Using the latest firmware. My WRT54GS (connected through...

Using the latest firmware. My WRT54GS (connected through a LAN cable) seems to randomely disconnect me from the internet for no apparent reason. For some reason, it can't find the DNS even though my cable modem shows that a connection is there. The only way I can get it working again is unplugging the router, reconnecting the, going into the router status menu and hitting DHCP release, then DHCP renew.
I'm not sure whats causing this though. Any help would be appreciated.

My GSv6 will function perfectly until my cable ISP decides to change my WAN IP address. When they do that the router will drop internet connection and I have to go throught the reboot process for the modem and router. Sometimes this works and all is well again until the next ip change, but other times there are still sporadic outages.

Similar Messages

What's the latest firmware for WRT54G?

For my Linksys WRT54G router, my current firmware is 4.21.1.
When I browse for new firmware (by choosing 4.0 on the drop down menu), it says that I have the latest one. Is this true or am I searching for it wrongly?

dudztgp wrote:
Make sure to select the proper hardware version before the firmware. If your WRT54G is hardware version 4.0, then you have the latest firmware already installed.
Underneath my router it says "Model No: WRT54G ver.2"
And I upgraded my firmware a couple years ago and it is 4.21.1.
Am I fully updated or no?

Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur.

I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via bluetooth whenever I try even though both shows that the devices are discoverable. I need help!

I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.

What model iPad?
What model computer and OS version>
AirDrop requires:
What you need
To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
iPhone 5 or later
iPad (4th generation or later)
iPad mini
iPod touch (5th generation)
You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
Learn more about using AirDrop to share with people using a Mac with Yosemite.
Use AirDrop to wirelessly share content - Apple Support
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop

How can I get the latest firmware for a WRT54GS 7.2? I ac...

How can I get the latest firmware for a WRT54GS 7.2? I accidentally downgraded to 7.2.05, and it came with 7.2.06.

Thank you! I tried that link, it came as a page not found on the Linksys site. I went to the UK version of the Linksys site, and they don't list the 7.2 version of the router. They only go up to 6.0.

My iphone4s will charge but not sync when connected to my macbook pro, using the latest itunes

My iphone4s will charge when plugged into my macbook pro but will not sync. I am using the latest version of itunes and I already tried restarting both the computer and the device. What gives??

After days mucking around this worked for me..
For Windows Vista, Windows 7, or Windows 8
Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose Update Driver from the shortcut menu.
Click "Browse my computer for driver software."
Click "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.

When I go to open Yahoo mail it tells me I should upgrade to the latest version of Safari. When I check for upgrades through Apple it says I am using the latest version. What am I not getting here?

When I go to Yahoo mail it tells me I should upgrade to the latest version of Safari. When I go to apple to do the upgrade it says I am using the latest version.
What am I missing here?

You can avoid using web based email for Yahoo.
Open Mac Mail. From the menu bar click Mail > Preferences > Accounts > Account Information
Then click + to add your Yahoo account.

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

What is the latest firmware version for iPod Photo?

I got a iPod Photo 60Gb and try to connect this to my Ice Link Gateway 500 in my car. It work fine on my other car using icelink but doesn't work with the new one. It say it does support iPod Photo. I wondering what version should it be on?.. I test other iPod Nano that work fine on it. I guessing it doesn't detect the gateway 500 as it automatic show up on iPod Nano screen. Where my iPod photo saying It is ok to disconnect.

What is the latest firmware version for iPod Photo?
1.2.1.

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.

I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.

I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole.

Hello, iam using the latest version of firefox, whenever i login into my yahoo mail account i get a stop script error, the details of the error script is mentioned below , please suggest how to stop this : STOP ERROR

Hello, iam using the latest version of firefox, whenever i login into my yahoo mail account i get a stop script error, the details of the error script is mentioned below , please suggest how to stop this
the website is www.mail.yahoo.com. i was getting the same STOP script error every now and then in firefox 6 as well

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Do The New Nokia N97's Have The Latest Firmware Ru...

Do the new nokia n97's have the latest firmware running on them (V20) or do i have to upgrade it after it arrives?
Solved!
Go to Solution.

That depends how long it has been since the phone left the factory? It is possible that some retailers have a stock that is very big, so that the phones that they sell right now have a firmware that is a few months old...
Where are you planning buying the phone?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Nokia 6300 says I have the latest firmware, nokia....

There is a new firmware out for my Nokia 6300, but the phone says it have the latest firmware, when I check via the "telephone updates" in the settings. I want the latest! I dont have a cable, or Bluetooth on my pc. I have it on my Mac. Is it possible to update via my Mac with BT?

Updates are not possible by bluetooth, and currently not possible using a mac.

What is the latest firmware & version of SANtricity for my FlexLine 280's?

We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?
Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?
Thanks for any help,
Nathan

NNellans wrote:
We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
The f/w 7.x isn't supported for the FLX280. The latest f/w is 6.60.xx.xx and there will be not 7.x f/w for the FLX280. In other words, the 6.60.xx.xx is the latest f/w we'll have for the FLX280.
I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?AFAIK, the latest f/w is 06.60.11.20.
As for Santricity I cannot answer.
Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?You need to contact your Sun support representative to validate this.
Regards

Using the latest firmware. My WRT54GS (connected through...

Similar Messages

Maybe you are looking for