Using the loupe causes preview to change

I pull up a raw in bridge (same thing happens in the preview slideshow btw) and all is good.. but if I use the loupe to magnify once I close the magnify loupe the image totally changes. I'm guessing it's some default but I need help learning how to stop it from happening. I've checked my default for the raw images and it is NOT what I get after closing the zoom.
Does anyone know what I am talking about?

Laryl,
If you really want a 100% or "1:1" sized preview of your camera's rendition of the RAW data instead of Camera Raw's rendition, then shoot in RAW+JPEG mode and put the loupe on the JPEGs.
It's impossible to see the embedded preview in the loupe because the loop shows a 100% view, and the embedded JPEG previews are not full-size images. I suppose we could disable the loupe if you are viewing an embedded preview, but I'm not sure that would really be helpful.
The reason that the preview is updated to the Camera Raw render after you use the loupe, even if you have the "Prefer Embedded" turned on is that once we have to generate the 100% preview to show it in the loop, we thought it was worse to have the appearance of the image in the loupe and preview mismatched.
For example, imagine you have a file with ACR settings which convert it to grayscale, but you are browsing the file in Bridge with Prefer Embedded turned on. When the previews are initially cached you see the embedded, color preview. Then you bring up the loupe. Now, since there is no 100% embedded preview available, we have to get a high-quality preview at 100% from camera raw--which is grayscale. It looks pretty stupid (at least in my opinion) to have a loupe with grayscale pixels over a color preview, so Bridge replaces the embedded preview in the cache with a high quality (grayscale in this case) preview. Now the loupe and preview match. When you are done with the loupe, you could purge cache for the item if you really want the embedded preview to show up again in Bridge.
The primary goal of Bridge's previews and thumbnails is to literally pre-view what the file looks like when you open it in Photoshop or Camera Raw. Since the Camera Raw dialog is not going to show you the embedded JPEG, by default Bridge doesn't either. The option to show embedded previews is primarily there to speed the editing process. You gain preview-caching speed at the expense of fidelity between the Bridge preview and Camera Raw.
The ACR defaults only change if you change them, so you are in control of what is going on shoot to shoot. If you want to "bake" the current default into the settings for a RAW file so the appearance doesn't change when you modify the defaults again do the following...
1. Open the files in the Camera Raw dialog.
2. Click the Select All button in the filmstrip.
3. Select "Export Settings to XMP" from the fly-out menu by the settings sliders.

Similar Messages

Why can't i use the old remote control to change slides in the latest version

why can't i use the old remote control to change slides in the latest version of keynote

It would help to know what remote control your talking about, there are hundreds out there.

Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane. If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

Users are not able to save pdfs after editing. Product is Adobe XI, OS is Win7 64-bit. When saving, an error pops up that the file cannot be saved, it is in use. If they save as a different name, it works. Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane. They don't use the preview pane. I figured out that if they completely close the explorer window, they can save. But this means they have to open and close explorer for each file.

Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
use it without problems.
Submitting an official complaint whenever the phone reps start up again in the morning.

Using the "quick mask" tool to change a color

Good Day All
I am a wee bit confused. I wanted to show someone a way to change hair color in Photoshop CS5. Using the method I have used in CS4 I did the following.
In CS%, I clicked on the brush tool and then on the “quick mask” tool. Stared painting in the area I wanted to change. When I clicked to take off the quick mask tool, the paining I had done disappeared. That was it. In CS4 when I turned off the quick mask tool I would get an outline if the mask.
Is there a setting I am missing or has CS5 changed how this works?
Thanks All

Thank you Mylenium....
Here is more information.....
These are the steps I do and the changes that take place
1) Select the brush tool
2) Select quick mask. When I do this, on the layers panel, the background layer is not highlighted
On the bottom left hand side the “set foreground & back ground color changes from (foreround) black to gray and the background color stays white
3) Paint (it is red) the area I want to change and click on the quick mask.
The red where I painted disappears, and the outline is not showing. On the layers panel on the right hand side is now highlighted and on the bottom left hand side the set foreground color changes to black.
4) If I click on the quick mask, the painted area comes back.
I located the “quick mask” under the tab channels. It is displayed as a separate channel. When I turn off the quick mask, the quick mask channel disappears. When I turn on the quick mask, the quick mask channel reappears….
Do I have something set wrong

Using the color picker component to change background is coving up the rest of the elements

Hello,
I am trying to learn some scripting for components.
I have a bunch of stuff working and I got the color picker component to change the color of a movie clip and another one to change the text color.
I have another script that does the background color, but, when I use it with this script, it covers up the other components.
How can I use the color picker to change the background color of the stage without covering up the the movie elements?
Here are the two scripts:
script one-works fine on the 2 elements it is targeting
import fl.events.*;
import fl.events.ColorPickerEvent;
myColPic.addEventListener(ColorPickerEvent.CHANGE,changeHandler);
function changeHandler(event:ColorPickerEvent):void {
    var colorInfo:ColorTransform = new ColorTransform;
    colorInfo.color = event.color;
    myBox.transform.colorTransform = colorInfo;
    trace(event.target.hexValue);
myTextPic.addEventListener(ColorPickerEvent.CHANGE,changeText);
function changeText(event:ColorPickerEvent):void {
    var colorTypeInfo:ColorTransform = new ColorTransform;
    colorTypeInfo.color = event.color;
    myType.transform.colorTransform = colorTypeInfo;
    trace(event.target.hexValue);
Script 2-works fine in an empty movie, but if I add it to the script above, those elements get hidden..
import fl.controls.ColorPicker;
import fl.events.ColorPickerEvent;
var bg:Sprite = new Sprite();
bg.graphics.beginFill(0x000000);
bg.graphics.drawRect(0, 0, stage.stageWidth, stage.stageHeight);
bg.graphics.endFill();
addChild(bg);
var colorPicker:ColorPicker = new ColorPicker();
colorPicker.addEventListener(ColorPickerEvent.CHANGE, colorPicker_change);
colorPicker.move(10, 10);
addChild(colorPicker);
function colorPicker_change(evt:ColorPickerEvent):void {
    bg.graphics.beginFill(evt.color);
    bg.graphics.drawRect(0, 0, stage.stageWidth, stage.stageHeight);
    bg.graphics.endFill();
Granted, I they are changing colors differently, but I am not sure how to change the stage color any other way with this component.
any thoughts out there?
thanks
babs

Thanks kglad!!!
that did it

Created a circular shape using the elipse tool, how to change color?

This is a basic quesiton I know, but I'm lossed.
So I created a simple oval shape using the elipse tool, and the color is black. How can I change the color?

What setting did you use in the Options Bar: Shape Layers, Paths, Fill Pixels?
In the first case it would be easiest to change the color, simply double-click the resultant Solid Color Layer’s icon in the Layers Panel and select a new color in the Color Picker.

Playing music , using the speakers causes lag

Everytime I listen to music or watch videos after a certain period , the sound screws up and my laptop starts to lag , this happens everytime i use the speakers anyone know why this is happening , the lag is really annoying and makes my laptop slow

The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an Apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

How can use the active x excel to change the assigned data/number in my VI?

I have an assigned data in my vi using build array and insert into array. i can change the data in excel,
but i can't change the data in array, How can I connect/communicate/control the data in aray using active x excel.
(i know this is complicated that's why i'm trying to get helped)
(please lend me a simple example)
Thank You very much.

The one I pointed you to before was a bad example. Try the one here. The example returns the cell value as a string but that's easy enough to change. You can also modify it to return a range of cells to create a LabVIEW array. You can also search NI Dev Zone for other examples by going here and you can also search this forum for Excel examples.

Using IE 10 opening or trying to save file using the link cause IE to restart

I am using IE 10 and adobe reader 11.0.4 . ie When I try to open or save a PDF I get a message IE has stopped and checking on line for solutions and then just restarts IE. I have checked a similar post which mentions editing the registery but when I check it doesnt have that setting. I am also using windows 7 32 bit.
Cheers

Does the problem occurs with any PDF? Can you try opening this PDF: http://helpx.adobe.com/pdf/adobe_reader_reference.pdf?

HT1918 How do I change the region in my App store account if I have a minimal balance in credit that is insufficient to purchase anything? I keep on being told that I need to use the balance before I can change the region.

How do I change the region in my account details if there is a credit balance that is insufficient to make a purchase.
I keep being told that I cannot change the region while there is a credit balance.

Click here and request assistance.
(74813)

Using the onClick method to change a default text into a CFTEXTAREA

Hi,
I am trying to use the simple following method to change the
value of a Textarea field when the internet user click into the
field:
<cftextarea name="fYourMessage" label="Your Message: "
onclick="if(this.value=='You can use this text field to push a
personal message for your friend.')this.value='';">You can use
this text field to push a personal message for your
friend.</cftextarea>
But I have no effect at all using that method! I think I am
missing a knowledge about using CFFORM in a Flash method
(format="flash") were it might be not possible to use JavaScript in
the way I want it.
In any case, if somebody understand what I am trying to do
and have some information for me, please let me know! I am sure it
is simple to resolve this!

Hi,
Sorry misunderstood the question previously, you should probably use the Embed or Object tag of Html to send FlashVars to the flex application. I just googled and got some links.
http://kb2.adobe.com/cps/164/tn_16417.htmlhttp://www.mediacollege.com/adobe/flash/actionscript/flashvars.html
http://www.mediacollege.com/adobe/flash/actionscript/flashvars.html
Hope this helps.

How to change IP address and subnet mask without using the sys-unconfig ?

I have Solaris 10 x86. I've ran into problems using the sys-unconfig command
to change hostname and IP address.
How to I manually change the IP address and subnet mask values on Solaris 10 manually?
Thanks.

We just switched over a DNS server by using ifconfig, (same subnet), and killing named. seems to be working fine, anything I should look out for ?
steps:
Prep -
- change name in /etc/hostname.e1000g0
- change name and IP in /etc/hosts and /etc/nodename
- # uname -S dnsint02
Activate
- unplug old dnsint02
# ifconfig e1000g0 192.168.2.80
# kill -9 [PID of named]
Cleanup
- Remove old key on clients I SSH from.
- reconfigure backup software for new name/server combo.
Edited by: HarryC on Jun 25, 2009 9:29 AM

Bridge CS6 How to turn off auto tone adjustment for the loupe?

Adobe Bridge CS6. 'Apply auto tone adjustments' is unchecked in Camera Raw Preferences. Yet every time I click on an image in the preview panel it does a tonal adjustment before it magnifies the image detail. I am viewing bracketed images and do not want any auto tone applied at any time while previewing images. How can I turn off all auto tone adjustment for the program - including the loupe. I never had this issue in a previous version. I'm on PC. Thanks for any help!

All 4 Default Image Settings are unchecked. Checking this further I have found this is only a visual issue in Bridge Preview. I have opened the same raw file before any adjustment had taken place (w/o using the loupe magnifier) in PS CS6 - and then again opened it after using the magnifier which did an auto contrast adjust on the image. Both files are the same in PS CS6. This is only a visual issue within Bridge (Master Collection CS6) on my Win7 64 bit machine. No issue with a standalone PS CS6 version on my XP 64 bit system.
There is no auto adjustment of the image until I use the loupe (magnifier tool).
Note my previous comment as to what happens when I use it. Thanks!
I have a feeling this is a bug. I have a Photography help group on fb and posed this question to them. I had mostly no issue responses but got this from another person. I checked after reading this and it is the same issue with me - this only happens with raw files, not jpeg. Here is his comment line.
Carl, I see what you mean, I have tried several adjustments to the preferences and none seem to work. The image automatically adjusts after a brief time. There does not seem to be any way to turn off the adjustment. I'm using Bridge CS 6 on a Mac. I don't think it has anything to do with camera calibration, but it only happens when using RAW files. I tried it on JPGs and TIFFs and it did not adjust the loupe image. Wonder what Adobe has to say
So - tThanks for any thoughts! So at least it's not going to be an editing issue - but it's a pain here. I use Bridge to edit my shoots and I often shoot bracketed images. While I cull images according to the histogram, I also do visual assessment and I can't have Bridge doing it's own thing on tonal adjustment.

Problem importing two service interfaces using the same data types

Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
Mane

Sorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane

Loupe causes lockdown

Recently, since come upgrades to my computer, use of the loupe sometimes locks down the whole computer.
I had added an internal hdd for scratch, and a new motherboard and graphics card. Before the changes, I never had any of this type problem. Now, and not every time, but enough to be bothersome, using the loupe can freeze the computer where even ctrl+alt+delete will do nothing!!
I've got plenty of hdd space and ram, on a dual core AMD 64 4200+ system.
Any ideas??
Barry

OK, now it's not just the loupe!!
Anything in bridge, and even ACR!!
It just suddenly locks everything!
Ininstall and reinstall???

Using the loupe causes preview to change

Similar Messages

Maybe you are looking for