Using the Matrix Sequencer from Reason Rewire with Audition

Hello. I've been trying to copy the pattern I've made from the matrix sequencer into audition using rewire. Everything's all hooked up. I've tried exporting one of the patterned tracks as a midi file from the matrix and gotten so far as importing and seeing that the new midi track in Audition sees the note pattern as well as the Malstrom synthesizer. I just can't seem to get the track to be copied into Audition. Any suggestions?
Thanks!
-Christina.

There's no way to *directly* copy a Matrix pattern into Audition (or any other Rewire host). The only way to do it is to use the "Copy Pattern to Track" function. The process is fully documented in the Reason 4 Operation Manual (PDF) installed with Reason - see page 302. In short, this function copies a Matrix pattern to the Reason sequencer track for the Matrix.
The reason your export to MIDI file didn't work is that Reason only exports notes recorded in its sequencer. Matrix patterns don't get exported.

Similar Messages

How do I use the a command from a .dll with labview?

I want to use for example the M8784Open() command to control an M8784
photon counter. I know how to place a call library function node
but don't know where to go there. The user manual for the photon
counter has the following explanation of the M8784Open() command but I
don't know how to use their advice in labview!
7-3-1 M8784Open( )
Declaration HANDLE M8784Open( BYTE Board );
Parameter
BYTE Board
Specify the board to be used: M8784_MASTER or M8784_SLAVE. Specify both
when making 2-channel measurements simultaneously. It is not possible
to specify M8784_SLAVE only.
Return value A handle for the M8784 is returned when the function has succeeded..
INVALID_HANDLE_VALUE is returned if the function has failed..
Explanation Calls a handle to allow the M8784API.dll to use the M8784.sys driver.
Hereafter, specify this API’s return value (handle) when using other APIs.
When quitting M8784 operation, call up M8784Close( ) to cancel the driver.

You need to find out the equivalent number of the parameter. Somewhere in your documentation, or inside a file (for example, a header .h file in C/C++) you will find the definitions of each parameter.
For example, M8784_MASTER may have the value 1 and M8784_SLAVE the value of 2. You already know that it is a BYTE, so it will be a number of type U8 in LabVIEW. You need to find the exact values.
Probably, by value "A" it means the hex number "A", which is 10 in decimal. You need to find that in your documentation.
You also need to find the type HANDLE. It can be a BYTE, etc. Once you know that, find the value of INVALID_HANDLE_VALUE, so you can test for the error.
Most of this information can be found in the document Using External Code in LabVIEW. Check your help file, or check this link.
Regards;
Enrique
Message Edited by Enrique on 09-29-2005 10:36 AM
www.vartortech.com

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

HT201328 My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?

My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?

You cannot. The iPhone is locked to Softbank, and only they can unlock it. Problem is that Softbank will NOT unlock the phone, as they do not offer iPhone unlocking.
Buy an iPhone in the Phillipines.
PS Before you go on a rant at Apple, be aware that Apple does NOT unlock phones and they do not set unlocking policies. The carriers (Softbank in this case) set the unlocking policy.

Error reading the standard sequence from the document tables

Hi PM Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit
Edited by: Rohit Kumar on Jan 14, 2009 3:50 PM

Thanks a lot.
We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

SAP Patch :'Error reading the standard sequence from the document tables

Hi Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit

We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

How can I use the output value from SIMPLE PID to write something to the serial port?

I am working on my Senior Design Project that requires the use of incoming compressed air, propotional valves, continuous servo motors, and a serial servo motor microcontroller. I have figured out how to send byte sequences to the microcontroller through LabVIEW using the VISA serial write function. The motors are attached to the valves to control the flow rate. I have created my own simple feedback system using a bunch of case structures but I realized that I am basically trying to recreate the wheel (I basically was writing my own PID VI). I have an older version of LabVIEW (7.0 Express) and theres no way to upgrade or buy the PID toolkit, so I am stuck using the Simple PID VI. Also, the only way the motor works is sending an array of bytes to tell it to turn on/off, direction, and speed. Is there any way I can use the Simple PID VI in conjunction with the VISA SERIAL write function, or is there any other way I can communicate with the serial port using this pid vi? Any information would be appreciated.

Hi gpatel,
you know how to communicate to serial port, but you don't know how to send a value from SimplePID to serial port???
You know how to communicate, but then you don't know how to communicate???
You should explain this in more detail...
Edit:
From you first post you know what values your motor driver is expecting. You know which values the PID.vi is providing. Now all you need is a formula to reshape the values from PID to the motor. It's up to you to make such a formula. Unless you provide any details we cannot give more precise answers...
Message Edited by GerdW on 02-28-2010 08:35 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Using the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?

I am intending to upgrade to photoshop CC from photoshop CS6, my concern is is my computer is 6 years old and probably I will not be able to upgrade to a later mac operating system as I have mac os 10.9, and I may not be able to upgrade to a future version of photoshop, will I be able to use the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?, I know I can do this with Photoshop CS6.

There's no reason why you can't do both. You will always have CS6 to fall back on if the need should ever arise, the same as most of the regular posters here. But you could enjoy CC for as long as it suited you, and it has some very features and more are coming all the time.
We've seen two nice updates to Photoshop CC in the eight months since the subscription model went live. (Have I got that right?) So we can expect three a year or more, and there were some killer new features in 14.2. Heck, it would already break my heart if I had to go back to CS6. In another four years... It ain't gonna happen.

Using the ContactInsertOrUpdate method from the ContactWS but error msg rcv

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community]
Corsa
Contributor
I am getting the following error I do not know why or how to work around
it.
Method 'SetFieldValue' of business component 'Contact' (integration
component 'Contact') for record with search specification '[External 
 System Id] = "123456"' returned the following error:"Access 
denied.(SBL-DAT-00542)"(SBL-EAI-04375)
Does any out there have any ideas?
Previously when I tried to do the same action I got the following message:
Multiple matches found for instance of integration component 'Contact'
using search specification '[External System Id] = "123456"' in the
business component 'Contact', based on user key 'Contact User
Key:3'.(SBL-EAI-04390)
Both messages are baffling me. Please, please help
Product: CRM OnDemand
06-16-2006 04:35 AM
Re: Using the ContactInsertOrUpdate method from the ContactWS but error
msg rcvd
BigSlick
Valued Contributor
Hi Corsa,
Can you access the record in the online application. Perhaps someone has
changed the access rights for this Contact on the Contact Team ?
-BigSlick
06-20-2006 12:33 PM
Re: Using the ContactInsertOrUpdate method from the ContactWS but error
msg rcvd
Corsa
Contributor
I realise now that the field AccountID is readonly and cannot be assigned.
I was attempting to assign contactsList[count].AccountId to a value . I
believe, this is the reason I was getting the access denied error.
06-23-2006 11:10 AM
==============================================================================
Click on the board or message subject at the top to return.

Ok, so I hit a bump in the road. Just when I think I understand something It doesn't work correctly.
I implemented it I thought correctly. I looked up something on the sun website (core java) I used advice from here, and my professor finaly responded to me with almost identical instructions. So I did it
my RationalNumber.java no looks like this.
public class RationalNumber implements Comparable
//.....Break to new section
public float compute ()
 float value = getNumerator() / getDenominator();
 return value;
 public int compareTo(RationalNumber op2)
 if (Math.abs(compute() - op2.compute()) < .0001)
 return 0; //Equal
 if (compute() > op2.compute())
 return + 1; //Rational Number bigger
 if (compute() < op2.compute())
 return - 1; //Rational Number Smaller
 }I thought that would work fine, but it gives me an error when I compile it:
RationalNumber.java:8: RationalNumber is not abstract and does not override abstract method compareTo(java.lang.Object) in java.lang.Comparable
public class RationalNumber implements Comparable
 ^So now what, making it abstract only creates more errors....
Also, thanks ChuckBing, I'm glad you like the screen name, I've been using it for years.

Should I use the object returned from em.merge()

I am still confused how to use em.merge() correctly. I need to know if I should use the result of em.merge().
PersistentObject obj = new PersistentObject();
obj.setSomething("Value#1");
// Should I do this and continue to use the object returned from merge().
obj = em.merge(obj);
obj.setSomething("Value#2");

Chris,
First thanks for your and your teams awesome support.
The reason I always get confused with merge() is my misunderstanding about how clones and caching are handled. Let me give you 2 scenerios and could you tell me what the problems are, is any?
Scenerio #1: (using return from merge)
-- Start of Transaction #1
EntityObject obj = new EntityObject();
obj.setName("chris");
obj = em.merge(obj);
-- End of Transaction #1
-- Start of Transaction #2
obj.setName("scott");
obj = em.merge(obj);
-- End of Transaction #2
Is this ok, will I lose data, are the clones and cache ok?
Scenerio #2: (NOT using return from merge)
-- Start of Transaction #1
EntityObject obj = new EntityObject();
obj.setName("chris");
em.merge(obj);
-- End of Transaction #1
-- Start of Transaction #2
obj.setName("scott");
em.merge(obj);
-- End of Transaction #2
Is this ok, ?
These 2 scenerios are different in the fact that one uses the return from merge and one does not. Which one is correct, and what would the problem be with the wrong one?

Capture an image using the web camera from a web application

Hi All,
Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
I have a similar requirement like this,
1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
3) Upload the Image to the server from the temporary location.
Please share the details like, what can be used and how it can be used etc...
Thanks,
Suman

1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
Alternately, you might want to look into Adobe Flex for this particular application.

Can i have 2 Apple IDs using the same playlist from the same pc?

can i have 2 Apple IDs using the same playlist from the same pc?

Easiest way is to create separate computer logins with all your own info including your own iTunes library.
I recommend each individual not have more than one AppleID because you will have purchases on multiple accounts
You can use more than one AppleID in an iTunes library.
AppleID/iTunes =used for purchases.
iTunes library = iTunes and all media on your computer.

How to use the pps function from JCOP?

Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
 readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
 //If no readers has a card it ends the process
 if(readers.isEmpty()){
 System.out.println("\nNo card in the reader...");
 return;
 System.out.println("\nReader Type: "+readers.get(0).toString());
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
 } catch (Exception e) {
 e.printStackTrace();
 System.out.println("ATR: "+toHex(atr.getBytes()));
 //sending a data 11223344
 System.out.println("\nsending data: 11223344");
 byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
 System.out.println("Response data is:" + toHex(responsesend));
 //close terminal
 term.close();
 System.out.println("\nTerminal closed");I've got this output on the console:
StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
Protocol and parameter selection not supported by this terminal!
 at com.ibm.jc.JCTerminal.pps(Unknown Source)
 at com.test.essai.main(essai.java:46)
>
And If I take a look at the data exchanged with the card:
Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM

-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 System.out.println("ATR: "+toHex(atr.getBytes()));
 jcard = new JCard(term,atr,0);
 jcard.reset();
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
 } catch (Exception e) {
 e.printStackTrace();
 }The same pps is always send after each reset...

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
jake

Using the Hard Drive from my old iMac

I have just purchased a new 2.8 Intel core 2 duo iMac and was wondering if I could somehow use the hard drive from my old iMac.
What I have done is buy a case for the hard drive from my old iMac thus making it an external. The question that I have is that since it [the old hard drive] is running OS 10.4 will my new Intel iMac even recognize it.
I would like to somehow switch ALL my vast iTunes library from the old hard drive to my new Intel iMac without have to resort to making as many as 15 data disk. If such a thing is possible how do I go about doing so?
Another thing that I would like to do once my iTunes library is on my new Intel iMac is use the old hard drive [since it is 500GBs] as the platform for all my games and my publishing interest. Doing so would allow me to free up space that I could more readily use for other interest on the 350GB hard drive that my new iMac came with.
HOW do I go about wiping the old hard drive clean so that I can use it thus?
Thank you all for any and all help and insight that you might give me.

You might also consider connecting the two computers into a network, and then transferring the files you need, or even keep both computers online and use network sharing to access files from both computers.
In reference to your question, if you extract the hard drive from your old Mac and put it in an external case, your new Mac will read it no prob. (10.4 is compatible with 10.5). The hard drive can be formatted (wiped clean) using Disk Utility application (click Application, Utilities).
In terms of importing files from old to the new Mac, you might consider using using the automated OS X feature to transfer user files from another Mac.

Using the Matrix Sequencer from Reason Rewire with Audition

Similar Messages

Maybe you are looking for