pages

Maybe you are looking for