Using the LaserJet's EWS to read Toner Levels

The EWS (embedded web server) is a helpful tool that is used in many ways related to Networking. The EWS can give information on Web Services and also allow one to set Static IP and Static DNS's on the printer.
But, if one is hooked up to the network via Ethernet or through a wireless connection with their Laseret, it is also a great way to check Toner levels and print reports such as the Usage page to know the printer'spage count.
To access the printer's EWS. Take the printer's IP address and type it into a browser on the computer. The IP address can be found under the printer's wireless settings on the display screen or on the Network Configuration Report that one can print out. I did my review on the LaserJet CM1415fnw printer for the purpose of this post. I just touched the wireless button that displayed the wireless settings information of the IP address and the SSID.
Once one has typed that address into the browser (in this case I used Chrome), the EWS will open up to a home screen that will show some basic information on that page. It will be showing the estimated ink levels for the printer.
It will be set to the Status tab and will be showing an approximate representation of the toner levels for each color. If One want more detailed information, click on the green button labeled Supplies Detail in the lower right corner of the screen. That will open up to a screen that breaks each cartridge down further by supplying information on:
Approximate pages left that the cartrige can print
Pages printed with this supply
First install date
Date that the cartridge was last used
So, for those who are connected wireless or by Ethernet to the printer; here is another option to find information on your ink levels. These steps and information listed are general guidelines.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
This question was solved.
View Solution.

I hope that this helps and that the community finds this informative. Happy Printing!
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

The new ibook app and ibook update is designed for iPhone 5 operating system. When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books. Can I get the previous ibook app back on my phone.

The new ibook app and ibook update is designed for iPhone 5 operating system. When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books. Can I get the previous ibook app back on my phone.

Check your trash can on the desktop. The old version is automatically moved to the trashcan. You should be able to move it from the trashcan back to the Apps folder within the iTunes folder. The update that was pushed out was for iBooks to work with iOS 7 not iPhone 5. iOS 7 was released today.

I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

DesertCatVicki
I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

I can't view/open attachments unless I use the option "view in classic reader". This is very unhandy. Any ideas on how to fix? Version 31.3.0

I use Thunderbird (Ver 31.3.0) for several email accounts and on my main account only, it rarely shows the attachments in the email. There used to be a button to click on to either "preview", "open", or "save" ("preview" option is only for pdf attachments). That whole menu bar is gone. But only on my main account, the other accounts all work okay. The only way that I've found to be able to get to the attachment is to use the "view using the classic reader". Then I have to click on the attachment and it downloads it and opens it up. I'd like to get the options back without having to do all the extra clicking to get to the attachments.
Thanks!
~Konce

Yes, when I disable the conversations add-on, I can then get to the attachment...but I like the conversations add-on otherwise and it used to handle the attachments just fine.

Using the JavaScript Debugger with Adobe Reader X (10.1.0) ?

Hello all,
Quite new to JavaScript in Acrobat I am trying to write a 4 page Form with CenoPDF and check/debug it with Adobe Reader X (10.1.0) on a Windows 7 (32bit, usually no Admin rights) PC. I realise Acrobat Professional would be a more appropriate tool, but for the moment I hope to get away with Reader.
Following this instruction I managed to get the Javascript Debugger running with Reader X, but there is a serious issue:
The Debugger window often crashes - and with it the whole Reader - after clicking around on a few controls (triangles in the Scripts window or others). First the font changes, then letters disappear, controls disappear and soon after the whole user interface freezes (see the two screenshots below).
Questions:
Do others also have problems with crashing Debuggers?
Is there a known solution or work around to this problem?
Many thanks for your help or some info, BobDuke

I am having the same problem. Win 7 or Win XP doesn't matter the problems seems to be with Adobe 10.1.0. Works ok with Word, but not adobe reader. Doesn't un-collate if the box is checked. Tried to unchecked then recheck. Use to work but now it doesn't.

When using the vi: "FLUKE 884X Series Read Single Measurement.vi" with a FLUKE 8846A it is reading an "overload" error message

The vi: "FLUKE 884X Series Read Single Measurement.vi" can be downloaded from "http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=9431"
I want to use this driver to read out a 4-wire resistance which in deed is a PT100 resistor to measure the temperature.
When i click on the "run continuously" - button on the LabVIEW Front Panel, the program reads out the current resistance.
However after each readout there comes the "overload" - error message on the display of the 8846a multimeter.
Sometimes there can be also seen a small "error" - sign on the display and sometimes the 8846a beeps.
I already deactivated the "ID-Query" in the "Initialize.vi"
What can i do to prevent these error-messages ?
Solved!
Go to Solution.

heinzmann wrote:
When i click on the "run continuously" - button on the LabVIEW Front Panel, the program reads out the current resistance.
What can I do to prevent these error-messages ?
No no no. The "run continuously" button is for debugging only and should not be used to run the program at all. If you are polling your instrument to often it will be confused. Check your timing. I think your program poll your instrument at "full speed", perhaps it works because you open and close GPIB driver on every iteration, giving some delay between each readout.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Using the Borland Database Engine to read AND write SHARED Paradox Database Tables

I need to read and write Paradox database tables with a C# AT THE SAME TIME AS people using the Paradox tables with legacy Paradox programs interactively.
I think the only way to do that reliably without corrupting the tables is to use the BDE Borland Database Engine.
Does anyone know how to do that? I found this c++ program... But I don't know how to integrate this into c#
http://www.codeproject.com/KB/database/bdedatabase.aspx
Is there another way to do this? Again, most important, I don't want to corrupt the paradox database.
I can read the paradox records all day long, that is no problem, it is updating at the same time as the legacy program users..
I also know that the whole thing needs to be updated, but that can not be done overnight.
Thanks in advance
Dave

Being pretty new to programming, I am trying just to read info from Paradox tables with C#. Info is actively being updated from another program at the same time. The program I am trying to write only needs to read data. The other program does use the BDE,
so it is already present running on the computer.
I've been looking at code but just haven't found quite the right combination.
Thanks. Any help is greatly appreciated.

Is there a way to use the FF vi's to read and write complex data types; specifically, clusters?

I'm trying to interface with a Fieldbus device through LabVIEW. I need to be able to read and write a variable that consists of a cluster of two unsigned int 32's. The FF vi's provided with FF Communications Manager 3.2 do not support clusters. I have tried to use a code interface node to write my own, but the CIN's I was using before to do this function do not give me a device list anymore (they were originally written on Communications Manager 2.3.5). I have recompiled the .lsb, as well as trying to use the older versions of the header and library files. Is there another workaround I can use?

Hello Bryan,
The BrowseDeviceList VI was released within NI-FBUS 3.2. For NI-FBUS Configurator 3.1, please unzip the attached file and copy the "addon" and "Ff" folders into "\vi.lib" directory. LabVIEW 7.1 or above version is required for using these addons.
And for your information, there is a free upgrade (version 3.1.1) for NI-FBUS Configurator 3.1 users. Here is the link to the upgrade kit.
http://digital.ni.com/softlib.nsf/websearch/00A1614EC291219586256F390020671B?opendocument&node=132070_US
Hope it helps!
Regards,
--Josiane
Attachments:
locate_fflv_in_labview82.jpg ‏214 KB
vi.lib.zip ‏391 KB
locate_fflv_in_labview71.jpg ‏193 KB

Has someone already succesfully used the ni i2C library to read/write an eeprom with ni pxi 6551 on labview?

Hi,
I'm trying to read/write an eeprom with an i2c protocol and ni pxi 6551 module.
At first, I tried to simply read the eeprom, because i know i am expecting 11111111 as a response, but it did not work.
So I tried something easier, and I succesfully wrote a pcf8574ap.
But i can't read it.
Seems like I am not able to "hear" the answer; when the sda line should be filled with an 8bit information, it remains at Z-state.
And because I am using the i2c library, i think there might be a problem with this library, or i am doing something wrong.
Hoping someone has an answer.
Johanna

I think the best place to ask your question in this thread
I2C Digital Waveform (IDW)
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How to use the 'Username' filed's value in form level scripting?

Hi,
I have applied the Rights Management for a form. I wanted to use the 'Username' field's value, which is present in below image for the form side scripting. How can we get this value? Any script is there to extract this value in the form?
Thanks in advance,
Arjun

Hi Jo,
Thanks for the reply. The settings (MobileEngine.Security.SyncPasswordFieldAtLogon=true) in my Mobile client is such that when i open it i am asked the User, Logon Password and the Synchronization password(which is not mandatory). So if I dont even enter it during logon i am asked to enter it when i hit the sync button on the client.
But if i have entered it during logon and then hit the sync button on the client, that time i am not asked to re-enter my sync passwd and the client syncs with the b/e. Which means that the sync passwd i had entered during logon is definitely stored somewhere.
What i mean by using the sync passwd in applications is this :-
-> In a generic sync appln before synchronising with the b/e we need to give the sync passwd to the SyncManager. How do we get this sync password from the user of the appln?
-> We can either ask him to enter it as in input to a jsp OR else since he has already entered it during logon we need not ask him to enter it again and retrieve it via some API.
Is this possible.
Thanks & Regards,
Saurabh.
Message was edited by:
Saurabh Agarwal

Hi. a blind web site development student from australia. i use the jaws for windows screen reader fr

e e

Someone who uses such features may be better placed to assist you, and as far any policy issues are concerned I am not sure the best place to ask.
Have you seen
* http://www.accessfirefox.org/
* and our kb article [[Accessibility]]
** I note that links to an archived article, I have now asked about that, maybe it is an article that should be updated and unarchived https://support.mozilla.com/en-US/forums/knowledge-base-articles/707737
BTW Does your screen reader cope ok with inline links ?
* [[accessibility]] link is https://support.mozilla.com/en-US/kb/Accessibility if that is easier to read.

Using the eStation Zeen as e reader

Just purchased a C510 HP all in one printer, that has an attached e station zeen tablet.
I was told that this tablet could be used as an e-reader, but I do not have that app
on the tablet, and Barnes and noble is only available in the US and I am in Canada,
Can anyone tell me how to get e books on my zeen.
Thanks

Hello Sharon,
So what you could do is open your tablet and then you will see the bottom bar to where you can slide it up and then Select to add a new app
-do this and then go down until you see Ebooks, Select that, Thos should loads different apps and even diferent books For the feature you are looking for
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

How to scan using the Laserjet 100 color MFP m175nw printer

Hello,
My printer stopped printing suddenly so I downloaded the ePrint and it worked. . . but now I cant scan ! I dont have the option to scan.
Please help!

Hello,
Please run toHPPSdr firstly and follow the step if its show.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-141416-1&cc=us&dlc=en&lc=en...
If its not work may be we have to change the file name Twain_32 which located in C:\Windows
Please try and let me know if it is work or not .

I have an ipad2 and everytime I try to use the camera conector kit to read a sd card I got a message saying that the device is not compatible withe the ipad, can any one help me please?

Subject:

First, try gently blowing into the dock connector on your iPad to make sure there's no debris in there. That can sometimes cause accessories to malfunction. If that doesn't clear it up, try rebooting your iPad:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
Rebooting your iPad can solve a lot of problems.

Using the LaserJet's EWS to read Toner Levels

Similar Messages

Maybe you are looking for